These are the Traxxas 4x25mm Button-Head Hex Drive Machine Screws (6). 4x25 mm button-head machine screws with hex drive heads. Set of sixIncludes: Six 4x25mm Button Head Machine Screws Replacement part for these modelsMaxxSledgeUnlimited Desert...

These are the Traxxas 4x15mm Button-Head Hex Drive Machine Screws (6). These are used on the X-Maxx trucks.Includes: Six 4x15mm Button Head Machine Screws Replacement part for these modelsX-MaxxXRT

This is a pack of Traxxas 4x15mm Countersunk Head Head Machine Screws. Each package includes six screws.Replacement part for these modelsBIGFOOT No. 1 Officially Licensed ReplicaDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150...

These are the Traxxas Alias Ribbed Front Tires Pre-Mounted on Chrome Tracer 2.2" Wheels for the Traxxas Bandit XL-5 and VXL buggies. These are soft-compound tires. The wheels have a slot in hub that slides over the pin in the axle. FEATURES:Rubber...

This is the Traxxas Replacement Servo Gear Set for the 2085 Steering Servo IncludesOutput GearTop, center, and bottom reduction gearUpper and lower ball bearingsParts list Replacement part for these modelsX-MaxxXRT

This is a pair of Traxxas All-Star 2.8" Black Chrome Wheels for use on the front of 2WD electric trucks, front and rear of electric 4x4, and the rear of nitro 2WD trucks.SpecificationsOverall Diameter: 2.8" (71mm)Width: 1.92" (49mm)Includes: Two...

This is the Robinson Racing Extra Hard Steel 19-Tooth Pinion with 1 Mod Pitch and 5mm Bore.FeaturesExtra hardened steel construction for durabilityPrecision madeFor use in extreme conditionsIncludesOne 19 tooth pinion gearOne 4x4mm set...

These are the RPM Blue Rear Upper and Lower Suspension A-Arms for the Traxxas 1/16 E-Revo and 1/16 Grave Digger vehicles.Similar to RPM front A-arms (#80694), our rear arms eliminate nearly all of the A-arm slop typically found in stock Mini E-Revo rear...

This is the RPM Black Pinion Gear Carrying Case. These will hold up to 15 pinion gearsRPM designed this enclosed pinion case to hold each pinion on its own post. There is no need to tighten the setscrew to hold the pinions in place. Included is a...

These are the RPM Blue 4-40 Long Shank Rod Ends for 4.3mm/0.17" Ball Studs, perfect for many Associated, Losi, and HPI vehicles. When it comes to rod ends, RPM rod ends are the basis for comparison! Our rod ends are strengthened in all the right places,...

This is the RPM Mega Bearing Blaster for Bearings up to 1.25" (32mm) outside diameter, and 3/16" (5mm) inside diameter. The RPM Mega Bearing Blaster takes up where our original Bearing Blaster leaves off. The Mega Bearing Blaster can handle bearing sizes...

This is the LaTrax Alias Blue Replacement Canopy Set for the Alias Quadcopter.Features:Two-piece plastic constructionIncludes: Blue Canopy with three ScrewsSpecificationsLength: 3.4" (87.7mm)Width: 1.9" (47.5mm)Height: 0.78" (20mm)

This is the Robinson Racing Gen3 Slipper Kit with 60-Tooth 0.8M Steel Spur Gear for the Traxxas E-Revo Brushless trucks. This can also be used on the E-Maxx Brushless, but it will require running a larger pinion gear than stock in order to achieve...

These durable Traxxas 2.0 mesh wheels for the Nitro 4-Tec fit all popular on-road touring sedans. They come with superb pre-glued racing tires with contoured molded foam inserts. Their lower profile increases sidewall strength and contact patch. The...

This is the Team Integy Motor Heatsink with Twin Cooling Fans (Silver). For use on the Traxxas 1/10 Slash 4x4. FEATURES Twin built-in fans Silver alumimum heatsink construction INCLUDESMotor heatsink assembly with attached fan and BEC...

This is the Saito .82 AAC 4-Stroke Engine with Muffler (New Case) Features Redesigned crankcase adds to the durability of the engine with no change in performance Outstanding power-to-weight ratio Same size case as the Saito .72 SpecificationsType:...

