This is the Savox SB-2290SG Monster Torque Brushless Steel Gear Servo with massive output at 694 oz/in of torque @ 7.4V. The powerful "Monster" performance series from Savox utilize an all aluminum case, unique brushless motor and controller technology...

This is the Traxxas E-Revo 2 Aluminum Heavy-Duty Differential Carrier, Gaskets & Spacers. This is the stock center diff carrier, and can also be used as an upgrade for the front and rear diffs.The set includes an aluminum diff carrier, 2 X-ring gaskets,...

These are the Traxxas E-Revo 2 Front/Rear 5.0mm Steel Toe Links (2). These will work on the front or rear.Stock Replacement OnE-Revo 2.0

These are the Traxxas Unlimited Desert Racer Grey Front/Rear Brake Calipers (4).Stock Replacement OnUnlimited Desert Racer (UDR)

This is a pair of Traxxas Unlimited Desert Racer 139mm GTR 0.937 Rate Orange Stripe Progressive Shock Springs.Stock Replacement OnUnlimited Desert Racer (UDR)

These are the Traxxas 4-Tec 2.0 Steel Rear CV-Driveshafts (2). Improve durability and performance of your car with these steel upgrade shafts.Accessory Part For4-Tec 2.0 VXL4-Tec 2.0 XL-54-Tec 2.0 Mustang4-Tec 2.0 Ford GTRequires: TRA8353X drive cups...

These are the Traxxas 4-Tec 2.0 34mm Steel Toe Links (2).Stock Replacement On4-Tec 2.0 VXLAccessory Part For4-Tec 2.0 XL-54-Tec 2.0 Mustang4-Tec 2.0 Ford GT

This is a pair of Traxxas White Rear Springs for XXL Ultra Shocks. These are the stock springs found on many vehicles such as the Stampede 2WD, 4x4, and Rustler trucks. Replacement Part ForHoss 4X4 VXLRustler 4X4Rustler VXLRustlerStampede 4X4 VXLStampede...

This is the Traxxas LED Light Y-Harness for the Summit 1/10 truck, allowing power to get to the servos and LED lights.  This works on the Summit trucks with the TQ 2.4GHz radios system.

This is the Ultra Power UP200 DUO 200W Dual Port Multi-Chemistry AC/DC Charger for LiPo, LiIon, LiFe, LiHV, NiCd, NiMH, and Pb batteries. The UP200DUO is perfect for the pilot or driver that needs to charge two batteries simultaneously. Producing 200...

This is the Traxxas DCB M41 Boat Motor Mount and Flex Cable Guard.FitsDCB M41 boats

This is the Traxxas TRX-4 Scale Crawler Rear T-Lock Cable.Stock Replacement OnTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land Rover DefenderTRX-4 TacticalAccessory Part ForTRX-4 Sport

This is the Traxxas TRX-4 Roof Basket for use with the #8011 Series Bodies and #8216 ExoCage.FitsTRX-4

This is the Hot Racing Traxxas X-Maxx Aluminum Front/Rear Anti-Sway Bar Kit (also known as anti-roll bar, sway-bar, or sway bar). This can only be used with Hot Racing XMX55X01 suspension arms.FEATURES:- Designed for quick response, this system keeps...

This is the Hot Racing Red Aluminum Steering Arm Post for Traxxas 1/16 E-Revo, Slash, Summit, and Rally vehicles. This will fit brushed and VXL brushless versions of these 1/16 cars and trucks. This is a direct replacement for Traxxas part 7043...

This is the Hot Racing Silver Aluminum Rear Skid Plate for the Traxxas Slash 2WD trucks. This works on XL-5 brushed and VXL brushless trucks.FEATURES:Made of silver machined 3mm thick 6061-T6 aluminum.The mounting holes are pre-drilled and are...

This is the Hot Racing Blue Aluminum Adjustable 5mm Bearing Stinger Drive for Traxxas Spartan and Spartan SR boats.FEATURES:- CNC machined billet aluminum construction- Allows fully adjustable prop angle of attack for optimization of acceleration, speed,...

This is the Hot Racing Black 6061-T6 Aluminum Rear Shock Tower for Slash 4x4, Stampede 4x4 XL-5, and Stampede 4x4 VXL trucks. Replaces: Stock TRA6839 front shock towerFEATURES:6061-T6 Aluminum constructionBlack anodized colorMuch stronger than stock...

This is the Hot Racing Black 6061-T6 Aluminum Front Shock Tower for the Slash 4x4, Stampede 4x4 XL-5, and Stampede 4x4 VXL trucks. Replaces: Stock TRA6839 front shock towerFEATURES:6061-T6 Aluminum CNC construction.Black anodizedMuch stronger than stock...

