These are the Traxxas 4-Tec 2.0 Front Response Tires on Split-Spoke Green Wheels (2). Customize your car with a set of these to make it stand out at the track!Accessory Part For4-Tec 2.0 VXL4-Tec 2.0 XL-54-Tec 2.0 Mustang4-Tec 2.0 Ford GT

These are the Traxxas 4-Tec 2.0 Front Response Tires on Split-Spoke Orange Wheels (2). Customize your car with a set of these to make it stand out at the track!Accessory Part For4-Tec 2.0 VXL4-Tec 2.0 XL-54-Tec 2.0 Mustang4-Tec 2.0 Ford GT

These are the Traxxas 4-Tec 2.0 Steel Front CV-Driveshafts (2). Improve durability and performance of your car with these steel upgrade shafts.Accessory Part For4-Tec 2.0 VXL4-Tec 2.0 XL-54-Tec 2.0 Mustang4-Tec 2.0 Ford GTRequires: TRA8353X drive cups...

These are the Traxxas Green Front Springs (2) for Long Ultra Shocks found on vehicles like the Stampede, Craniac, Skully, Bigfoot, and other trucks based on the Stampede chassis.Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaHoss 4X4...

These are the LaTrax Small Body Clips (12). These work on all LaTrax 1/18 scale cars and trucks.FitsLaTrax Desert PrerunnerLaTrax RallyLaTrax SSTLaTrax Teton

This is the Traxxas Pink Aluminum 30-Degree Caster Block Set for Rustler, Stampede 2WD, Slash 2WD, and Nitro Slash trucks. These will fit XL-5 brushed and VXL brushless versions.Fits1/10 Monster Jam TrucksCraniacNitro SlashRustler VXLRustler...

These are the RPM Replacement Axle Carrier Bearings for use with RPM axle carriers and True-Track kits for Traxxas Revo, E-Revo, T-Maxx and E-Maxx trucks.This bearing kit replaces worn out or damaged bearings from the RPM Axle Carrier set for the Traxxas...

These are the RPM Red Front Suspension A-Arms for Traxxas Slash 2WD, Rustler XL-5 & VXL, Stampede 2WD XL-5 & VXL, and Nitro Slash trucks. The arms work with all variations of the electric Stampede 2WD, including Skully, Craniac, and Bigfoot trucks.RPM...

These are the RPM Black Zoomies Mock Exhaust Headers. What are ''Zoomies'', you might be asking? It's a term dating back to the 1970's that describes 4 upturned exhaust pipes or headers on each side of the car. You may be most familiar with them from...

These are the Traxxas 15x21x4mm Black Rubber Sealed Ball Bearings (2). Each package includes two bearings. These are used in the TRX-4 Crawler.FitsTRX-4

These are the Hot Racing Swaybar-Ready Black Aluminum Lower Suspension Arms for the Traxxas X-Maxx 6S and 8S trucks. These can be used with Hot Racing sway bar kit XMX311X06.FEATURES:CNC T6 6061 Aluminum ConstructionWith Sway Bar Bar Mount for use with...

This is the Hot Racing HD CNC Machined Hard Anodized Aluminum Slipper Plate and Hub for the 1/10 Traxxas Bandit, Jato 3.3, Rally*, Rustler, Slash 2WD, Slash 4X4*, Stampede 2WD, and Stampede 4X4*. This item is a replacement for Traxxas 5556.*For high...

This is the Traxxas Aton Rotor Blade Set (2) (Green) w/Screws. This is Traxxas part number 7931Part Number: 7931 / TRA7931FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have...

This is the Traxxas Differential Carrier with Gaskets. This works on the front or rear of the truck. FeaturesMolded composite plastic constructionIncludesDifferential CarrierTwo X-Ring GasketsTwo Ring Gear Gaskets Replacement part for these...

This is the Traxxas 10-T Pinion Gear with Set Screw 10-tooth pinion gear. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions...

This is the Traxxas Rocker arm set, progressive-2/ plastic bushings (8).Rocker arm set, progressive-2/ 4x7x2.5mm PB (8)Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16...

This is the Traxxas Gear set, center differential (output gears (2)/ spider gears (2)/ spider gear shaft). This is Traxxas part number 6883Part Number: 6883 / TRA6883Fits1/10 RallySlash 4x4 (low-CG)Slash 4x4 (standard chassis)Slash 4x4 PlatinumSlash 4x4...

This is the Traxxas Wheels, SCT Split-Spoke, satin chrome, black beadlock style, dual profile (2.2' outer, 3.0' inner) (4WD front/rear, 2WD rear only) (2). This is Traxxas part number 6872Part Number: 6872 / TRA6872FitsNitro SlashSlash 2WDSlash 2WD Ford...

This is the Traxxas Sensor, temperature and voltage (short). This is Traxxas part number 6523Part Number: 6523 / TRA6523Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16...

This is the Traxxas 1/10 Summit Front and Rear Tall Body Mount Post Set.Fits1/10 Summit

These are the Traxxas Forward and Reverse Primary Gears for Revo 3.3, T-Maxx 3.3 (with reverse), and Slayer trucks.IncludesOne Plastic Forward gearOne Steel Reverse gearOne Steel retaining clipOne copper gear washerOne gear pinOne instruction sheet ...

