This is the Traxxas Gear Cover with Motor Mount Hinge PostReplacement gear cover with motor mount hinge post and 3x10 mm screw with split and flat washers and 3x8 mm screwAccessory Part For1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4x41/16 Summit

This is the Traxxas Rebuild kit, GTR composite shocks (x-rings, bladders, pistons, e-clips, shock rod ends, hollow balls) (renews 2 shocks). This is Traxxas part number 7062Part Number: 7062 / TRA7062Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16...

This is the Traxxas Finned Aluminum Motor Mount The finned aluminum motor mount connects to the 7090 aluminum motor plate to provide a solid mounting surface for the Velineon 380 brushless motor. Does not fit Titan motor or 7380 motor plate Accessory...

This is the Traxxas Hollow balls (20). This is Traxxas part number 7028Part Number: 7028 / TRA7028Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16 Rally VXL1/16 Slash...

This is the Traxxas Rebuild kit, center differential (includes o-rings and diff gear covers). This is Traxxas part number 7014XPart Number: 7014X / TRA7014XFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16...

This is the Traxxas Input shaft (slipper shaft)/ bearing adapter (1)/ pin (1) Includes: Slipper clutch input shaft with bearing adapter and dowel pin Replacement Part ForBIGFOOT 4X4 Brushless Officially Licensed ReplicaFord Fiesta ST RallyFord F-150...

Traxxas BFGoodrich S1 Ultra-Soft Tires on SCT Split Spoke Chrome Red Beadlock Wheels for 4WD F/R, 2WD Rear Pair of ultra-soft S1-compound BFGoodrich Mud-Terrain T/A KM2 tires come pre-glued and mounted with foam inserts to chrome Split-Spoke SCT wheels...

This is the Traxxas Spur gear, 52-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential). This is Traxxas part number 6843RPart Number: 6843R / TRA6843RFits1/10 RallySlash 4x4 (low-CG)Slash 4x4 (standard chassis)Slash 4x4...

This is the Traxxas Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential). This 50-tooth (32-pitch) spur gear fits the optional 6814 center differential. Traxxas spur gears let you fine-tune the performance of...

This is the Traxxas Bulkhead tie bars, front & rear, aluminum (red-anodized).Set of front and rear bulkhead tie bars with a brilliant red anodized finish Accessory part forFord Fiesta ST RallyRustler 4X4Slash 4X4 UltimateSlash 4X4 VXLSlash...

This is the Traxxas Main frame, lower (black) / 1.6x5mm BCS (self-tapping) (4). This is Traxxas part number 6624Part Number: 6624 / TRA6624FitsAliasMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if...

This is the Traxxas Main frame (black)/ 1.6x5mm BCS (self-tapping) (4). This is Traxxas part number 6623Part Number: 6623 / TRA6623FitsAliasMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have...

This is the Traxxas Hub retainer, 17mm hubs, M4 X 0.7 (4) (use with #5853X, #6856X, #6469). This is Traxxas part number 5854Part Number: 5854 / TRA5854Fits1/10 Monster Jam Trucks1/10 RallyCraniacNitro SlashRustler VXLRustler XL-5SkullySlash 2WDSlash 2WD...

This is the Traxxas Spartan Rudder Mount and Pivot with Stainless Hardware.IncludesRudder Mount and PivotFour 4x14mm Stainless Steel ScrewsTwo 4mm Locknuts FitsSpartan

This is the Traxxas Stainless Steel Trim Tab and Hardware set for the Spartan and DCB M41 boats. Trim tabs (2) with 4x12 mm stainless screws (4)Replacement Part ForDCB M41 WidebodySpartan SRSpartan

This is the Traxxas 18-Tooth Pinion Gear with 0.8 Mod (compatible with 32-pitch) for 5mm Shaft motors. This can be used on vehicles such as the Hoss, E-Maxx Brushless, and 1/10 Summit.FeaturesHardened steel18 tooth0.8 Mod / 32 pitchFits 5mm shafts...

These are the Traxxas Transmission Gearbox Halves for Revo 3.3 and Slayer trucks. This includes the rubber access plug.IncludesFront and rear gearbox halvesRubber access plugFitsRevo 3.3SlayerSlayer Pro

This is the Traxxas Primary Clutch Assembly with Pins for Revo 3.3, T-Maxx 3.3, and Slayer trucks.FitsRevo 3.3SlayerSlayer ProT-Maxx 2.5RT-Maxx 3.3

This is the Traxxas Throttle Servo Mount with Mounting Screws for the Revo 3.3, Slayer, and Slayer Pro trucks.Fits:Revo 3.3SlayerSlayer Pro

This is a Traxxas 33-Tooth Output Gear and Spacers for the 1/10 E-Revo, Summit, and E-Maxx trucks.IncludesOne 33T output gearTwo spacersSpecificationsOuter diameter: 1.37" (35mm)Thickness: 1.02" (26mm) Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10...

This is the Traxxas aluminum (Orange Anodized Shock Caps Shock caps, aluminum (orange-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined...

