This is the Traxxas 4-Tec 2.0 Ford GT Blue Pre-Painted Body with Decals. This body is even pre-cut, making for quick final installation!Note: Tail lights, exhaust tips, & mounting hardware (Traxxas part #8314) are not includedFits4-Tec 2.0

These are the RPM Red Rear Suspension A-Arms for Traxxas Slash 2WD XL-5 and VXL electric trucks.RPM rear A-arms for the Traxxas Slash are designed specifically for the Slash 2wd - They are not multi-platform A-arms like the stock versions.Our first...

These are the RPM Traxxas Slash 2WD Black LCG Nerf Bars for use on Slash 2WD trucks running the low-CG chassis. The chassis layout of the low center of gravity chassis (LCG) Slash 2wd is different than the original high center of gravity chassis (HCG),...

This is the Traxxas 4-Tec 2.0 Rear Bumper and Rear Body Mount Set. This is used on both the Ford GT and Mustang GT versions.Fits4-Tec 2.0

This is the Traxxas 4-Tec 2.0 Front Upper and Lower Bumper Set. This is used in both the Ford GT and Mustang GT version.Fits4-Tec 2.0

This is the Traxxas 4-Tec 2.0 Sealed Receiver Box, Cover, Servo Mount and Hardware. This fits both Ford GT and Mustang GT versions.IncludesSealed receiver boxSteering servo mountReceiver coverAccess plugFoam padsSilicone grease2.5x10 Cap Screws...

This is the Traxxas 4-Tec 2.0 Front and Rear Body Mount Set, for use with #8311 series Ford GT bodies.Fits4-Tec 2.0

These are the Traxxas TRX-4 Crawler Left and Right Front Inner Portal Drive Housings and 2.5x4mm Screws (6).FitsTRX-4

This is the Hot Racing Aluminum Hard Anodized Black GTR Shock Bodies for Traxxas 1/16th scale vehicles, including the 1/16 E-Revo, 1/16 Slash 4X4, 1/16 Summit, 1/16 Rally, 1/16 Ford Fiesta, 1/16 Grave Digger, and 1/16 Mustang. These will also work with...

This is the Hot Racing Aluminum 6mm Offset 17mm Hex Hubs for the Traxxas 1/10 Rally VXL, Slash 4X4, Stampede 4x4, and Telluride 4X4 vehicles. Offset from stock wheel hex is +12mm per side.FEATURES:- Black anodized CNC machined aluminum hex adapter- Blue...

This is a pair of Traxxas X-Maxx GTX Assembled 110mm Steel Shock Shafts with rod ends and hollow balls.FeaturesSteel construction with chrome finishComposite plastic rod ends and pressed-in ball linksIncludes2 Shock Shafts with Rod Ends...

This is the Traxxas Caps and spring retainers, GTR long/xx-long shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2)). Replacement GTR shock retainer Includes: upper and lower spring retainers (2), upper caps...

This is the Traxxas Primary Shaft, 1st Speed Hub, and One-Way Bearing for Revo 3.3, Slayer, and T-Maxx 3.3 trucks.IncludesOne Primary ShaftOne One-Way BearingOne Snap RingOne spacerFitsRevo 3.3SlayerSlayer ProT-Maxx 2.5RT-Maxx 3.3

This is the Traxxas Black Chrome Front and Rear Bumper Set for the Revo 3.3, 1/10 E-Revo, and 1/10 E-Revo Brushless Trucks.Fits1/10 E-Revo Brushed1/10 E-Revo BrushlessRevo 3.3

This is the Traxxas Waterproof Sealed Receiver Box with Hardware for vehicles like the E-Maxx Brushless, Slash 4x4, and Blast boats.FitsBlastE-MaxxE-Maxx BrushlessSlash 4x4Slash 4x4 PlatinumSlash 4x4 Ultimate

These are the Traxxas 3x23mm Roundhead Machine Screws. Each package includes six screws.Fits1/10 Monster Jam TrucksBandit XL-5CraniacSkullyStampede XL-5 2WD

These are the Traxxas 3x6mm Roundhead Machine Screws. Each package includes six screws.Fits:1/10 Monster Jam TrucksBandit XL-5CraniacNitro SlashNitro VeeSkullyStampede XL-5 2WD

This is a pair of Traxxas Tracer 2.2" Chrome Rear Wheels for the Traxxas Bandit XL-5 and VXL buggies. These wheels have a slot in the hub to slide over the axle pin.FEATURES:Chrome 5-spoke designFits standard 2.2" truck tiresINCLUDES: Two rear 2.2"...

This is a pair of Traxxas Bandit 30-degree Caster Blocks. These will fit the Bandit XL-5 and VXL buggies.

This is a Traxxas Hard Chrome Suspension Pin Set with E-clips. These are used on the Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede trucks.Includes:2 - 24X3mm pins4 - 31.5X3mm pins2 - 40X3mm pins2 - 48X3mm pins10 - 3mm e-clips

This is the E-Flite 150mAh 1-Cell 3.7V 45C Li-Po Battery. This is perfect for applications requiring a high-C rated battery, such as the Blade Nano QX FPV quadcopters. Specifications Type: LiPoCapacity: 150mAhVoltage: 3.7VConfiguration: 1SLength: 1.47 in...

