These are a set of Traxxas 2.8" Mounted Wheels and tires FEATURES:2.8" All Star chrome wheelsRibbed pattern INCLUDES:Two 2.8" mounted tires, All Star chrome wheels and  inserts REQUIRES:Installation on vehicle SPECS:Outside diameter: 4"...

This is a pair of Talon Tires from Traxxas for use with the Jato. FEATURES:Talon lug designRubber constructionFoam tire insert INCLUDES:Two Talon 2.8" tiresTwo foam inserts REQUIRES:Jato wheels (TRA5574)Tire Glue, DTXR2002 SPECS:Outer Diameter: 4.6"...

This is the Robinson Racing Xtra Hard 5mm Bore Steel 13-Tooth 1.0 Module Pinion Gear.  This works in brushless setups for the Traxxas Revo 2.5, 3.3, and T-Maxx 3.3, and it also works with most 1/8 scale brushless conversions for Associated,...

This is a Spektrum Male and Female Bind Plug Set. This allows binding directly by plugging in to the receiver, or through a chargejack setup. Features Quickly and easily plugs directly into Spektrum receivers or through the charge jack on the switch

This a pair of Integy Evolution-3 Silver Aluminum Steering Blocks with Ball-Bearings for the Traxxas Revo 2.5 and 3.3 trucks.  These work on the front or the rear of the truck.  If you want to outfit the front and rear,...

This is the E-Flite Mini Helicopter Main Blade Holder: Blade 400  

This is the Differential Gear Set for the Traxxas Nitro Jato Stadium Truck. FEATURES:Steel constructionBlack in color INCLUDES:Two Differential Output GearsTwo Spider GearsTwo Spider Gear Shafts REQUIRES:Assembly onto Vehicle

This is a set of two Traxxas Jato 61mm Front or Rear Turnbuckles or Toe Links for the Jato 2.5 and 3.3 trucks.  These will work for the front or the rear.  This includes two 61mm tie rods, four rod ends, and four hollow balls.

This is a set of Traxxas Jato 2.5 and 3.3 Rear Stub Axle Carrier Spacers.

This is a set of two (2) Traxxas Jato Front GTR Shock Springs with the 1.3 Gold Weight Rating.

This is a Traxxas Jato 2.5 and 3.3 On-Board Radio System Wiring Harness.

This is a pair of Traxxas 2.2" Rear Lite Truck Wheels (white) for the Jato trucks, as well as the electric Rustler and electric Stampede.  These are 2.2-inches in diameter, have a 12mm hex, and require 2.2" tires. ...

This is the Team Integy Blue Aluminum Wheelie Bar for the Traxxas Jato 2.5 and 3.3 trucks.  This looks awesome, and it helps prevent your high-performance Jato truck from flipping over backwards onto its lid.  This prevents damage to...

This is the Team Integy Silver Aluminum Heavy-Duty Wheelie Bar for the Traxxas Revo 2.5 and 3.3 trucks.  This looks awesome, and it helps prevent your high-performance Revo truck from flipping over backwards onto its lid.  This prevents...

This is the Team Integy Silver Aluminum Engine Mount for the Traxxas Revo 2.5, 3.3, Slayer, and Slayer Pro trucks. This mount attaches engine to the chassis. FEATURESAluminum construction, silver in colorDirect fit hop-up requires no...

This is an E-Flite Main Frame Set for the Blade CX helicopter.

This is a pair of 5.4 rate (pink) Shock Springs for the Traxxas Revo. FEATURES:Red in color (small pink square indicates spring type)Metal construction INCLUDES:2 springs REQUIRES:Installation on the...

This is the 2.6 rate Spring Set for the Traxxas GTR Shocks used on the Revo. FEATURES:Spring Steel ConstructionRed Outer Nylon CoatingYellow 2.6 tension rating INCLUDES:Two Red 2.6 Springs for the Traxxas GTR Shocks used on the...

This is a set of two Traxxas Talon Tires with Gemini 3.8" Chrome Wheels.  These wheels and tires are a direct replacement for the Revo and T-Maxx 3.3.  They feature soft compound treaded rubber and a low profile design...

This is a Traxxas Progressive 3 Rocker Arm Set for the Revo 2.5 and 3.3 trucks.  These fit TRA5319 and TRA5319X pushrods.  If you need the pushrods too, search our store for the listed part numbers.

This is a Traxxas Long Travel Rocker Arm Set for the Revo 2.5, 3.3, E-Revo, Summit, and Slayer trucks. These fit TRA5318 and TRA5318X pushrods. If you need the pushrods too, search our store for the listed part numbers.

This is a package of Traxxas Small Rod Ends and Hollow Balls for the Revo 2.5 and 3.3 trucks.  These are used on the steering linkages of the Revo. FEATURES:Plastic constructionBlack in colorMetal Pivot Balls INCLUDES:Six Rod EndsSix Pivot...

This is a Traxxas Revo 2.5 and 3.3 Steering Servo Mount Set.  This includes two sets of servo mounts.

The Tamiya RS-540 sport tuned motor is an economical high performance motor for on- and off-road vehicles.  It will work in many Tamiya and other vehicles (check instruction manual for applicability).  This comes with 2" wire leads with bullet...

This is the Bulldog HO Racing Brass Axle Spacer 4mm x 0.40mm x 1.65mm hole The Bulldog axle spacer is precision made and features a smooth surface for reduced friction.  For proper gear mesh, install one or more metal spacers on the axle which are...

This is Bulldog HO Racing Brass Axle Spacer 4mm x 0.60mm x 1.65mm hole The Bulldog axle spacer is precision made and features a smooth surface for reduced friction.  For proper gear mesh, install one or more metal spacers on the axle which are...

This is the Bulldog HO Racing Brass Axle Spacer 4mm x 0.50mm x 1.60mm hole The Bulldog axle spacer is precision made and features a smooth surface for reduced friction.  For proper gear mesh, install one or more metal spacers on the axle which are...

This is the Bulldog HO Racing Brass Weight Traction Bar and Button Set This Brass Traction Bar and Button Set is to fit the Bulldog BDR Turbo Chassis and allows you to run in Brass Class Races or just for fun with sideways sliding with less...

This is the Bulldog HO Racing Brass Weight Button Set These Brass Buttons go under the front axle in location holes on the Bulldog BDR Chassis and the Viper V1 Chassis IncludesOne Brass Button Set

This is the Bulldog HO Racing Brass Weight Traction Bar Bulldog Brass Traction Bar to fit Bulldog and AFX Turbo Chassis. This replaces the traction magnet for brass class racing and for those who like to get less grip and sideways sliding. Includes(1)...

This is the Bulldog HO Racing 4mm x 1.16mm x 1.60mm Brass Axle Spacer This Bulldog .046-inch thick rear axle spacer is precision made and feature a smooth surface for reduced friction. The spacer is made to slide onto a .0595" or .0625" diameter axle...

This is the Bulldog HO Racing AFX SRT Neo Magnet Holder This Neo Magnet Holder is fitted to the SRT Bulldog range and the AFX SRT cars. It can also be fitted to a standard Turbo car with the choice of BDR7890 or BDR7891 Neo Magnets. Includes(1) Neo...

This is the Bulldog HO Racing Magnet Retainer Clip The Magnet Retainer Clip fits the Bulldog BDR and the Tomy AFX Turbo/SRT Chassis. Includes(1) Magnet Retainer Clip

This is the Bulldog HO Racing Crown Gear Retainer 1.47 Axle Hole The 1.47 Axle Hole Crown Gear Retainer is standard to fit Bulldogs and the AFX Mega G+ and Viper chassis. Includes(1) Crown Gear Retainer

This is the Bulldog HO Racing Gear Set: AFX SG & SRT and Bulldog 25T Crown Gear / 7T Pinion Gear This Gear Set is standard to fit early Bulldogs and the AFX SG and SRT chassis. Crown Gear is 25T, Pinion gear is 7T. Includes(1) 25T Crown Gear(1) 7T...

This is the Bulldog HO Racing Gear Set: AFX Turbo and Bulldog 22T Crown Gear / 7T Pinion Gear This Gear Set is standard to fit early Bulldogs and the AFX Turbo chassis. Crown Gear is 22T, Pinion gear is 7T. Includes(1) 22T Crown Gear(1) 7T Pinion Gear

This is the Bulldog HO Racing 7T Pinion Gear 7T Pinion Gear is the standard fit all Bulldogs. The Pinion gear is a press fit to the AFX Turbo can motor shaft (1.5mm diameter) and meshes with the AFX Turbo 22 tooth crown gear. Includes(1) 7T Pinion Gear

This is the Bulldog HO Racing Gear Set: Crown Gear 23T / Pinion Gear 7T This Gear Set is standard to fit all Bulldogs. Crown Gear is 23T, Pinion gear is 7T.  It will also work with AFX Turbo and SRT chassis. Includes(1) 23T Crown Gear(1) 7T Pinion...

This is the Traxxas Red Aluminum Wheelie Bar Side Plates (2) Add strength and style to your TRA9460 extended wheelie bar with these brightly-anodized aluminum side plates.

This is the Traxxas Pink Aluminum Wheelie Bar Side Plates (2) Add strength and style to your TRA9460 extended wheelie bar with these brightly-anodized aluminum side plates.