These are the Traxxas Black Front Springs (2) for Long Ultra Shocks found on vehicles like the Stampede, Craniac, Skully, Bigfoot, and other trucks based on the Stampede chassis.Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaHoss 4X4...

This is the Traxxas TRX-4 LED Headlight and Taillight Kit. This light set must be used with the Traxxas #8028 Power Supply. Whether you're using your trail rig at night, or just looking to have the most realistic scaler possible, these lights are a...

This is the Traxxas 4-Tec 2.0 Ford GT LED Tail Light Kit (fits #8311 series bodies). Use this kit to light up your Traxxas Ford GT taillights and take its realism to the next level!Fits4-Tec 2.0 Ford GT body

This is the Integy Red Aluminum Gear Box Housing for the Traxxas Stampede 2WD, Rustler, Slash 2WD and Bandit. This will fit XL-5 versions.Note: Not compatible with Traxxas wheelie bar or motor guard assemblyFEATURES Red in Color Made of Aluminum Very...

These are the RPM Traxxas Nitro Slash Black Rear Suspension A-Arms. These replace stock part TRA2555, and weigh almost 20% less than the stock arms! These replacement arms are designed specifically for the Nitro Slash.Stock Traxxas rear A-arms for the...

This is the Traxxas 4-Tec 2.0 Rear Differential Housing. This diff housing fits all 4-Tec 2.0 cars, including the Ford GT and Mustang GT.Stock Replacement On4-Tec 2.0 VXL Chassis4-Tec 2.0 XL-5 Chassis4-Tec 2.0 Ford GT4-Tec 2.0 Ford Mustang

This is the Traxxas 4-Tec 2.0 Steering Block Set. These are used on both the Ford GT and Mustang GT version.Fits4-Tec 2.0

This is the Traxxas 4-Tec 2.0 Front and Rear Body Mounts, Posts, and Mount Sliders. These can be used with the Ford GT and Mustang GT versions of the 4-Tec 2.0, as well us for mounting other aftermarket bodies.Fits4-Tec 2.0

This is a set of two Traxxas TRX-4 Crawler Red Fuel Canisters and a mounting Screw Pin.FitsTRX-4

These are the Hot Racing Blue Aluminum 12mm Clamping Wheel Hexes for the front and rear of Traxxas Slash 2WD, Stampede 2WD, and Rustler trucks. These will fit XL-5 brushed and VXL brushless versions.FEATURES:- CNC machined aluminum, anodized blue-...

This is the Hot Racing Aluminum Center Differential Case for Slash 4x4, Stampede 4x4, 1/10 Rally VXL, and Telluride.FEATURES:- CNC 6061-T6 aluminum construction, hard anodized- Direct fit hop up requires no model modification for useINCLUDES:- One (1)...

This is the Hot Racing 32-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision Gears with Standard 4140 steelReduce internal rotating mass...

This is the Traxxas Stainless Steel Hardware Kit for Spartan and DCB M41 boats. This includes all stainless hardware for these boats. The stainless hardware kit contains all the stainless hardware used on Spartan and DCB M41 boats.FitsDCB M41...

This is a pair of Traxxas X-Maxx Titanium-Nitride Coated GTX Shock Shafts, fully-assembled with rod ends and steel hollow balls. Pair of 110 mm titanium-nitride coated long GTX shock shafts. TiN coating resists scuffing, increases durability, and...

This is the Traxxas Aton Rotor Blade Set (2) (Blue) w/Screws. This is Traxxas part number 7929Part Number: 7929 / TRA7929FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have any...

This is the Traxxas X-Maxx Replacement Center Skidplate.FeaturesMolded composite plastic constructionReduces damage to underside of chassis and other components during chassis bottomingIncludes: Center Skidplate

These are the Traxxas X-Maxx and XRT Steel Upper and Lower Bulkhead Tie Bars. Steel upper bulkhead tie bar and lower bulkhead tie bars (2)Features Steel construction Mounts upper and lower bulkhead halves in place IncludesOne Upper and two Lower...

This is the Traxxas X-Maxx Sealed Receiver Box and Wire Cover with Accessories.FeaturesMolded composite plastic receiver box with rubber plugFastens to chassis to hold receiver in placeIncludesReceiver BoxFour 3x15mm Cap ScrewsGasketTube of Silicone...

This is the Traxxas Tires & wheels, assembled, glued (Teton 5-spoke wheels, Teton tires) (2). Give your LaTrax Teton a new set of treads. These rugged off-road tires come pre-mounted to black 5-spoke wheels so they're ready to install right out of...

