This is the GPM Racing Orange Aluminum Rear Bumper with D-Rings for the Traxxas 1/10 E-Revo 2.0 VXL, Revo 3.3 nitro, as well as previous generation 1/10 E-Revo trucks. Whether you're building a realistic monster truck or the ultimate off-road basher,...

These are the GPM Racing Gunmetal Aluminum 17mm Extension Hubs with 12mm Hex for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and other trucks listed below. This is a full set of four extensions. Made of 6061-T6 aluminum, these are a great option...

This is the GPM Racing Red 1/10 Scale Ground Anchor Chain & Hook for RC Rock Crawlers, Scalers, Trail trucks, and other 1/10 scale vehicles. The arms on the anchor fold down when not in use, making it easy to mount discretely on your scale truck body. ...

This is the GPM Racing Silver Aluminum 1/10 Scale Step Ladder for RC Rock Crawlers, Scalers, Trail trucks, and other 1/10 scale vehicles. This foldable ladder is the perfect addition to any ultra-custom Traxxas TRX-4 or other scale build.

This is a pair of GPM Racing Black Aluminum Rear Axle Hubs for the Traxxas Unlimted Desert Racer trucks. Made of 6061-T6 aluminum and with an anodized finish, these look great and are super durable. Mounting hardware is included.These fit in place of...

This is the GPM Racing Red Aluminum 25T Spline Clamping Servo Horn for Traxxas TRX-4 scale trail trucks and rock crawlers. Made of 6061-T6 aluminum, these are a must-have upgrade on TRX-4 trucks to replace the stock plastic arm. Stainless steel hardware...

This is the GPM Racing Black Stainless Steel and Aluminum Front CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints, with the main...

This is the GPM Racing Gunmetal Aluminum Rear Shock Tower for Traxxas Slash 2WD, Rustler 2WD, and Stampede 2WD trucks. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel mounting...

This is the GPM Racing Blue Rear Suspension Mount Bulkhead Tie Bar for Traxxas Rustler 4x4 trucks. This single piece design is made of 6061-T6 aluminum and includes stainless steel mounting hardware.This upgrade replaces Traxxas part 6823 tie bars and...

This is the GPM Racing Green Aluminum Front Shock Tower and Carbon Fiber Body Mount Set with Silver Posts for Traxxas Rustler 2WD trucks. This is made of 6061-T6 aluminum and carbon fiber plate for durability and fantastic looks.These are an upgraded...

This is the GPM Racing Blue Aluminum Front Skid Plate Set for the Traxxas 1/10 E-Revo 2.0 VXL Brushless trucks. Made of 6061-T6 aluminum and finished in anodized coloring, these are super durable and help make your truck stand out! Stainless steel...

These are the GPM Racing Gunmetal Aluminum Rear Stub Axle Carriers for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehicles.This is a direct replacement for Traxxas part 3752 hub carriers.Accessory Part ForTraxxas 1/10 Monster Jam...

This is the Associated Factory Team Universal Tire Balancer. A balanced tire on any type of RC car can drastically improve the handling characteristics and decrease drivetrain wear by reducing rotational vibration. The new FT Tire Balancer offers a...

These are the Traxxas Unlimited Desert Racer Black Aluminum Rear Upper Suspension Links (2). These measure 10x206mm, center to center, and come pre-assembled with hollow balls installed in the link ends.Accessory Part ForUnlimited Desert Racer (UDR)

These are the Traxxas Unlimited Desert Racer Red Aluminum Rear Upper Suspension Links (2). These measure 10x206mm, center to center, and come pre-assembled with hollow balls installed in the link ends.Accessory Part ForUnlimited Desert Racer (UDR)

These are the Pro-Line Impulse 1.9 Black Plastic Internal Bead-Loc Rock Crawler Wheels. Pro-Line is proud to introduce the new Impulse 1.9" Black Plastic Internal Bead-Loc Wheels that are Proudly Made in the USA!These all-new Impulse wheels are designed...

These are the Traxxas E-Revo 2 Front and Rear Chassis Supports with Hardware.Stock Replacement OnE-Revo 2.0

This is the Traxxas Unlimited Desert Racer Rear Bumper and Bumper Extension.Stock Replacement OnUnlimited Desert Racer (UDR)

These are the Traxxas Unlimited Desert Racer BFGoodrich Baja KR3 Tires on Black/Red Method Race Wheels (2). The tires are pre-mounted on the wheels with foam inserts installed.Accessory Part ForUnlimited Desert Racer (UDR)

This is the Traxxas Pink Front Bumper and Mount for Stampede 2WD, Skully, Craniac, and 1/10 Monster Jam trucks.Fits1/10 Monster Jam TrucksCraniacSkullyStampede 2WD

This is a pair of Traxxas TRX-4 Crawler 12mm Hex Wheel Hubs with Stub Axle Pins. This includes two hex hubs, two pins, and two screw pins.Stock Replacement OnTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land Rover DefenderTRX-4 Tactical

These are the Traxxas TRX-4 Crawler Portal Drive Caster Blocks and Kingpin Bushings. This includes two castor blocks and four kingpin bushings.FitsTRX-4

This is the Hot Racing Stainless Steel Conical Prop Nut for the Traxxas Spartan, Spartan SR and DCB M41 Catamaran Boats.FEATURES:- CNC machined stainless steel construction- Replaces factory hex nut with hydrodynamically efficient conical nut for reduced...

This is the Hot Racing Short 13-Tooth 32-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit a wide variety of vehicles, including the Traxxas 1/10 E-Revo, E-Maxx, 1/10 Rally, Slash 4x4, and Stampede 4x4 XL-5, and Stampede 4x4 VXL trucks...

This is a Banana Plug to EC5 Connector Charging Adapter Lead. This allows for charging a battery equipped with the EC5 plug from a charger with banana output jacks.

This is the Traxxas Aton Rotor Blade Set (2) (White) w/Screws. This is Traxxas part number 7927Part Number: 7927 / TRA7927FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have...

These are the Traxxas X-Maxx Battery Hold-Down Mounts with ScrewsFeatures:Molded composite plastic constructionFastens to chassis top brace and holds battery hold downs in placeIncludes:Four Battery Hold Down Mount SectionsFour 3x18mm Cap Screws

This is the Traxxas Tires & wheels, assembled, glued (12-spoke red chrome wheels, slick tires) (2). Give your LaTrax Rally a new set of treads with these pre-glued wheels and tires. Slick racing tires come pre-mounted to 12-spoke wheels so they're...

This is the Traxxas Tires & wheels, assembled, glued (12-spoke blue chrome wheels, slick tires) (2). Give your LaTrax Rally a new set of treads with these pre-glued wheels and tires. Slick racing tires come pre-mounted to 12-spoke wheels so they're...

This is the Traxxas Tires & wheels, assembled, glued (12-spoke black chrome wheels, slick tires) (2). Give your LaTrax Rally a new set of treads with these pre-glued wheels and tires. Slick racing tires come pre-mounted to 12-spoke wheels so they're...

This is the Traxxas Tires & wheels, assembled, glued (12-spoke chrome wheels, slick tires) (2). Give your LaTrax Rally a new set of treads with these pre-glued wheels and tires. Slick racing tires come pre-mounted to 12-spoke wheels so they're ready...

This is the Traxxas Tires, slick (2). Set of two slick tires. Fits: Front or Rear. Replacement Part For1/18 LaTrax Rally1/18 LaTrax Rally VR46

This is the Traxxas Motor Plate This brightly-anodized aluminum motor plate keeps your motor tight during intense high-flying action with a touch of style. Replacement Part ForFord Fiesta ST RallyFord Fiesta ST Rally BrushlessFord Fiesta ST RallyJato 4X4...

This is the Traxxas Push rods, aluminum (red-anodized) (4) (assembled with rod ends). This is Traxxas part number 7118XPart Number: 7118X / TRA7118XFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Grave Digger1/16 SummitMore detail coming soon!...

This is the Traxxas Lower chassis, low CG (blue). This is Traxxas part number 5831APart Number: 5831A / TRA5831AFitsSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD VXL (low CG)Slash 2WD XL-5More detail coming soon! Please check your vehicle manual...

This is the Traxxas Spartan Rudder Pushrod, Servo Horn and Hardware.Includes:Rudder pushrodServo horn3x18mm buttonhead cap screw3x15mm cap screw3x6mm cap screw3mm locknut FitsSpartan

This is the Traxxas Spartan Radio Tray, Retainer, Stuffing Tube Clamp and Hardware.IncludesOne radio trayTwo radio tray retainersOne stuffing tube clampTwo 4x16mm stainless steel buttonhead cap screwsTwo 4x10mm stainless steel buttonhead cap...

This is a pair of Traxxas Talon Tires with Foam Inserts, Pre-Mounted on 3.8" Chrome Wheels with 17mm Splined Hex Hubs. These can be used on 1/10 E-Revos, Revo 3.3, E-Maxx, T-Maxx, and Summit trucks using 17mm Splined Hexes.Features Plastic chrome...

This is a pair of Traxxas 15x24x5mm Blue Rubber-Sealed Ball Bearings.Features Steel construction with blue rubber seals Used in the front and rear differentials of the X-Maxx Includes: Two 15 x 24 x 5mm Blue Rubber Sealed Ball...

This is a set of Traxxas 3x30mm Cap-Head Shoulder Screws and Draglink Shoulder Screws for the Bandit, Nitro Slash, Rustler XL-5, and Slash 2WD XL-5 trucks.Includes:(2) 3x30mm Bellcrank Screws(2) 3x5mm Draglink ScrewsFitsBandit VXLBandit XL-5Nitro...