This is the Traxxas E-Maxx Gear Cover for Single Motor Installation. This works on the E-Maxx 16.8V and E-Maxx Brushless when running a single motor and the 3997X single motor plate.

These are the RPM Adjustable Front Body Mounts for Traxxas Slash 2WD, Nitro Slash, Rustler XL-5 & VXL, and Nitro Rustler vehicles. See Tech Notes at bottom for adjustability info on Rustler vehicles.Immediately after releasing our Adjustable Body...

This is the RPM Blue Motor Protector for the Traxxas Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles. This is designed to be used in place of the bumper or wheelie bar. See Tech Notes at bottom for more information.Many Traxxas electric vehicles...

These are the RPM Blue Short Rod Ends (12) for 1/10 Traxxas vehicles. These replace Traxxas part TRA5347. RPM Rod Ends cover a wide range of currently available Traxxas vehicles including all versions of the following: Slash 2wd, Slash 4x4, Summit,...

This is the RPM Chrome Front Bumper and Skid Plate Set for the Traxxas Slash 4x4 Short Course Trucks.When Traxxas first announced the 4x4 version of the Slash, RPM customers immediately started asking us if our 2wd version parts would fit it. Sadly, that...

This the LaTrax Alias Quadcopter Green Rotor Blade Set. It includes two rotor blades and two screws. Features: Plastic construction Flexible to withstand crashes Includes: Two Rotor Blades Two 1.6x5mm Button Head Cap Screws

This is the Traxxas Auto-Detectable Smart Voltage Sensor.  The auto-detectable voltage sensor plugs into the optional TQi Telemetry Expander to provide real-time voltage data while you drive. Real-time telemetry requires a TQi radio with Traxxas...

This is a set of Traxxas Rear Differential Housings for the Slash 4x4, Stampede 4x4, 1/10 Rally, Telluride, and the XO-1 carsIncludes: Two rear differential housing halves  

This is a pair of Traxxas Drive Yokes for the Revo, T-Maxx 3.3, E-Maxx 3905 and others. These yokes attach to the half shaft assemblies. Features: Black plastic construction Includes:Two yokesTwo drive pins

These are 3x5mm Backplate screws for the Traxxas 2.5, 2.5R, and 3.3 engines. 3x6 mm cap-head machine screws with hex drive heads. Features: Black steel construction Includes: Six black steel cap head screws Specifications:Length: 5mmDiameter:...

This is a Package of 100 Large 1 1/2" Long T Pins from DuBro.  These are great for building airplane kits. FEATURES These nickel plated steel T Pins are a must for all model building! Strong, smooth and sharp. They hold parts in place while...

This is the Traxxas Half Shaft Set: T-Maxx 3.3, Revo & E-Maxx. Overview Half shaft set: left or right (plastic parts only) (internal splined half shaft, external splined half shaft, rubber boot) (assembled with glued boot) (2 assemblies)

This is the RPM Front Shock Tower, Black: Traxxas E-Stampede, E-Rustler, Bandit & Nitro Stampede Overview RPM shock towers for Traxxas 1/10th scale trucks are designed to add strength and support to the front-end suspension components of these great...

This is the RPM 3-Piece Skid Plate Set (Black) for the Traxxas T-Maxx 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucks. This includes a front, center, and rear skid plate. Overview The extended chassis rails of the newer versions of both the T-Maxx and...

This is a set of Integy Titanium Turnbuckles for the Traxxas 1/10 Rustler and Slash XL-5 and VXL trucks. These feature silver rod ends. FEATURES Titanium Construction Silver in Color Assembled w/Rod Ends INCLUDESTwo 90mm turnbucklesFour 80mm...

This is the Resonator Tuned Pipe for the Traxxas Maxx Series Trucks With TRX Racing Engines. FEATURES:Resonator aluminum tuned pipe is specifically engineered to boost performanceThe dual-chamber provides an average peak torque increase of 16% resulting...

This is the EZ Start 2(R) Starting System from Traxxas. This is the updated replacement for the first-generation EZ Start 2 System. It features a higher torque motor for the new 3.3 race series engines. FEATURES:Simple push-button starting for glow plug...

This is the Traxxas TRX 3.3 Engine Piston and Sleeve for the Traxxas TRX 3.3 engines.  This fits the 3.3 engines used in the Traxxas Revo, T-Maxx, Jato, and Nitro 4-Tec vehicles.  A new pistion and sleeve can restore lost power from wear on...

This is the Team Integy MSR6 Blue Aluminum Piggyback Shocks with Aluminum Shock Mounts for the Traxxas Revo 2.5 and 3.3 trucks. These look awesome. The included shock mounts are much stronger than the stock plastic parts. These are a must on show...