This is the Traxxas Center Differential Kit for the Revo 3.3. This also includes the forward-only conversion kit as part of the setup.Features Direct drop-in for the Revo 3.3, standard chassis Revos require the Accessory Rear Output Shaft...

This is a Traxxas T-Maxx Slide Carb Linkage Set, including the throttle link, brake link, and hardware. This works on T-Maxx 2.5 and 3.3 trucks with a slide carb.IncludesOne long linkage wire (160mm)One medium linkage wire (100mm)One short linkage wire...

This is a pair of Traxxas Jato 2.5 and 3.3 Throttle Return Springs.  You don't want to run a truck without this on it.

This is an Integy 1.5mm Replacement Tip for the Team Integy Ti-Nitride Hex Wrench Set.  This is an inexpensive way to get your tools back in perfect condition again. FEATURES Hex wrench tips have a high degree of tolerance to lock screws...

This is replacement Traxxas Fuel Tank Pull Ring, Cap, and Shutoff Clamp for the Revo 2.5 and 3.3 trucks.   Fuel tank cap Kit with pull ring, tank cap, and engine shut-off clamp

This is a Traxxas Heavy Duty Servo Saver Spring for the Revo 2.5 and 3.3.  This servo saver spring should be used when using metal geared servos.

This is a Traxxas Revo Transmission Skid Plate and Roll Hoop Set for the Traxxas Revo 2.5 and 3.3 trucks.  If you crack or break these, you should always fix them.  Without fixing them, you can have big expenses down the road.

This is the Traxxas Complete Stock Replacement Carburetor for the Traxxas TRX 2.5 and TRX 3.3 Engines.  A damaged carburetor will severely decrease the power of your engine.  This can restore the lost power.  The...

This is a Traxxas Lower Chassis Brace Set for the Traxxas T-Maxx .15, 2.5, S-Maxx, Stadium Maxx, and E-Maxx (model 3906).  These are stock replacements. FEATURES:Replaces damaged chassis braces.Constructed of black plastic...

This is an RPM Black Rear Upper and Lower Suspension A-Arm Set for the Traxxas Revo 2.5 and 3.3 trucks.  This includes one rear upper and one rear lower arm.  These will work on either side of the truck.  If you would like to upgrade both...

This is an Integy Red Aluminum Rear Skid Plate for the Traxxas T-Maxx .15, 2.5, 3.3, E-Maxx, and all other Maxx series trucks.  It will fit all versions of the T-Maxx and E-Maxx.  As you can see in the picture,...

This is the GPM Black Precision Carbon Steel Gear Set The GPM TXM1235TS is specified as a medium carbon steel 12T motor gear and 35T spur intended to improve torque transfer consistency and component longevity in the X-Maxx drivetrain. This upgrade...

This is the Viper Scale Racing Gold Plated Endbell w/ Ball Bearing All new Viper Ball Bearing Gold Plated endbell for V1, Super G+ and BSRT G cars. This endbell comes with a precision Ball bearing installed, High temp Brush arm material, arched contact...

This is the Traxxas 2075 Digital High-Torque Waterproof Servo. This servo puts out 125 oz/in of torque at 6V. This is a stock replacement for many vehicles, and can also be used as an upgrade to the 2056 servo found in some models. - OPEN ITEM This is an...

This is the Traxxas EZ-Peak Plus 4-Amp Auto-iD NiMH/LiPo Charger - DAMAGED/OPEN BOX. The charger box was damaged in transit to us. The charger was removed from the box for inspection and is in like new condition.  Given this we are selling this item...

This is the Viper Scale Racing Aurora G Plus Pro 10 Motor Magnets The Aurora G-Plus Pro 10 Motor Magnets are engineered specifically for the iconic Aurora G-Plus platform, delivering a major boost in torque, braking, and overall motor efficiency. These...

This is the Traxxas TRX-4 Wide Inner Fenders (Front and Rear) Wide inner front and rear fenders for clipless TRX-4 bodies. Includes: Rock light covers (8), Battery plate, and 3x8 screws (4)

This is the Traxxas Orange LED Whip Light w/ Flex-Tech Mount Orange whip light with Flex-Tech spring-loaded mount. Includes: 3x12 screws (2). Fits: Left or Right Side. Sold Individually. Requires: TRA6588X accessory power supply.

This is the Traxxas Green LED Whip Light w/ Flex-Tech Mount Green whip light with Flex-Tech spring-loaded mount. Includes: 3x12 screws (2). Fits: Left or Right Side. Sold Individually. Requires: TRA6588X accessory power supply.