This is the Traxxas VXL-3m Brushless Waterproof Electronic Speed Control (ESC). This is a stock replacement for Traxxas 1/16 scale brushless trucks, and it comes pre-wired with the Traxxas high-current connector.This is the stock replacement ESC...

These are the Traxxas Stainless Steel Suspension Hinge Pins with E-Clips. This set fits the Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede trucks.Includes:48mm Rear inner hinge pin (2)31.5mm Front and rear outer hinge pin (4)39mm Front...

These are the Traxxas 4x25mm Button-Head Hex Drive Machine Screws (6). 4x25 mm button-head machine screws with hex drive heads. Set of sixIncludes: Six 4x25mm Button Head Machine Screws Replacement part for these modelsMaxxSledgeUnlimited Desert...

These are the Traxxas 4x15mm Button-Head Hex Drive Machine Screws (6). These are used on the X-Maxx trucks.Includes: Six 4x15mm Button Head Machine Screws Replacement part for these modelsX-MaxxXRT

This is a pack of Traxxas 4x15mm Countersunk Head Head Machine Screws. Each package includes six screws.Replacement part for these modelsBIGFOOT No. 1 Officially Licensed ReplicaDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150...

These are the Traxxas Alias Ribbed Front Tires Pre-Mounted on Chrome Tracer 2.2" Wheels for the Traxxas Bandit XL-5 and VXL buggies. These are soft-compound tires. The wheels have a slot in hub that slides over the pin in the axle. FEATURES:Rubber...

This is the Traxxas Replacement Servo Gear Set for the 2085 Steering Servo IncludesOutput GearTop, center, and bottom reduction gearUpper and lower ball bearingsParts list Replacement part for these modelsX-MaxxXRT

This is a pair of Traxxas All-Star 2.8" Black Chrome Wheels for use on the front of 2WD electric trucks, front and rear of electric 4x4, and the rear of nitro 2WD trucks.SpecificationsOverall Diameter: 2.8" (71mm)Width: 1.92" (49mm)Includes: Two...

This is the Robinson Racing Extra Hard Steel 19-Tooth Pinion with 1 Mod Pitch and 5mm Bore.FeaturesExtra hardened steel construction for durabilityPrecision madeFor use in extreme conditionsIncludesOne 19 tooth pinion gearOne 4x4mm set...

These are the RPM Blue Rear Upper and Lower Suspension A-Arms for the Traxxas 1/16 E-Revo and 1/16 Grave Digger vehicles.Similar to RPM front A-arms (#80694), our rear arms eliminate nearly all of the A-arm slop typically found in stock Mini E-Revo rear...

This is the RPM Black Pinion Gear Carrying Case. These will hold up to 15 pinion gearsRPM designed this enclosed pinion case to hold each pinion on its own post. There is no need to tighten the setscrew to hold the pinions in place. Included is a...

These are the RPM Blue 4-40 Long Shank Rod Ends for 4.3mm/0.17" Ball Studs, perfect for many Associated, Losi, and HPI vehicles. When it comes to rod ends, RPM rod ends are the basis for comparison! Our rod ends are strengthened in all the right places,...

This is the RPM Mega Bearing Blaster for Bearings up to 1.25" (32mm) outside diameter, and 3/16" (5mm) inside diameter. The RPM Mega Bearing Blaster takes up where our original Bearing Blaster leaves off. The Mega Bearing Blaster can handle bearing sizes...

This is the LaTrax Alias Blue Replacement Canopy Set for the Alias Quadcopter.Features:Two-piece plastic constructionIncludes: Blue Canopy with three ScrewsSpecificationsLength: 3.4" (87.7mm)Width: 1.9" (47.5mm)Height: 0.78" (20mm)

This is the Robinson Racing Gen3 Slipper Kit with 60-Tooth 0.8M Steel Spur Gear for the Traxxas E-Revo Brushless trucks. This can also be used on the E-Maxx Brushless, but it will require running a larger pinion gear than stock in order to achieve...

These durable Traxxas 2.0 mesh wheels for the Nitro 4-Tec fit all popular on-road touring sedans. They come with superb pre-glued racing tires with contoured molded foam inserts. Their lower profile increases sidewall strength and contact patch. The...

This is the Team Integy Motor Heatsink with Twin Cooling Fans (Silver). For use on the Traxxas 1/10 Slash 4x4. FEATURES Twin built-in fans Silver alumimum heatsink construction INCLUDESMotor heatsink assembly with attached fan and BEC...

This is the Saito .82 AAC 4-Stroke Engine with Muffler (New Case) Features Redesigned crankcase adds to the durability of the engine with no change in performance Outstanding power-to-weight ratio Same size case as the Saito .72 SpecificationsType:...

These are the Traxxas Left or Right Half Shafts for use on the 1/16 E-Revo. FEATURES: Nylon construction Black in color INCLUDES:Two Internal Splined Half ShaftsTwo External Splined Half ShaftsFour Metal U-Joints REQUIRES: Installation on the vehicle