This is the GPM Racing Blue Aluminum Rear Shock Mount for Traxxas 1/10 E-Revo 2.0, E-Revo Brushed & Brushless, Revo 3.3, Slayer, and Summit trucks. Made of 6061-T6 aluminum, this mount is super tough and looks stunning with its anodized finish.This...

This is the GPM Racing Black 6061-T6 Aluminum 90T Progressive-2 Rear Rocker Arm Set for Traxxas 1/10 E-Revo, E-Revo 2.0, Summit, Revo 3.3, and Slayer Pro trucks.IncludesRocker Arm-2pcsStainless Steel Round Head Screw 3x14-4pcsLock Nut 3mm-4pcsAlloy...

This is the GPM Racing Green Aluminum Front Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, Bandit, and Nitro Stampede trucks.This is a direct replacement for the stock Traxxas part 3639 shock tower.Accessory Part ForTraxxas 1/10...

These are the GPM Racing Orange Aluminum Rear Stub Axle Carriers for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehicles.This is a direct replacement for Traxxas part 3752 hub carriers.Accessory Part ForTraxxas 1/10 Monster Jam...

This is the Pro-Line Pre-Cut 2019 Chevy Silverado Z71 Body (clear/unpainted) with Decals for the Traxxas X-Maxx trucks.Pro-Line now has the ultimate licensed Chevy body specifically made for the X-MAXX - the 2019 Chevy Silverado Z71 Trail Boss! The just...

This is the Pro-Line 1966 Chevy C-10 Body Cab+Bed for 12.3" Wheelbase Crawlers like the Axial SCX10, Vaterra Ascender, as well as other 12.3" WB trucks. The body is supplied clear/unpainted.Pro-Line has a brand new body for all of the Scale Crawler...

These are the Traxxas E-Revo 2 Front and Rear Body Mounts with Hardware. This includes 3x12mm Capscrews (4), 3x12mm shoulder screws (2), and 3x10mm flat-head machine screws (8).Stock Replacement OnE-Revo 2.0

These are the Traxxas Unlimited Desert Racer Front Toe Links (2) with Hollow Balls.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas Unlimited Desert Racer Lower Left Suspension Arm with Insert and Pre-Installed Hollow Ball.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas Unlimited Desert Racer Rigid Edition Painted Body and Decals. The body is ready for installation, making it perfect to restore that factory finish to your truck!Stock Replacement OnUnlimited Desert Racer (UDR)

This is a pair of Traxxas Red Fire Extinguishers for the Unlimited Desert RacerStock Replacement OnUnlimited Desert Racer (UDR)

These are the Traxxas Red Front Springs (2) for Long Ultra Shocks found on vehicles like the Stampede, Craniac, Skully, Bigfoot, and other trucks based on the Stampede chassis.Accessory Part For1/10 Monster Jam TrucksCraniacSkullyStampede 4x4 VXLStampede...

This is the Traxxas 4-Tec 2.0 Ford Mustang GT Black Pre-Painted Body with Decals. The body comes pre-cut and ready for installation. Traxxas artfully captures the spirit and unmistakable shape of the Ford Mustang GT with this fully licensed replica body...

This is the Traxxas X-Maxx Green Aluminum Motor Mount Washer and Screw Set. This set includes four washers and four screws. Aluminum washers add additional strength and good looks to the motor mounts in the X-Maxx® chassis. Includes 4x18 mm screws...

This is the Traxxas TRX-4 Crawler Complete Front and Rear Body Mount and Post Set.FitsTRX-4

This is a pair of Traxxas TRX-4 GTS Front 0.45 Rate Shock Springs. These have a natural finish.FitsTRX-4

This is the Traxxas TRX-4 ExoCage complete with Assembly Hardware. This fits #8011 series bodies. Requires: #8015 roof basket is sold separately. Replacement Part ForTRX-4 Scale and Trail Crawler Accessory Part ForTRX-4 1979 Chevrolet BlazerTRX-4 1979...

These are the Hot Racing Rear Multi-Rate Springs (3 Pairs) for Slash 2WD, Stampede 2WD, Rustler. These work on the rear of the XL-5 brushed and VXL brushless versions of these trucks.FEATURES:- Spring steel construction- Multi-rate springs allow the...

These are the Hot Racing Black Aluminum C-Hub Castor Blocks for the 1/10 Traxxas Rally VXL, Slash 4X4, Stampede 4X4, and Telluride 4X4.FEATURES:- CNC machined 6061-T6 aluminum, anodized black- Brass kingpin bushings for smooth steering- Laser etched...

This is the Hot Racing 53-Tooth 0.8 Mod 32-Pitch Spur Gear for 1/10 E-Revo, Jato, T-Maxx 3.3, Slash 4x4, Stampede 4x4, Summit, and 1/10 Rally VXL.FEATURES:- CNC machined and lightened hardened steel construction- Black oxide coating for durability and...

