This is the Traxxas Driveshaft Assembly, Left or Right w/ Hardware (1)Fully assembled, ready to install. Comes w/ Screw Pin.Fortified for hard launches and superior durability, Extreme-Duty driveshafts are 20% larger than standard driveshafts for...

This is the Traxxas Tail Light Assembly for 2021 Ford Bronco w/ Hardware (2) *Fits 9211 BodyIncludes:3x8mm BCS (4)Replacement Part For These Models:TRX-4 2021 Ford Bronco

This is the Traxxas Center Skidplate for Maxx (352mm Wheelbase) w/ Hardware4x20 CCS (4)3x10 CS (4)Replacement Part For These Models:Maxx

This is the Traxxas Battery Expansion Kit for Maxx (329mm Wheelbase)Allows for installation of taller battery packs in Maxx with standard chassis (329mm wheelbase)Replacement Part For These Models:Maxx

This is the Traxxas Battery Hold-Down (Front, Rear) for Maxx w/ 352mm Wheelbase *Fits Maxx with extended chassis (352mm wheelbase) IncludedBattery Hold-DownMounts (Front & Rear)Battery Compartment SpacersFoam PadsReplacement Part For These Models:Maxx

This is the Traxxas Chassis, Extended, for Maxx w/ 352mm Wheelbase Chassis for V2 (352 mm wheelbase) Maxx Replacement Part For These Models:Maxx w/WideMAXX

This is the Traxxas Rear Camber Links (TUBES Orange-Anodized 7075-T6 Aluminum) Specifications(2) TUBES Orange-Anodized 7075-T6 Aluminum (144mm)(4) Rod Ends Assembled with Steel Hollow Balls(1) 8mm Aluminum Wrench Accessory Part ForSledge

THis is the Traxxas Rear Camber Links (TUBES Red-Anodized 7075-T6 Aluminum) Specifications(2) TUBES Red-Anodized 7075-T6 Aluminum (144mm)(4) Rod Ends Assembled with Steel Hollow Balls(1) 8mm Aluminum Wrench Accessory Part ForSledge

This is the Traxxas Rear Camber Links (TUBES Green-Anodized 7075-T6 Aluminum) Specifications(2) TUBES Green-Anodized 7075-T6 Aluminum (144mm)(4) Rod Ends Assembled with Steel Hollow Balls(1) 8mm Aluminum Wrench Accessory Part ForSledge

These are the Traxxas 2.1" Front Wheels for Factory Five Hot Rod (2)Assembled, Glued Black with chrome wheels, 2.1" Response tires (front)Replacement Part For These Models:Factory Five '33 Hot Rod CoupeFactory Five '35 Hot Rod Truck

These are the Traxxas Front Suspension Arms for Factory Five Hot Rod (2)Replacement Part For These Models:Factory Five '33 Hot Rod CoupeFactory Five '35 Hot Rod Truck

This is the Traxxas Rear Body Post w/ HardwareIncludes:Rear Body PostFoam body washers (2)Pivot (2)Replacement Part For These Models:Factory Five '33 Hot Rod Coupe

This is the Traxxas Battery Hold-Down/Clip for 300mm Wheelbase w/ HardwareIncludes:Battery hold-downBattery clipHold-down postScrew pinPivot post screwFoam spacer *For 300mm wheelbaseReplacement Part For These Models:Factory Five '33 Hot Rod CoupeFactory...

This is the Traxxas Chassis for 300mm WheelbaseReplacement Part For These Models:Factory Five '33 Hot Rod CoupeFactory Five '35 Hot Rod Truck

This is the Traxxas Rear Body Mount for Clipless Body MountingReplacement Part For These Models:Chevrolet Corvette Stingray

This is the Traxxas Front Body Latch Mount for Clipless Body MountingReplacement Part For These Models:Chevrolet Corvette Stingray

This is the Traxxas Gearbox Cover HalvesGray gearbox halves (L&R) for Magnum 272R transmission. Will not fit standard Magnum 272 transmission.Replacement Part For These Models:Bandit VXLDrag SlashRustler VXLSlash VXLStampede VXL

This is the Traxxas Idler 30-T Gear w/ ShaftThe hardened-steel 30-tooth idler gear provides maximum durability and power transfer in Magnum transmissions. Use as a direct replacement for Magnum 272R transmissions or as an upgrade for standard Magnum 272...

This is the Traxxas Chrome Front Bumper for 1969 Blazer w/ HardwareChrome front bumper for the 1969 Blazer body.Accessory Part For These Models:TRX-4 1979 Chevrolet BlazerTRX-4 2021 Ford BroncoTRX-4 Equipped with TraxxTRX-4 Scale and Trail CrawlerTRX-4...