These are the Traxxas Aluminum Rocker Arm Posts (4) for Revo 3.3, 1/10 E-Revo, and Slayer trucks. Upgrade to these to save weight over the stock steel rocker posts.Includes: Four aluminum rocker arm postsFits1/10 E-Revo Brushed1/10 E-Revo BrushlessRevo...

This is the Traxxas Chrome Rear Bumper and Hardware for the Revo 3.3, 1/10 E-Revo, and 1/10 Summit trucks.IncludesOne rear bumperOne bumper mount(2) 4X10mm button head screws(2) 3X26mm button head screwsFits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10...

This is a pair of Traxxas Talon Tires with Foam Inserts, Pre-Mounted on 3.8" Chrome Wheels with 14mm Hex Hubs. These can be used on 1/10 E-Revos, Revo 3.3, E-Maxx, and T-Maxx trucks using 14mm hexes.Features Plastic chrome 5-split spoke...

This is the Traxxas Front and Rear Splined Center Half Shaft Set with Metal U-Joints for the Traxxas T-Maxx 3.3 trucks.FeaturesConstructed of hardened composite material with steel U-jointsCenter front and center rear driveshaft assembliesIncludesTwo...

This is a package of six Traxxas 4x10mm Button-Head Hex Machine Screws.Replacement part forE-Revo VXL BrushlessFord Fiesta ST RallyHoss 4X4 VXLMaxxRevoRustler 4X4 VXLSlash 4X4 UltimateSlayer Pro 4X4SummitUnlimited Desert Racer

This is the Traxxas Blue Aluminum 39mm Camber Link Turnbuckle assembled with rod ends and hollow balls. Search our store for part 3741A for complete camber link set.Fits:1/10 Monster Jam TrucksBigfootCraniacNitro SlashRustler VXLRustler XL-5SkullySlash...

This is the Traxxas Receiver Box Seal Kit with O-ring, Seals, and Silicone Grease. This is for use on with the 3628 waterproof receiver box. Refresh your 3628 sealed receiver box with this seal kit. Includes new O-ring, foam seal, and silicone grease...

This is the Traxxas Servo Case for 2055 servo. This is Traxxas part number 2052.

This is the Front Bulkhead for the Traxxas Slash 4x4. FEATURES Hardened plastic construction Black in color INCLUDESOne front bulkhead REQUIRESInstallation on chassis Replacement part forHoss 4X4 VXLSlash 4X4 VXLSlash 4X4Stampede 4X4 VXL

These are the Traxxas 2.8" Chrome Rear All-Star Wheels for electric Rustler and Stampede 2WD trucks.Fits1/10 Monster Jam TrucksCraniacMonster JamRustler VXLRustler XL-5SkullySon-Uva-DiggerStampede VXL 2WDStampede XL-5 2WD

These are the RPM Black Revolver 2.2/3.0 Wheels for the front/rear of Traxxas 1/10 Slash 4x4, and rear of Slash 2WD Short Course trucks. These feature splined drives instead of hexes for incredible strength. Spline adapters are included.These could also...

This is the RPM Blue Wide Front Bumper for the Traxxas electric Rustler, electric Stampede 2WD, Bandit, Nitro Rustler, and Nitro Stampede trucks. At over six inches wide, this offers the ultimate in protection for your ride!Give your favorite Traxxas...

These are the RPM Green Front Upper & Lower Suspension A-Arms for Traxxas 1/16 E-Revo and 1/16 Grave Digger trucks.Upon the release of the Traxxas 1/16th Scale Mini E-Revo, RPM immediately started receiving requests for durability upgrades. What...

This is a pair of Traxxas GTR Shock Springs (Long .653 Green) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks. Shock springs for 1/10 scale long GTR shocks use high-quality spring steel with a durable white powder-coated finish. GTR springs...

This is the Traxxas Center Differential Housing for the Slash 4x4 and 1/10 Rally vehicles equipped with a center differential. It's a direct replacement for the Slash 4x4 Platinum, and also works on Slash 4x4 and Rally vehicles running the center diff...

This is the Traxxas Complete Differential Assembly for the 1/16 scale E-Revo, Summit, Slash, Rally, and other Traxxas 1/16 vehicles.Includes: One complete differential assembly

This is a set of Traxxas Body Mounts for the Front or Rear of the Slash 4x4 or Stampede 4x4 Truck. Body mount includes body mount posts (2) and body post extensions (2). Fits: Front or Rear. Replacement Part ForSlash 4X4 UltimateSlash 4X4 VXLSlash...

This is a replacement Black Wing with Decals for the Traxxas 1/16 E-Revo VXL Truck.FeaturesNylon constructionBlack in colorIncludes:One WingOne Decal SetSpecificationsLength: 118mm (4.6")Width: 43mm (1...

This is the Team Integy Super Brushless Motor Heatsink with cooling fan for use on the Traxxas 1/16 E-Revo and Slash VXL. This heatsink snaps onto the motor can.FEATURESAluminum construction silver...