These are the Traxxas Left or Right Half Shafts for use on the 1/16 E-Revo. FEATURES: Nylon construction Black in color INCLUDES:Two Internal Splined Half ShaftsTwo External Splined Half ShaftsFour Metal U-Joints REQUIRES: Installation on the vehicle

These are the RDLogics Drive Cups for the RDLogics Center CVD kit for the Traxxas T-Maxx 2.5

This is the Traxxas Rear Linkage Sway Bar Set for the Slash 4x4. Features: Nylon and steel construction Includes:2 Rod ends2 Ball studs2 Hollow balls

This is the Traxxas Aluminum Exhaust Header for the Revo and Slayer. Features: Aluminum construction Silver in color Fluted on tuned pipe end for better silicone coupler connection Heatsink engine mounting flange Specifications:Length: 59mm (2...

This is a set of RDLogics Exhaust Gaskets (2) for the HPI Baja 5B & 5T Tuned Exhaust Set from RDLogics.

These are the Traxxas Slash 4X4 Progressive Shock Springs: Front, +10% Rate, Pink (2). Features Custom wound for Slash 4X4 Progressive-rate design allows small-bump compliance without compromising big-hit capability Durable powdercoated...

This is the Traxxas Center Differential kit (complete)The optional center differential transfers power to the front and rear differentials independently for smooth power delivery in rough conditions and maximum corner speed. The sealed differential can...

This is the Robinson Racing Extra Hard 19-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...

These are the RPM Blue Front Upper & Lower Suspension A-Arms for Traxxas 1/16 E-Revo and 1/16 Grave Digger trucks.Upon the release of the Traxxas 1/16th Scale Mini E-Revo, RPM immediately started receiving requests for durability upgrades. What...

This is the Replacement Complete Gear Set for the EZ Start 2 System. The EZ Start 2 system is used on the Traxxas T-Maxx 2.5. FEATURES:White plastic gears INCLUDES:Eight different gearsOne metal 4mm sleeveOne 5x12.5mm shaft REQUIRES:The remainder of the...

This is a set of two RDLogics Aluminum Rear Lower Suspension Arms (Orange) for the HPI Baja 5B buggy and 5T truck.  These are much stronger than the stock arms, and they look great.  We have all of the matching aluminum...

This is the Integy Silver Aluminum Pushrod Set for the Traxxas Revo 2.5, 3.3, E-Revo, and Summit trucks.  This includes four standard length 101mm suspension pushrods.  These are a direct replacement for the stock pushrods.

This is the E-Flite Tail Drive Shaft Lower Bearing Block and Mount for the Blade 400 helicopters.

This is a Traxxas Jato 2.5 and 3.3 Single Speed Conversion Kit.  This is the optional part used to convert the 2-speed transmission to a single speed.Includes:One single speed top shaftOne single speed primary gear(20/30T)One 5mm e-clipTwo...

This is the Primary Clutch Assembly for the Traxxas Nitro Jato Stadium Truck. FEATURES:Metal ConstructionSilver in color INCLUDES:One Primary Clutch Assembly REQUIRES:Assembly onto Vehicle

This is Traxxas Jato Replacement Brake Pad and Hardware Set.  This includes two aluminum brake pads, two 3x15mm socket head screws, C clip, pin, hub and spacer.  This will help get your truck stopping like it should again!  You may...

This is a Traxxas Jato 2.5 and 3.3 Fuel Tank Rebuild Kit.  This includes one fuel tank cap spring, one rubber tank gasket, one metal cap pin, and two rubber grommets.

This is a set of two (2) Traxxas Jato Front GTR Shock Springs with the 0.9 Orange Weight Rating.

This is a set of six Traxxas 4x4 Blue Aluminum Button-Head Screws for the Jato 2.5 and 3.3 trucks.

This is the Team Integy 54-Tooth Steel Spur Gear for the Traxxas Jato 2.5, 3.3, and T-Maxx 3.3 trucks.  This is MUCH stronger than a plastic spur gear.  The Integy spur gears feature color-coded rings to allow easy identification...

This is a Green Tension Shock Spring Set for the Revo GTR Shocks. These springs are installed on the shock bodies. FEATURES:Red in colorTan band on spring indicates 4.1 tension rating INCLUDES:Two 4.1 rear shock springs REQUIRES:Nothing.  These are...

This is a Traxxas 40mm Vented Steel Brake Disc for the Revo 2.5 and 3.3 trucks.  All items are brand new in the factory package, with the full manufacturer warranty.

This is the Traxxas Mini Rally VXL Ford RS200 Blue Body Is it time to replace the Ford RS200 body on your Mini Rally? This tough polycarbonate body features the hottest ProGraphix paint with pre-applied decals. Body comes complete and ready to mount with...

This is the Traxxas Mini Rally VXL Ford RS200 White Body Is it time to replace the Ford RS200 body on your Mini Rally? This tough polycarbonate body features the hottest ProGraphix paint with pre-applied decals. Body comes complete and ready to mount...