This is the Traxxas Chrome Front Bumper + Lens for 1972 Blazer w/ HardwareIncludes:Bumper, front (chrome)Bumper mountLens (left and right) (2)Lens mount (left and right) (2)3x10 BCS (2)2.6x6 BCS (4)Chrome front bumper for the 1972 Blazer body.Accessory...

This is the Traxxas Chrome Bumper Pads and Guards w/ HardwareAdd more scale realism to your Blazer with these chrome bumper guards. Includes guards, drill bit, and hardware. Fits 9126 or 9127 front bumpers.Accessory Part For These Models:TRX-4 1979...

This is the Traxxas Chrome Rear Bumper for 1969 -1972 Blazer w/ HardwareChrome rear bumper for the 1969 and 1972 Blazer body.Accessory Part For These Models:TRX-4 1979 Chevrolet BlazerTRX-4 2021 Ford BroncoTRX-4 Equipped with TraxxTRX-4 Scale and Trail...

These are the Traxxas Decal Sheets for Chevrolet Blazer (1969 -1972)Decal sheets for the 1969 and 1972 Blazer body.Accessory Part For These Models:TRX-4 1979 Chevrolet BlazerTRX-4 2021 Ford BroncoTRX-4 Equipped with TraxxTRX-4 Scale and Trail...

This is the Traxxas Bandit Body, Bandit, Pink (Painted w/ Decals)Is it time to upgrade your Bandit with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix paint with pre-applied decals. There’s no need to trim the body...

This is the Traxxas Gear Set for Micro Waterproof ServoReplacement gear set for 2080A servo. Does not fit 2080 or 2080X servos.Replacement Part For These Models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit

This is the Traxxas Waterproof Micro ServoThe 2080A waterproof micro servo gives you the freedom to drive in rain, mud, and snow.Replacement Part For These Models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit

This is the Traxxas Gear Set for Waterproof Sub-Micro ServoReplacement gear set for 2065A servo. Gears do not fit 2065 or 2065X servos.Replacement Part For These Models:1/18 LaTrax Desert Prerunner1/18 LaTrax Rally1/18 LaTrax Teton SummitTRX-4 1979...

This is the Traxxas Differential Gear, Side Cover Plate, Gasket w/ HardwareIncludes:Steel ring gearSide cover plateGasketX-rings (2)2.5x10mm BCS (4)Accessory Part For These Models:Bandit VXLDrag SlashRustler VXLSlash VXL

These are the Traxxas Tires, Front (Mickey Thompson ET Front) (2)Includes:Foam inserts (2)Accessory Part For These Models:Drag Slash

This is the Traxxas Heavy Duty Wheelie Bar MountReplacement heavy-duty wheelie bar mount for the 9460-series extended wheelie bar.Replacement Part For These Models:Slash VXLStampede VXLAccessory Part For These Models:Bandit VXLDrag SlashRustler...

This is the Traxxas Wheels For Wheelie Bar, Black 26mm (2)18mm (2)Replacement wheelie bar wheels for the 9460-series extended wheelie bar. Replacement Part For These Models:Drag Slash Accessory Part For These Models:Bandit VXLRustler VXLStampede VXL

This is the Traxxas Drag Slash Wing, Chevrolet C10 w/ HardwareIncludes:Wing, Chevrolet C10 Support/ Side plates (left & right)3x10 BCS (4)Accessory Part For These Models:Drag Slash

This is the Traxxas Drag Slash Decal Sheet, Chevrolet C10Accessory Part For These Models:Drag Slash

This is the Traxxas Sledge Body (Orange, Decals Applied)Painted body, decals appliedAssembled with front & rear body mounts and rear body support for clipless mounting.Accessory Part For These Models:Sledge

This is the Traxxas Sledge Body (Green, Decals Applied)Painted body, decals appliedAssembled with front & rear body mounts and rear body support for clipless mounting.Accessory Part For These Models:Sledge

This is the Traxxas Sledge Body (Clear, Unpainted)From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and Traxxas ProGraphix paint makes it easy to get professional quality results. Traxxas clear bodies...

This is the Traxxas Rear Bumper w/ LED lights Replacement for #9036 rear bumperAccessory Part For These Models:Hoss 4X4 VXLStampede 4X4 VXL

This is the Traxxas Front Bumper w/ LED lights Replacement for #9035 front bumperAccessory Part For These Models:Hoss 4X4 VXLStampede 4X4 VXL

This is the Traxxas ProGraphix Hoss 4x4 BodyFrom mild to wild, choose your own colors to personalize your body. The detailed graphics are fully painted, but the rest of the body is clear, so you can choose your own main body color. Simply grab a can of...

This is the Traxxas Maxx Duty Driveshaft Assembly w/ Hardware The Maxx-duty driveshaft come assembled and ready to install in your Maxx truck. Includes screw pin and fits front or rear, left or right.  Must be used with WideMaxx suspension arms...