This is the Traxxas X-Maxx Aluminum Center Driveshaft Assembly and steel double-sided gear.Features Aluminum construction with natural silver colored finish Double sided steel gear meshes with transmission output gear IncludesCenter DriveshaftSteel...

This is the Traxxas Suspension arms - Front or Rear (2).Left or right suspension arms fit front or rearReplacement Part For1/18 LaTrax Desert Prerunner1/18 LaTrax Teton

This is the Traxxas Linkage, steering. Steering linkage comes assembled with rod ends and hollow balls Replacement part forFord Fiesta ST RallyHoss 4X4 VXLRustler 4X4 VXLRustler 4X4Slash 4X4 Ultimate

This is the Traxxas Chassis, low CG (black). This is Traxxas part number 5832Part Number: 5832 / TRA5832FitsSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD VXL (low CG)Slash 2WD XL-5More detail coming soon! Please check your vehicle manual to...

This is the Traxxas 43-Tooth 1st Speed Gear for Revo 3.3, Slayer, and T-Maxx 3.3 trucks.Includes: One 43T 1st Speed GearFitsRevo 3.3SlayerSlayer ProT-Maxx 2.5RT-Maxx 3.3

This is the Traxxas Revo and Slayer Receiver and Battery Box with cover, foam pad, adhesive, rubber charge jack plug, 4x8mm screw, and two 4x12mm screws. This set contains both boxes to accommodate either AA battery holder or a 5-cell receiver flat pack...

This is a set of Traxxas TRX 3.3 Cooling Head Gaskets measuring 0.20, 0.30, and 0.40mm. The stock size is 0.30mm. These will give you the ability to tune your engine for optimal performance under your conditions.Fits TRX 3.3 engines in:Nitro 4-TecNitro...

This is a pair of Traxxas 7075-T6 Black Aluminum Front 112mm Toe Link Tubes with Rod Ends and Wrench for the T-Maxx 2.5R, 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucks with the sealed pivot ball suspension. These are 30% lighter than the stock links,...

This is the Traxxas T-Maxx 2.5 and 3.3 Fuel Tank Rebuild Kit with cap, foam washer, o-ring, upper/lower retainers, screw, spring and screw pin.IncludesOne black nylon capOne steel cap springOne 14x25mm black foam washerOne upper black nylon foam washer...

This is a pair of Traxxas Rustler Ribbed Front Tires Pre-Mounted on 2.8" Black Chrome All-Star Wheels. These have a 12mm hex and are designed for the front of the Rustler XL-5 and Rustler VXL trucks.Features2.8" All Star black chrome wheelsRibbed...

This is a pair of Traxxas Green 6061-T6 Aluminum Stub Axle Carriers with Bearings for the Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles.Features6061-T6 aluminum constructionAnodized green in colorIncludesTwo Aluminum Rear Stub AxlesFour 5x11mm...

These are the Traxxas 3x25mm Buttonhead Hex Machine Screws. Each package includes six screws.Replacement part for these modelsE-Revo VXL BrushlessMaxxRevoSlayer Pro 4X4SledgeSummitTRX-4 1972 Chevrolet Blazer High Trail EditionTRX-4 1979 Chevrolet...

These are the Traxxas Alias Ribbed 2.2" Soft-Compound Front Tires with foam inserts for the Traxxas Bandit XL-5 and VXL buggies.FEATURES:Alias ribbed tiresFor use on front of buggySoft compoundINCLUDES: Two Traxxas Alias Ribbed 2.2" tiresREQUIRES:2.2"...

This is a pair of Traxxas Bandit Rear Alias 2.2" Tires Mounted on Tracer Black Chrome Wheels. These are a medium-compound tire with foam inserts, pre-mounted and glued on black chrome wheels.These are a direct fit on the rear of the Bandit XL-5 and...

This is the Racers Edge Glitch Buster Power Capacitor. These can be plugged into any open channel on your receiver to help reduce glitching caused by radio interference on your RC car, truck, or buggy. Compatible with Spektrum, Futaba, Hitec, Traxxas,...

This is the RPM Blue Front Bumper and Skid Plate Set for the Traxxas Slash 2WD and Nitro Slash short course trucks. This setup is almost a full ounce lighter than stock!Our two-piece front bumper for the Traxxas Slash 2WD & Nitro Slash is simple,...

These are the RPM Chrome Mock Through-the-Body Side Exhaust Tips for 1/10 Scale Vehicles. This set comes with two complete tips, one for each side of the vehicle.Details. They're what set a custom ride apart from the common, everyday vehicle. Details are...

This is Tamiya PS-31 Smoke Window Tint Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies. The smoke color is perfect for giving your RC body tinted windows to make your vehicle stand out from the crowd...

This is Tamiya PS-23 Gunmetal Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil...

This is Tamiya PS-16 Metal Blue Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil...