This is the GPM Racing Gunmetal Aluminum Rear Shock Tower for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rally, and Telluride vehicles. Made of 6061-T6 aluminum, these look awesome and improve the strength of your car or truck. Full mounting hardware is...

This is the GPM Racing Gunmetal Aluminum Front Shock Tower for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rally, and Telluride vehicles. Made of 6061-T6 aluminum, these look awesome and improve the strength of your car or truck. Full mounting hardware is...

These are the GPM Racing Orange Aluminum Front Caster Blocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and XO-1 vehicles. Made of 6061-T6 aluminum and anodized for a spectacular finish, these feature bearing-supported kingpins for...

This is the GPM Racing Green Aluminum Steering Bellcrank Set for the Traxxas Slash 2WD, Rustler 2WD, and Bandit vehicles. Made of 6061-T6 aluminum, these are a great way to tighten up your steering.This is an upgraded replacement for Traxxas part 3743 or...

This is the Traxxas Front Shock Tower. Replacement front shock tower.Replacement Part ForHoss 4X4 VXLRustler 4X4 VXLRustler 4X4

These are the Traxxas Unlimited Desert Racer Satin Black Chrome-Plated Front Upper Left & Right Suspension Arm Mounts. Deck out your UDR with the full line of Traxxas satin black chrome-plated accessories for an ultra-realistic appearance.Accessory Part...

These are the Traxxas Method 105 Charcoal Gray Beadlock 2.2" Wheels (beadlock rings sold separately) for the Traxxas TRX-4 and other 1/10 rock crawlers. The wheels have a standard 12mm hex.Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land...

This is a set of four Traxxas TRX-4 Red Aluminum 2.2" Beadlock Rings with 2x10 Capscrews (48) for use with Traxxas 2.2" Beadlock Wheels, such as the Method 105 wheels.Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land Rover DefenderTRX-4...

These are the Pro-Line Hyrax 1.9 G8 Rock Terrain Truck Tires with Foam Inserts. The future of 1.9" Tire Performance has arrived with Pro-Line's all-new Hyrax Tire!Designed from the ground up for maximum grip on the toughest terrain, the Hyrax tire is...

This is the Savox SC-0253MG Standard Digital Metal Gear Servo, putting out 83 oz/in @ 6V. The SC-0253MG is a budget friendly, digital standard servo with metal gears and a bearing support for those wanting more than what a standard servo offers...

These are the Traxxas Blue Aluminum 17mm Splined Hex Wheel Hubs with Pins and Set Screws. This includes four hubs, four pins, and four set screws.  17 mm blue-anodized aluminum wheel hubs combine high-profile looks with superior strength. The...

This is the Traxxas Unlimited Desert Racer 51-Tooth Center Differential Spur Gear. The 51-tooth differential spur gear (32-pitch) lets you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed...

These are the Traxxas Unlimited Desert Racer Left and Right Axle Carriers.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas Unlimited Desert Racer Front Skidplate and Steel Support.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas Unlimited Desert Racer Single 4S LiPo BAttery Jumper, which allows the Traxxas VXL-6s ESC to run on single 4S 14.8V LiPo battery pack.Accessory Part ForUnlimited Desert Racer (UDR)

This is the Traxxas X-Maxx and XRT Temperature and Voltage Sensor.Accesory Part For X-Maxx XRT

This is the Traxxas E-Revo 2.0 Transmission Skidplate and Cover.Stock Replacement OnE-Revo 2.0

These are the Traxxas 12x21x5mm Blue Rubber Sealed Ball Bearings (2) used on the E-Revo 2.0 trucks.Stock Replacement OnE-Revo 2.0

This is pair of Traxxas Red Rear Springs (2.9 rate) for use with XXL Ultra ShocksStock Replacement On1/10 Monster Jam TrucksCraniacT-Maxx 3.3Accessory Part For1/10 Monster Jam TrucksNitro StampedeRustler VXLRustler XL-5SkullySlash 2WDSlash 2WD Ford...

This is the Traxxas Bandit Hawaiian Painted Body. This is a direct fit for the Bandit XL-5 and VXL buggies. Is it time to upgrade your Bandit with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix paint with pre-applied...