This is the Traxxas Blue LED Whip Light w/ Flex-Tech Mount Blue whip light with Flex-Tech spring-loaded mount. Includes: 3x12 screws (2). Fits: Left or Right Side. Sold Individually. Requires: TRA6588X accessory power supply.

This is the Traxxas Red LED Whip Light w/ Flex-Tech Mount Red whip light with Flex-Tech spring-loaded mount. Includes: 3x12 screws (2). Fits: Left or Right Side. Sold Individually. Requires: TRA6588X accessory power supply.

This is the GPM Stainless Steel Skid Kit Center Chassis Guard Center skid is a precision formed stainless steel plate designed to reinforce the Traxxas Mini Maxx chassis. At 2mm thickness the integrated guard improves impact resistance and reduces the...

This is the GPM Stainless Steel Side Chassis Skid Plate 2mm Stainless Steel side chassis skid plate is produced to strengthen the lower edge of the Traxxas Mini Maxx chassis. The plate delivers consistent impact and deformation resistance while limiting...

This is the GPM Mini Slash 4140 Carbon Steel Front Driveshafts And Drive Cups 4140 carbon steel with hardening black treatment making it stronger than the original CVD Driveshafts and offers wear-resistance and better transmission. CVD designed for...

This is the GPM Mini Slash 4140 Carbon Steel Rear Driveshafts And Drive Cups 4140 carbon steel with hardening black treatment making it stronger than the original CVD Driveshafts and offers wear-resistance and better transmission. CVD designed for larger...

This is the Traxxas Front and Rear Skid Plates / Bumpers Replacement front and rear skid plates Replacement Part ForMini MaxxMini XRT

This is the RPM Front and Rear Skid Plates For The Traxxas Mini Maxx and Mini XRT RPM Skid Plates for the Traxxas Mini Maxx and Mini XRT solve a major weak point in the stock design. The mounting screws are exposed to damage. When stock screws get...

This is the Viper Scale Racing Life Like Low Rider Hard Body Clip V1/V3, SG+ This new Low Rider clips lowers the ride height of your favorite LL body by .5 mm One each standard Life Like “Low Rider” hardbody clip. Allows fitting most all Life...

This is the Integy HD Steel 16T Pinion and 35T Spur Gear Set 1.5 MOD HD Steel 16T Pinion and 35T Spur Gear Set 1.5 MOD, specifically crafted for the Traxxas X-Maxx and XRT models. This gear set, is designed to accommodate both 5mm and 8mm motor shafts,...

This is the Traxxas 2085XL Digital High-Torque Metal Gear (Ball Bearing) Waterproof Servo Servo, digital high-torque, metal gear (ball bearing), waterproof/ servo saver spring/ steering link Servo requires Maxx mount found in Maxx and X-Series vehicles...

This is the Viper Scale Racing Life Like Hard Body Clip V1, BSRT, SG+ One each standard Life Like hardbody clip. Allows fitting most all Life Like bodies onto Tomy Super G Plus, BSRT G3, and Viper V1 without the lexan posts.

This is the Viper Scale Racing Super G+/SRT/440X2 Rear End Setup .250 NDFR with PST Tires Viper rear end setup for Tomy Super G+/SRT and Tyco 440×2 cars. This setup consist of all high performance Viper parts including, Axle, Crown Gear, T Boss,...

This is the Viper Scale Racing Super G+/SRT/440X2 Rear End Setup .275 NDFR Viper rear end setup for Tomy Super G+/SRT and Tyco 440×2 cars. This setup consist of all high performance Viper parts including, Axle, Crown Gear, T Boss and Narrow Double...

This is the Viper Scale Racing Pro Tune-Up Kit for V1, SG+, SRT Turbo The Viper Pro tune up kit is a great way to keep your cars running at Peak performance. Includes2 Pair STD Pickup Shoes1 Pro Guide Pin3 Pair of .008 Pickup Springs The Pro tune up kit...

This is the Viper Scale Racing Viper Billet Extended Guide Pin Viper Pro CNC machined 1 piece Extended guide pin. This guide pin features a reverse taper pin design that reduces friction in the slot and also allows the car to roll easier from side to...

This is the Traxxas 6061-T6 Aluminum (Red-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish...

This is the Traxxas 6061-T6 Aluminum (Green-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish...

This is the Traxxas 6061-T6 Aluminum (Gray-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish...

This is the Traxxas 6061-T6 Aluminum (Blue-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish...

This is the Traxxas 6061-T6 Aluminum (Orange-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish...