These are the Hot Racing Black Aluminum C-Hub Castor Blocks for the 1/10 Traxxas Rally VXL, Slash 4X4, Stampede 4X4, and Telluride 4X4.FEATURES:- CNC machined 6061-T6 aluminum, anodized black- Brass kingpin bushings for smooth steering- Laser etched...

This is the Hot Racing 53-Tooth 0.8 Mod 32-Pitch Spur Gear for 1/10 E-Revo, Jato, T-Maxx 3.3, Slash 4x4, Stampede 4x4, Summit, and 1/10 Rally VXL.FEATURES:- CNC machined and lightened hardened steel construction- Black oxide coating for durability and...

This is the Traxxas X-Maxx Aluminum Center Driveshaft Assembly and steel double-sided gear.Features Aluminum construction with natural silver colored finish Double sided steel gear meshes with transmission output gear IncludesCenter DriveshaftSteel...

This is the Traxxas Suspension arms - Front or Rear (2).Left or right suspension arms fit front or rearReplacement Part For1/18 LaTrax Desert Prerunner1/18 LaTrax Teton

This is the Traxxas Linkage, steering. Steering linkage comes assembled with rod ends and hollow balls Replacement part forFord Fiesta ST RallyHoss 4X4 VXLRustler 4X4 VXLRustler 4X4Slash 4X4 Ultimate

This is the Traxxas Chassis, low CG (black). This is Traxxas part number 5832Part Number: 5832 / TRA5832FitsSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD VXL (low CG)Slash 2WD XL-5More detail coming soon! Please check your vehicle manual to...

This is the Traxxas 43-Tooth 1st Speed Gear for Revo 3.3, Slayer, and T-Maxx 3.3 trucks.Includes: One 43T 1st Speed GearFitsRevo 3.3SlayerSlayer ProT-Maxx 2.5RT-Maxx 3.3

This is the Traxxas Revo and Slayer Receiver and Battery Box with cover, foam pad, adhesive, rubber charge jack plug, 4x8mm screw, and two 4x12mm screws. This set contains both boxes to accommodate either AA battery holder or a 5-cell receiver flat pack...

This is a set of Traxxas TRX 3.3 Cooling Head Gaskets measuring 0.20, 0.30, and 0.40mm. The stock size is 0.30mm. These will give you the ability to tune your engine for optimal performance under your conditions.Fits TRX 3.3 engines in:Nitro 4-TecNitro...

This is a pair of Traxxas 7075-T6 Black Aluminum Front 112mm Toe Link Tubes with Rod Ends and Wrench for the T-Maxx 2.5R, 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucks with the sealed pivot ball suspension. These are 30% lighter than the stock links,...

This is the Traxxas T-Maxx 2.5 and 3.3 Fuel Tank Rebuild Kit with cap, foam washer, o-ring, upper/lower retainers, screw, spring and screw pin.IncludesOne black nylon capOne steel cap springOne 14x25mm black foam washerOne upper black nylon foam washer...

This is a pair of Traxxas Rustler Ribbed Front Tires Pre-Mounted on 2.8" Black Chrome All-Star Wheels. These have a 12mm hex and are designed for the front of the Rustler XL-5 and Rustler VXL trucks.Features2.8" All Star black chrome wheelsRibbed...

This is a pair of Traxxas Green 6061-T6 Aluminum Stub Axle Carriers with Bearings for the Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles.Features6061-T6 aluminum constructionAnodized green in colorIncludesTwo Aluminum Rear Stub AxlesFour 5x11mm...

These are the Traxxas 3x25mm Buttonhead Hex Machine Screws. Each package includes six screws.Replacement part for these modelsE-Revo VXL BrushlessMaxxRevoSlayer Pro 4X4SledgeSummitTRX-4 1972 Chevrolet Blazer High Trail EditionTRX-4 1979 Chevrolet...

These are the Traxxas Alias Ribbed 2.2" Soft-Compound Front Tires with foam inserts for the Traxxas Bandit XL-5 and VXL buggies.FEATURES:Alias ribbed tiresFor use on front of buggySoft compoundINCLUDES: Two Traxxas Alias Ribbed 2.2" tiresREQUIRES:2.2"...

This is a pair of Traxxas Bandit Rear Alias 2.2" Tires Mounted on Tracer Black Chrome Wheels. These are a medium-compound tire with foam inserts, pre-mounted and glued on black chrome wheels.These are a direct fit on the rear of the Bandit XL-5 and...

This is the Racers Edge Glitch Buster Power Capacitor. These can be plugged into any open channel on your receiver to help reduce glitching caused by radio interference on your RC car, truck, or buggy. Compatible with Spektrum, Futaba, Hitec, Traxxas,...

This is the RPM Blue Front Bumper and Skid Plate Set for the Traxxas Slash 2WD and Nitro Slash short course trucks. This setup is almost a full ounce lighter than stock!Our two-piece front bumper for the Traxxas Slash 2WD & Nitro Slash is simple,...

These are the RPM Chrome Mock Through-the-Body Side Exhaust Tips for 1/10 Scale Vehicles. This set comes with two complete tips, one for each side of the vehicle.Details. They're what set a custom ride apart from the common, everyday vehicle. Details are...

This is Tamiya PS-31 Smoke Window Tint Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies. The smoke color is perfect for giving your RC body tinted windows to make your vehicle stand out from the crowd...

This is Tamiya PS-23 Gunmetal Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil...

This is Tamiya PS-16 Metal Blue Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil...

This is Tamiya PS-15 Metal Red Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil...

This is Tamiya PS-12 Silver Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil and...

This is Tamiya PS-10 Purple Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil and...

This is Tamiya PS-8 Light Green Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil...

This is Tamiya PS-7 Orange Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil and...

This is Tamiya PS-6 Yellow Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil and...

This is Tamiya PS-5 Black Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil and...

This is Tamiya PS-4 Blue Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil and...

This is Tamiya PS-2 Red Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil and...

This is Tamiya PS-1 White Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil and...

This is the stock replacement Rear Bulkhead for the Traxxas Slash 4x4. FEATURES Hardened plastic construction Black in color INCLUDESOne rear bulkhead REQUIRES: Installation on Slash REPLACEMENT PART FORFord F-150 Raptor R 4X4Hoss 4X4 VXLSlash 4X4...

This is the Traxxas Replacement Idler Gear and Shaft for the Nitro Stampede/Rustler. This gear is located in the transmission. Features: White nylon construction Steel shaft Includes:One 20 tooth idler gearOne idler gear shaft Specifications:Gear outer...

This is the Traxxas Rear Suspension Arm Set for use on the 1/16 Slash VXL 4WD. Features: Nylon construction Black in color Includes:One Lower Right Suspension ArmOne Lower Left Suspemsion ArmTwo Upper Left/Right Suspension Arms

This is the Traxxas Front Bumper and Mount for the Slash 1/10 2WD Short Course Racing Truck. Features: Nylon construction Black in color Includes: One Front Bumper and bumper mount Requires: Installation on the Traxxas Slash

This is the Header Spring and Gaskets from Traxxas for the TRX 2.5, TRX 2.5R and the TRX 3.3 Engines FEATURES Spring constructed of steel INCLUDESOne header springOne black rubber gasketOne white nylon gasket REQUIRESFastening header to engine...

This is the Traxxas Hardened Steel Front Center Drive Hub and Screw Pin for 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and XO-1 vehicles. The replacement hardened-steel drive hub connects your front differential to the aluminum center driveshaft...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Rear, -10% Rate, Green (2) Pair of XX-long progressive-rate springs are custom-wound to provide responsive control over small bumps, with a progressively stiffer rate to absorb hard landings...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Front, -10% Rate, Green (2). Features Custom wound for Slash 4X4 Progressive-rate design allows small-bump compliance without compromising big-hit capability Durable powdercoated...