This is the Traxxas 4-Tec 2.0 Ford GT Red Pre-Painted Body with Decals. This body is even pre-cut, making for quick final installation!Note: Tail lights, exhaust tips, & mounting hardware (Traxxas part #8314) are not includedFits4-Tec 2.0

This is the Traxxas Slash 2WD Pink Rear Bumper and Mount. This fits all versions of the Slash 2WD short-course truck.FitsSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD XL-5

These are the TraxxasBoat Blue Aluminum Drive Strut Mounts Blue-anodized aluminum drive strut mounts (2) Replacement Part ForDCB M41 Widebody Accessory Part ForDisruptor

This is the Traxxas Pink Aluminum Steering Bellcrank Set for the Slash 2WD, Rustler, and Bandit vehicles. These will fit XL-5 brushed and VXL brushless trucks.If installing on a vehicle that currently has a servo saver built into the bellcrank, we...

This is the Traxxas 22-Tooth 48-Pitch Pinion Gear with Set Screw. This designed for use with the 4-Tec 2.0, but can also be used with any vehicle that could use a 22T 48-pitch pinion.Fits4-Tec 2.0

This is a pair of Pro-Line Badlands MX43 Pro-Loc Tires for Pro-Loc X-Maxx Wheels. These tires stand a massive 8.3-inches tall and are constructed with an ultra-durable anti-ballooning tire compound to hold up better under the extreme performance of the...

This is the Integy Steel Roll Cage for Traxxas T-Maxx 3.3 model 4907 and 4908 series trucks. Add some real-world strength to your vehicle with this Steel Roll Cage add-on. The cage is welded into one piece for strength and durability. Finished in the...

These are the the Vanquish Incision #8 Wheel Hubs for use with Incision wheels. This set features an offset of 0.825" and provides a track width change of +0.80" (+20.3mm) from the stock #4 0.425" Incision hubs.Features Compatible with Incision...

These are the the Vanquish Incision #5 Wheel Hubs for use with Incision wheels. This set features an offset of 0.525" and provides a track width change of +0.20" (+5.1mm) from the stock #4 0.425" Incision hubs.Features Compatible with Incision...

These are the the Vanquish Incision #4 Wheel Hubs for use with Incision wheels. This set features an offset of 0.425" and match the stock hubs included with Incision wheels.Features Compatible with Incision wheels* Sold in pairs Increments of .100...

This is the RPM Traxxas X-Maxx Low Visibility Wheelie Bar. This must be used with the RPM81762 rear bumper mount. With the mount, it can be used on both X-Maxx 8S and 6S trucks.RPM Low Visibility Wheelie Bars are designed to take the stress off of the...

This is the Traxxas 4-Tec 2.0 Motor Plate. This fits all 4-Tec 2.0 cars, including the Ford GT and Mustang GT.Stock Replacement On4-Tec 2.0 VXL Chassis4-Tec 2.0 XL-5 Chassis4-Tec 2.0 Ford GT4-Tec 2.0 Ford Mustang

These are the Traxxas 4-Tec 2.0 Inner Drive Cups and Screw Pins. These fit all versions of the 4-Tec 2.0, including the Ford GT and Mustang GT.Includes2 inner drive cups2 screw pinsFits4-Tec 2.0

These are the Traxxas 4-Tec 2.0 Left and Right Stub Axle Carriers. These fit all versions of the 4-Tec 2.0, including the Ford GT and Mustang GT. Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisChevrolet Corvette StingrayFactory Five...

These are the Traxxas TRX-4 Scale Crawler 2-Speed Drive Hub, Shift Dog, Shift Fork, Shaft Seal, and 2-Speed Linkage.Stock Replacement OnTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land Rover DefenderTRX-4 TacticalAccessory Part ForTRX-4 SportNote: Accessory...

These are the Traxxas TRX-4 Crawler Red Bumper D-Rings and Mount Screws. This includes four D-rings and four 2.0x12mm screws.FitsTRX-4

These are the Traxxas TRX-4 Crawler Grey Bumper D-Rings and Mount Screws. This includes four D-rings and four 2.0x12mm screws.FitsTRX-4

These are the Traxxas 5x8x2.5mm Black Rubber Sealed Ball Bearings (2). Each package includes two bearings. Pair of 5x8x2.5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate...

These are the Traxxas 2.5x16mm Cap-Head Hex Machine Screws (6). Each package includes six screws.FitsTRX-4

This is the Hot Racing Chassis Cover Dirt Guard for Traxxas X-Maxx 6S and 8S trucks. The chassis cover attaches to the chassis with easy-to-apply hook and loop tape; has zipper chassis access; and uses a breathable Nylon mesh to repel water and protect...