This is the Traxxas Wheel hubs, hex (4).  Set of four 12 mm hex wheel hubs Replacement Part For1/18 LaTrax Desert Prerunner1/18 LaTrax Teton

This is the Traxxas Shocks, GTR hard-anodized, PTFE-coated aluminum bodies with TiN shafts (fully assembled w/ springs) Take your model to the next level with big suspension technology. New aluminum shocks provide rock-solid durability and long lasting...

This is the Traxxas Driveshaft, center (long), aluminum/ pin. This is Traxxas part number 7655Part Number: 7655 / TRA7655FitsLaTrax SSTMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have any...

This is the Traxxas Spur gear, 60-tooth.60-Tooth spur gear. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your...

This is the Traxxas Gear, 14-T pinion / set screw. 14-tooth pinion gear. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions...

This is full set of four Traxxas 1/16 GTR Hard-Anodized Aluminum Adjustable Shocks with TiN Shafts and PTFE-coated Bodies.  Shock oil is included.  These are the ultimate shock upgrade for 1/16 E-Revo, 1/16 Summit, and 1/16 Slash 4x4 trucks...

This is the Traxxas Input shaft (cush drive)/ pin. This is Traxxas part number 6466Part Number: 6466 / TRA6466FitsXO-1More detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have any questions.

This is the Traxxas XO-1 Tall Battery Hold-Down Retainers. This is Traxxas part number 6427XPart Number: 6427X / TRA6427XFitsFunny CarXO-1More detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have any...

This is the Traxxas XO-1 Tall Battery Hold-Down. This is Traxxas part number 6426XPart Number: 6426X / TRA6426XFitsXO-1More detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have any questions.

This is the Traxxas Body mount posts (2)/ body post pivot (2)/ screw pins, 2.5x18mm (2). This is Traxxas part number 6416Part Number: 6416 / TRA6416Fits1/10 RallyXO-1More detail coming soon! Please check your vehicle manual to confirm vehicle fitment,...

This is the Traxxas BFGoodrich Mud-TerrainT/A KM2 tires with Chrome Green Beadlock Wheels. Pair of BFGoodrich Mud-Terrain T/A KM2 tires come pre-glued and mounted with foam inserts to chrome SCT wheels with green beadlock-style trim. Fits: 12 mm Hex, 2WD...

This is the Traxxas Springs, front (white) (progressive rate) (2). This is Traxxas part number 5857Part Number: 5857 / TRA5857FitsNitro SlashSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD VXL (low CG)Slash 2WD XL-5More detail coming soon! Please...

This is the Traxxas Hold down, battery/ hold down retainer/ battery post/ foam spacer/ angled body clip.Battery hold down and hold down retainer with battery post, foam spacer, and angled body clip Replacement Part ForDrag Slash 1967 Chevrolet C10...

This is the Traxxas Nerf bars, chassis (black). This is Traxxas part number 5823Part Number: 5823 / TRA5823FitsSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD XL-5More detail coming soon! Please check your vehicle manual to confirm vehicle fitment,...

This is a set of four Traxxas Red Body Clip Retainers. These body pin retainers are perfect for keeping your clips from going missing when prepping your boat at the lake.FitsDCB M41Spartan

This is set of Traxxas 5525R Heavy Duty Rod Ends (8). These are used in many Traxxas vehicles, including the Stampede 2WD, Rustler, Bandit, Slayer, Jato and 1/16 Summit.Includes:8 rod endsSpecificationsLength: 31.5mm (1.24")Width at ball joint: 11mm (0...

This is the Traxxas Blue Aluminum GTR Shock Set for Jato, Revo, E-Revo, Summit, Slayer, and XO-1 vehicles. Shock oil is included. Springs are sold separately.Features Machined threaded aluminum body with oversized spring collar for ...

This is the Traxxas 20-Tooth Idler Gear and Shaft for the E-Maxx, E-Maxx Brushless, 1/10 E-Revo, 1/10 E-Revo Brushless, and 1/10 Summit trucks.IncludesOne 20 Tooth Idler GearOne 5x18mm Idler Gear ShaftSpecificationsOutside Diameter: .86" (22mm)Inside...

This is the Traxxas Black Rear Springs for use on the XX-Long Ultra Shocks used on vehicles like the Slash 2WD, Rustler, Stampede 2WD, Stampede 4x4, and others.Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150 RaptorHoss 4X4 VXLNitro...

This is the Traxxas Green Wheelie Bar Mount with Hardware for Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles.IncludesOne wheelie bar mountHardwareInstructions Fits1/10 Monster Jam TrucksBandit VXLBandit XL-5CraniacRustler VXLRustler...

This is a set of Traxxas 3x15mm Flat-Head Hex Drive Machine Screws. Each package includes six screws.Includes: Six 3 x 15mm Flathead Hex Machine Screws Replacement Part ForBandit VXLDrag SlashFord F-150 RaptorFord Fiesta ST RallyHoss 4X4 VXLMaxxRustler...