These are Traxxas 12x18x4mm Black Rubber Sealed Ball Bearings (2). Each package contains two bearings. Includes: a Pair of 12x18x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for...

This is the Traxxas X-Maxx 8S Dual Cooling Fan Kit for Velineon 1200XL Motor. This is for the 1200XL motor only. Replacement dual cooling fans and shroud fit over the 3362 aluminum heat sink for Velineon 1200XL and 1600XL motors. Replacement Part...

This is the RC4WD 1/10 Scale KC HiLiTES High Performance 100mm / 4" LED Light Bar. These have been Officially Licensed by the KC HiLiTES Company. This will make any scale project look better and add much needed lighting. Detail like no other lights out...

This is the Traxxas Aton Motor LED Lens (Red) - Left & Right. This is Traxxas part number 7961Part Number: 7961 / TRA7961FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have any...

This is the Traxxas Aton Rear Left & Right LED Lens (Red). This is Traxxas part number 7956Part Number: 7956 / TRA7956FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have any...

This is the Traxxas Aton 2.6x5mm Button-Head Machine Screws (Hex Drive) (6). This is Traxxas part number 7944Part Number: 7944 / TRA7944FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us...

This is the Traxxas X-Maxx Rear Shock Tower. This includes both the left and right halves.FeaturesTwo-piece molded composite plastic construction, dark gray in colorIncludes: Left and Right Rear Shock Tower Halves

This is the Traxxas Driveshaft, steel constant-velocity, 1/16 E-Revo (shaft only, 68mm)/ drive cup pin (1). This is Traxxas part number 7153Part Number: 7153 / TRA7153Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Grave DiggerMore detail coming...

This is the Traxxas Linkage, steering (3x20mm turnbuckle) (1)/ rod ends (2)/ hollow balls (2). This is Traxxas part number 6846Part Number: 6846 / TRA6846FitsSlash 2WD VXLSlash 2WD VXL (low CG)Slash 4x4 (low-CG)Slash 4x4 (standard chassis)Slash 4x4...

These Traxxas (225mm) Battery StrapsIncludes: 4 battery strapsSpecificationsLength: 9" (228mm)Width: .62" (16mm)Replacement Part ForDCB M41 WidebodyDisruptorSpartan

This is the Traxxas Finned Aluminum Motor Mount for 1/10 E-Revo and Summit trucks.SpecificationsLength: 58.2mm (2.29")Width: 41mm (1.61")Height: 22.8mm (0.90")Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Summit

This is the Traxxas Transmission Input Slipper Shaft for the Revo 3.3, T-Maxx 3.3, and Slayer trucks.FitsRevo 3.3SlayerSlayer ProT-Maxx 2.5RT-Maxx 3.3

These are the Traxxas 3x10mm Roundhead Self-Tapping Screws. Each package includes six screws.Fits1/10 Monster Jam TrucksBandit XL-5CraniacNitro SlashSkullyStampede XL-5 2WD

These are the Traxxas 4x22mm Button-Head Hex Drive Machine Screws (6). 3x10 mm cap-head machine screws with hex drive heads. Set of six.Includes: Six 4x22mm Button Head Machine Screws Replacement part for these models4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL...

This is the Robinson Racing Extra Hard 17-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...

This is the RPM Blue Nerf Bar Set for 1/10 Rally & Slash 4x4 Ultimate and Low-CG Chassis Trucks. This will only fit vehicles running the low-CG chassis.RPM LCG Nerf Bars have added structural support to help strengthen the body and reduce impact forces...

This is a pair of Traxxas GTR Shock Springs (Long .767 Black) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks. Shock springs for 1/10 scale long GTR shocks use high-quality spring steel with a durable white powder-coated finish. GTR springs...

This is the RC4WD Warn 9.5cti Winch for 1/10 Scale Rock Crawlers and Trail Trucks. Warn is one of the most iconic names in off-road. This winch offers ultra scale looks, and superior quality and craftsmanship. It is officially licensed by Warn...

This is the Traxxas Telemetry Trigger Magnet for the Traxxas TQi Telemetry System. Replacement 5x2 mm telemetry trigger magnet.IncludesOne Telemetry Trigger Magnet for the Traxxas TQi Telemetry SystemSpecifications5mm x 2mm round magnet Replacement Part...

These are the Differential and Transmission Yokes for use on the Traxxas 1/16 E-Revo, Slash, and Summit vehicles.FEATURESNylon constructionBlack in colorINCLUDESTwo YokesTwo 3x10mm Screw PinsREQUIRESInstallation on the vehicle

These are the Integy 12mm Silver Aluminum Wheel Hubs for the Traxxas Stampede, Rustler and Slash FEATURES Silver anodized aluminum INCLUDESFour Aluminum Hex Wheel Hubs REQUIRESAssembly onto the truck SPECSInner Diameter: 0.19"  (5mm)