This is an optional Wheelie Bar Mount for the Traxxas Electric Stampede, Rustler and Bandit. FEATURES:Constructed of hardened plastic, black in colorInstalls at rear of chassis to hold wheelie bar arm and wheels in place INCLUDES:Assembled optional...

This is Traxxas Rod Ends Short Hollow Balls Set of six short rod ends with hollow ball connectors Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaChevrolet Corvette StingrayDrag...

This is a package of Aluminum Pushrod Spacers for the Traxxas Revo. These are installed on the Progessive suspension system. FEATURES:Red anodized aluminum construction INCLUDES:Eight 4x6x3mm spacers REQUIRES:Nothing.  These are direct fit parts.

This is a Traxxas Jato 2.5 and 3.3 Shim Set.  This includes four silver metal hollow balls and four 3mm silver washers.  These are for adjusting the roll center of the truck.

This is the Traxxas Polished Aluminum Resonator Dyno-Tuned Performance Pipe for the Revo 2.5 and 3.3 monster trucks.  This gives the Revo nearly 20% more power on the bottom-end, where it is needed most when accelerating hard.  This...

This is the Traxxas Center Differential Kit for the Revo 3.3. This also includes the forward-only conversion kit as part of the setup.Features Direct drop-in for the Revo 3.3, standard chassis Revos require the Accessory Rear Output Shaft...

This is a Traxxas T-Maxx Slide Carb Linkage Set, including the throttle link, brake link, and hardware. This works on T-Maxx 2.5 and 3.3 trucks with a slide carb.IncludesOne long linkage wire (160mm)One medium linkage wire (100mm)One short linkage wire...

This is a pair of Traxxas Jato 2.5 and 3.3 Throttle Return Springs.  You don't want to run a truck without this on it.

This is an Integy 1.5mm Replacement Tip for the Team Integy Ti-Nitride Hex Wrench Set.  This is an inexpensive way to get your tools back in perfect condition again. FEATURES Hex wrench tips have a high degree of tolerance to lock screws...

This is replacement Traxxas Fuel Tank Pull Ring, Cap, and Shutoff Clamp for the Revo 2.5 and 3.3 trucks.   Fuel tank cap Kit with pull ring, tank cap, and engine shut-off clamp

This is a Traxxas Heavy Duty Servo Saver Spring for the Revo 2.5 and 3.3.  This servo saver spring should be used when using metal geared servos.

This is a Traxxas Revo Transmission Skid Plate and Roll Hoop Set for the Traxxas Revo 2.5 and 3.3 trucks.  If you crack or break these, you should always fix them.  Without fixing them, you can have big expenses down the road.

This is the Traxxas Complete Stock Replacement Carburetor for the Traxxas TRX 2.5 and TRX 3.3 Engines.  A damaged carburetor will severely decrease the power of your engine.  This can restore the lost power.  The...

This is a Traxxas Lower Chassis Brace Set for the Traxxas T-Maxx .15, 2.5, S-Maxx, Stadium Maxx, and E-Maxx (model 3906).  These are stock replacements. FEATURES:Replaces damaged chassis braces.Constructed of black plastic...

This is an RPM Black Rear Upper and Lower Suspension A-Arm Set for the Traxxas Revo 2.5 and 3.3 trucks.  This includes one rear upper and one rear lower arm.  These will work on either side of the truck.  If you would like to upgrade both...

This is an Integy Red Aluminum Rear Skid Plate for the Traxxas T-Maxx .15, 2.5, 3.3, E-Maxx, and all other Maxx series trucks.  It will fit all versions of the T-Maxx and E-Maxx.  As you can see in the picture,...

This is the GPM Stainless Steel Skid Kit Center Chassis Guard Center skid is a precision formed stainless steel plate designed to reinforce the Traxxas Mini Maxx chassis. At 2mm thickness the integrated guard improves impact resistance and reduces the...

This is the GPM Stainless Steel Side Chassis Skid Plate 2mm Stainless Steel side chassis skid plate is produced to strengthen the lower edge of the Traxxas Mini Maxx chassis. The plate delivers consistent impact and deformation resistance while limiting...

This is the GPM Mini Slash 4140 Carbon Steel Front Driveshafts And Drive Cups 4140 carbon steel with hardening black treatment making it stronger than the original CVD Driveshafts and offers wear-resistance and better transmission. CVD designed for...

This is the GPM Mini Slash 4140 Carbon Steel Rear Driveshafts And Drive Cups 4140 carbon steel with hardening black treatment making it stronger than the original CVD Driveshafts and offers wear-resistance and better transmission. CVD designed for larger...

