This is the Traxxas TRX-4 Ford Bronco Sunset Color Scheme Decal Sheet.Stock Replacement OnTRX-4 Ford Bronco

This is the Traxxas TRX-4 Ford Bronco Chrome Rear Bumper with Mount and 3x10 Buttonhead Capscrews (2).Stock Replacement OnTRX-4 Ford Bronco

This is a pair of Traxxas TRX-4 Orange Stripe 0.39 Rate GTS Shock Springs (natural finish).Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land RoverTRX-4 Tactical

These are the Traxxas TRX-4 Blue Fuel Canisters (2) with 3x8 Screw (1). Dress up your scale rig with these fuel cans!Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land RoverTRX-4 Tactical

This is the Ultra Power 2S-6S XH Balance Board. Ultra Power single-channel chargers include one balance board, whereas multi-channel chargers include two. This can be used as a replacement for a damaged board, or to allow for charging lithium batteries...

This is the Traxxas DCB M41 Boat Assembled Stuffing Tube with Liner. Replacement stuffing tube assembled with liner Replacement Part ForDCB M41 boats

These are the Traxxas Trim Tab Adjusters with Hardware. Blue-anodized aluminum trim tab adjusters fit over the existing stainless trim tabs. The stainless adjustment screws removes all the guesswork out of adjusting your boat's trim. Includes (2) 4x12 mm...

This is a pair of Traxxas Spartan Blue Aluminum Drive Strut Mounts. Blue-anodized aluminum drive strut mounts (2) Accessory Part ForSpartan SRSpartan

This is the Spektrum Tricera LHCP FPV Race Antenna. The Spektrum TriCera FPV Racing Antenna is designed to provide the Cleanest Video Signal and the maximum coverage your setup allows while providing superior durability. Spektrum RC teamed up with...

This is the Pro-Line X-Maxx Pre-Cut 2017 Ford F-150 Raptor Body (Clear/Unpainted) with decal sheet. This is a direct fit to the X-Maxx 6S and 8S trucks using the stock body mounting hardware and supports.This is a Pro-Line 2017 Ford Raptor Body for the...

This is the RPM Traxxas X-Maxx Rear Lower Bumper Mount. This is a direct fit on X-Maxx 6S and 8S trucks, and is required for use of the RPM low-visibility wheelie bar.The RPM Rear Bumper Mount is a beefy alternative to the small beam supports offered...

This is the RPM Traxxas X-Maxx Front Lower Bumper Mount. This is a direct fit on X-Maxx 6S and 8S trucks, replacing the stock TRA7733 bumper support.The RPM Front Bumper Mount for the Traxxas X-Maxx is a stout, ultra strong alternative to the small beam...

These are the Traxxas 4-Tec 2.0 Red Front and Rear Brake Calipers. These work on all 4-Tec 2.0 cars, including the Ford GT and Mustang GT.Stock Replacement On4-Tec 2.0 VXL Chassis4-Tec 2.0 XL-5 Chassis4-Tec 2.0 Ford GT4-Tec 2.0 Ford Mustang

These are the Traxxas 4-Tec 2.0 Front or Rear Stub Axles (2). These fit all versions of the 4-Tec 2.0, including the Ford GT and Mustang GT.Fits4-Tec 2.0

These are the Traxxas 4-Tec 2.0 Rear Driveshafts. Each package includes two driveshafts. These work on all versions of the 4-Tec 2.0, including the Ford GT and Mustang GT. Pair of rear steel driveshafts Replacement Part For:4-Tec 2.0 AWD Chassis4-Tec 2.0...

These are the Traxxas 4-Tec 2.0 Front Driveshafts. Each package includes two driveshafts. These work on all versions of the 4-Tec 2.0, including the Ford GT and Mustang GT.Fits4-Tec 2.0

These are the Traxxas 4-Tec 2.0 Ford GT Tail Lights, Mounts, Exhaust Tips, and Screws.Includes(2) Tail lights(4) Tail light mounts(2) Exhaust tips(1) Exhaust tip mount(2) 3x10 flathead screws(2) 3x8 Buttonhead Cap ScrewsFitsFord GT - 4-Tec 2.0

This is the Traxxas TRX-4 Scale Crawler Complete Rod End Set, which includes 10x Standard, 8x 10-Degree Angled, and 4x Offset rod ends.Includes(10) Standard rod ends(8) 10-Degree angled rod ends(4) Offset rod endsStock Replacement OnTRX-4 Crawler...

This is the Traxxas TRX-4 Graphite Silver Land Rover Defender Painted Body with Decals. The TRX-4 Land Rover Defender body comes fully painted and trimmed out of the bag with pre-drilled body holes. *Fits 324 mm wheelbase. Includes Decals Required: Body...

This is the Traxxas TRX-4 Red Land Rover Defender Painted Body with Decals. The TRX-4 Land Rover Defender body comes fully painted and trimmed out of the bag with pre-drilled body holes. *Fits 324 mm wheelbase. Includes Decals Required: Body accessories...

This is the Hot Racing Aluminum Steering Link Set for Traxxas X-Maxx 6S and 8S trucks. This replaces Traxxas part 7748 / TRA7748 toe links.FEATURES:CNC machined aluminum constructionBlack anodized colorYOU WILL RECEIVE:Two pre-assembled black aluminum...

This is the Hot Racing Blue Aluminum Upper Rear Differential Cover for the Traxxas X-Maxx 6S & 8S.FEATURES:- CNC 6061 aluminum with blue anodized finishYOU WILL RECEIVE:- One blue CNC aluminum rear differential cover

This is the Hot Racing Silver Aluminum Front Skid Plate for the Traxxas Slash 2WD trucks. This will fit XL-5 brushed and VXL brushless versions.FEATURES:Made of silver machined 3mm thick 6061-T6 aluminum.The mounting holes are pre-drilled and are...

This is the Hot Racing 28-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerReduced...

This is a pair of Vanquish Axial SCX10-II Black Anodized Aluminum Steering KnucklesFeatures Compatible with stock links Milled entirely from high quality billet aluminum Bolt-on realistic high steer arm adds scale appearance and double shear support...

This is the Traxxas 12-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore. 12-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Designed for steel spur gears. Traxxas pinion gears let you fine-tune the performance...

This is the Dynamite LiPo Voltage Checker and Warning Alarm. This tool checks 1-8 cell LiPo, Li-Ion, LiMN, or LiFe packs, reading total voltage and individual cell voltages. It can also be used as an alarm on-board aircraft or vehicles to let you know...

This is the Traxxas Aton Canopy Roll Hoop (White). This is Traxxas part number 7922Part Number: 7922 / TRA7922FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have any questions.

This is a pair of Traxxas X-Maxx Molded Toe Links (158mm center to center).FeaturesMolded composite plastic construction with steel ball cupsConnects steering assembly to each steering blockIncludes: Left and Right Toe LinkSpecificationsTotal Length: 6...

This is a pair of Traxxas X-Maxx and XRT 4x85mm Hardened Steel Suspension Hinge PinsFeatures Steel construction Fastens lower rear suspension arms to chassis IncludesTwo 4x85mm Suspension PinsSpecificationsDiameter: 0.16" (4mm)Length: 3.3"...

This is the Traxxas X-Maxx Receiver Box Seal Kit, including o-ring, seals, and silicone grease.FeaturesReplaces damaged or missing receiver box seal and cushionsSilicone grease helps to seal receiver box to chassisIncludesTwo Foam Receiver...

This is the Traxxas ExoCage, 1/16th Summit (includes mounting hardware). This is Traxxas part number 7220Part Number: 7220 / TRA7220Fits1/16 SummitMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you...

This is the Traxxas Gear set, transmission (includes 18T, 25T input gears, 13T idler gear (steel), 35T output gear, M3x13.75 screw pin). Transmission gear set includes 18-T and 25-T input gears, 13-T steel idler gear (steel), 35-T output gear, and M3x13...

This is the Traxxas Gear Cover with Motor Mount Hinge PostReplacement gear cover with motor mount hinge post and 3x10 mm screw with split and flat washers and 3x8 mm screwAccessory Part For1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4x41/16 Summit

This is the Traxxas Rebuild kit, GTR composite shocks (x-rings, bladders, pistons, e-clips, shock rod ends, hollow balls) (renews 2 shocks). This is Traxxas part number 7062Part Number: 7062 / TRA7062Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16...

This is the Traxxas Finned Aluminum Motor Mount The finned aluminum motor mount connects to the 7090 aluminum motor plate to provide a solid mounting surface for the Velineon 380 brushless motor. Does not fit Titan motor or 7380 motor plate Accessory...

This is the Traxxas Hollow balls (20). This is Traxxas part number 7028Part Number: 7028 / TRA7028Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16 Rally VXL1/16 Slash...

This is the Traxxas Rebuild kit, center differential (includes o-rings and diff gear covers). This is Traxxas part number 7014XPart Number: 7014X / TRA7014XFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16...

This is the Traxxas Input shaft (slipper shaft)/ bearing adapter (1)/ pin (1) Includes: Slipper clutch input shaft with bearing adapter and dowel pin Replacement Part ForBIGFOOT 4X4 Brushless Officially Licensed ReplicaFord Fiesta ST RallyFord F-150...

Traxxas BFGoodrich S1 Ultra-Soft Tires on SCT Split Spoke Chrome Red Beadlock Wheels for 4WD F/R, 2WD Rear Pair of ultra-soft S1-compound BFGoodrich Mud-Terrain T/A KM2 tires come pre-glued and mounted with foam inserts to chrome Split-Spoke SCT wheels...