This is the Traxxas Front and Rear Skid Plates / Bumpers Replacement front and rear skid plates Replacement Part ForMini MaxxMini XRT

This is the RPM Front and Rear Skid Plates For The Traxxas Mini Maxx and Mini XRT RPM Skid Plates for the Traxxas Mini Maxx and Mini XRT solve a major weak point in the stock design. The mounting screws are exposed to damage. When stock screws get...

This is the Viper Scale Racing Life Like Low Rider Hard Body Clip V1/V3, SG+ This new Low Rider clips lowers the ride height of your favorite LL body by .5 mm One each standard Life Like “Low Rider” hardbody clip. Allows fitting most all Life...

This is the Integy HD Steel 16T Pinion and 35T Spur Gear Set 1.5 MOD HD Steel 16T Pinion and 35T Spur Gear Set 1.5 MOD, specifically crafted for the Traxxas X-Maxx and XRT models. This gear set, is designed to accommodate both 5mm and 8mm motor shafts,...

This is the Traxxas 2085XL Digital High-Torque Metal Gear (Ball Bearing) Waterproof Servo Servo, digital high-torque, metal gear (ball bearing), waterproof/ servo saver spring/ steering link Servo requires Maxx mount found in Maxx and X-Series vehicles...

This is the Viper Scale Racing Life Like Hard Body Clip V1, BSRT, SG+ One each standard Life Like hardbody clip. Allows fitting most all Life Like bodies onto Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

This is the Viper Scale Racing Super G+/SRT/440X2 Rear End Setup .250 NDFR with PST Tires Viper rear end setup for Tomy Super G+/SRT and Tyco 440×2 cars. This setup consist of all high performance Viper parts including, Axle, Crown Gear, T Boss,...

This is the Viper Scale Racing Super G+/SRT/440X2 Rear End Setup .275 NDFR Viper rear end setup for Tomy Super G+/SRT and Tyco 440×2 cars. This setup consist of all high performance Viper parts including, Axle, Crown Gear, T Boss and Narrow Double...

This is the Viper Scale Racing Pro Tune-Up Kit for V1, SG+, SRT Turbo The Viper Pro tune up kit is a great way to keep your cars running at Peak performance. Includes2 Pair STD Pickup Shoes1 Pro Guide Pin3 Pair of .008 Pickup Springs The Pro tune up kit...

This is the Viper Scale Racing Viper Billet Extended Guide Pin Viper Pro CNC machined 1 piece Extended guide pin. This guide pin features a reverse taper pin design that reduces friction in the slot and also allows the car to roll easier from side to...

This is the Traxxas 6061-T6 Aluminum (Red-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish...

This is the Traxxas 6061-T6 Aluminum (Green-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish...

This is the Traxxas 6061-T6 Aluminum (Gray-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish...

This is the Traxxas 6061-T6 Aluminum (Blue-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish...

This is the Traxxas 6061-T6 Aluminum (Orange-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish...

This is the Viper Scale Racing Pro 10 Black Diamond Traction Magnets for AFX Super G+ for HO Slot Car VSR Pro 10 Black Diamond Traction Magnets are the strongest compression molded traction magnets you can get at an affordable price. Pro 10 magnets are...

This is the Viper Scale Racing AFX Super G+ Standard Body Clip for HO Slot Car The standard body clip allows you to use most Tomy Super G+ HO bodies on the Viper chassis, BSRT G chassis. This clip also can be used as a option to the stock Tomy Super G+...

This is the Viper Scale Racing AFX Super SG+ Low Rider HO Slot Car Body Clip The Low rider Body clip allows you to use most Tomy Super G+ HO bodies on the Viper chassis, BSRT G chassis. This clip also can be used as a option to the stock Tomy Super G+ HO...

This is the GPM Medium Carbon Steel Motor Gear (12T) Motor tooth diameter: 5mm, D-shaped motor gear hole, module: 1.5mm, number of teeth: 12T,tooth surface width: 9mm IncludesMotor Gear 12T - 1pc4x5 Screw Shaft - 1pc Accessory Part ForX-MaxxXRT

This is the Pioneer Legends Racers Bare Chassis c/w DPR Door Fitted Replacement chassis platform for Pioneer Legends Racers cars. Pioneer Spare Parts keep your car running at its best IncludesPioneer Legends Racers Bare Chassis with DPR Door and Fixing...