These are the Traxxas X-Maxx Steering Bellcranks and Servo Saver.FeaturesMolded composite plastic constructionSteel servo saver springIncludesTwo Steering BellcranksBellcrank SupportServo Saver ...

This is the Traxxas X-Maxx Front and Rear Skidplate Set with Rubber Impact Cushions.FeaturesMolded composite plastic constructionReduces damage to underside of chassis and other components during chassis bottomingIncludesFront skid...

This is the Traxxas Stub axles, front, heavy duty (2)/ yokes (2)/ pins (4). This is Traxxas part number 6854XPart Number: 6854X / TRA6854XFits1/10 RallySlash 4x4 (low-CG)Slash 4x4 (standard chassis)Slash 4x4 PlatinumSlash 4x4 UltimateStampede 4x4...

This is the Traxxas Tires & wheels, assembled, glued (split-spoke, black chrome wheels, slick tires (S1 compound), foam inserts) (rear) (2). This is Traxxas part number 6477 Specially developed for high-speeds these belted rear slick tires resist...

This is the Traxxas Differential Housing and Pinion Collar Set for the E-Maxx, E-Maxx Brushless, and T-Maxx 3.3 trucks.Includes: Left and Right Differential Housings and Pinion Collar FitsE-MaxxE-Maxx BrushlessT-Maxx 3.3

These are the Traxxas 3x20mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used in many different Traxxas vehicles.Replacement part forBandit VXLDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150...

This is a set of six LaTrax 1.6x5mm Self-Tapping Screws for use on the LaTrax Alias Quadcopter.Includes: Six 1.6x5mm self-tapping screws

This is a pair of RPM Black Rear Revolver 2.2" Wheels for the Traxxas Electric Rustler and Electric Stampede.Pull the trigger on the competition when you equip your ride with some loaded Revolvers from RPM! The Revolvers for 1/10th scale trucks are...

This is the RPM Blue Axle Carriers for the Traxxas 1/16 E-Revo, 1/16 Slash, and 1/16 Summit. This fits brushed and VXL brushless versions.There is very little that can be as frustrating on an R/C vehicle as slop in the suspension system. In the case of...

This is the replacement Traxxas 2.4GHz TQ Link Transmitter Antenna. Replacement antenna for early TQ 2.4 GHz transmitters

This is the Integy Orange Aluminum Evolution Suspension Conversion Kit for the Traxxas Rustler XL-5 and VXL trucks. Features: Aluminum construction Orange in color Includes: Shock towers-front and rear Four hex wheel hubs with...

This is the Integy Aluminum Front Shock Tower (Blue) for the Traxxas Rustler and Slash XL-5 and VXL vehicles. FEATURES Aluminum construction Anodized blue in color INCLUDESOne blue front shock towerInstallation hardware REQUIRESInstallation on the...

These are Traxxas Wheel Hub Ball Bearings for the Revo, T-Maxx 3.3, E-Maxx, and other vehicles. Pair of 12x18x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction...

This is the Traxxas Updated Wire Harness for the EZ Start and EZ Start 2 Systems. This harness has the white connector that the EZ Start pack plugs into. Features: Extra long 12" wires Pre-installed connectors and eyelets Includes:One wire harnessOne...

This is a set of optional 30 Degree Red Caster Blocks for the Traxxas Rustler, Stampede, and Slash 2WD FEATURES Anodized aluminum construction Red in color 30 degree INCLUDESOne left and right 30 degree red anodized aluminum caster...

This is the Team Integy Evolution-5 Aluminum Servo Guard (Blue) for use on the Traxxas T-Maxx 3.3 (fits models 4907 and 4908). FEATURES Aluminum construction Anodized Blue in color INCLUDESOne Evo-5 Servo Guard REQUIRESInstallation on the...

These are the Rear Red Assembled Tires and Wheels from Traxxas FEATURES Rubber construction, SCT off-road design 5 spoke satin chrome wheels Red beadlock Dual profile INCLUDESTwo Rear Assembled Tires and Wheels with Red Beadlock REQUIRESInstallation...

This is the Receiver Box for the Traxxas Slash and E-Revo Trucks. FEATURES:Replaces damaged receiver boxesConstructed of black plastic INCLUDES:One top and bottom half receiver box for the Traxxas SlashHardware REQUIRES:Installing receiver and bolting...

Traxxas Splined 17mm Wheel Nuts (blue-anodized) (4) This set of four 17 mm blue aluminum wheel nuts is beautiful anodized for eye-catching looks with Traxxas-tough durability.

This is the Stock Replacement Bumber Mount Set for the Traxxas T/E Maxx trucks. These mounts attach the bumpers to the bulkheads. FEATURES:Black nylon construction INCLUDES:One L&R Front Bumper Mount SetOne L&R Rear Bumper Mount SetEight 3x15mm...

This is a pair of Traxxas Steel Center Driveshafts for the Traxxas T-Maxx 3.3 model 4909 with Opti-Drive Transmission.This WILL NOT FIT model 4907 or 4908 versions of the T-Maxx 3.3.FEATURES: Outside U-joint is lubricated and sealed by a rubber boot to...

These are the Traxxas Red Aluminum Rear Stub Axle Carriers with Bearings for the Traxxas Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles. These fit XL-5 and VXL versions of those vehicles.Traxxas aluminum stub axle carriers add both strength and...

This is a set of Traxxas Rod ends (12)/ hollow balls (12) Set of twelve rod ends come assembled with hollow balls. Replacement Part ForDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150 RaptorFord F-150 Raptor R 4X4Hoss 4X4...

This is a set of two Traxxas Talon Tires and foam inserts for the Traxxas Revo and T-Maxx 3.3 rims (3.8").  These tires will fit all of the 3.8" wheels from Traxxas.  They feature soft compound treaded rubber and...

This is a Traxxas Revo Red Aluminum Pushrod Set (2 rods) with rod ends for use with Progressive 3 Rockers (part TRA5359). The pushrods are 112mm in length.  These pushrods are strong, and look awesome installed.  If you would like to...

This is the Traxxas Dirt Oval Graphite Gray Dual Profile (2.2” Outer, 3.0” Inner) Wheels (4WD front/rear, 2WD rear only) (2) Wheels, dirt oval, graphite gray, dual profile (2.2” outer, 3.0” inner) (2) (4WD front/rear, 2WD rear...

This is the Traxxas Dirt Oval Hoosier Dual Profile Tires with Foam Inserts (2) Tires, Hoosier (Dual Profile 4.3x1.7- 2.2/3.0") (2)/ foam inserts (2) *Replaces Tires TRA10470 *Requires 10471X or 10472X for mounting Accessory Part ForSlash Modified

This is the Traxxas Dirt Oval Graphite Gray Dual Profile (2.2” Outer, 3.0” Inner) Wheels (2WD front only) (2) Wheels, dirt oval, graphite gray, dual profile (2.2” outer, 3.0” inner) (2) (2WD front only) *Replaces wheels...

This is the GPM Silver 7075 Alloy Front Steering Blocks and Rear Hub Stub Axle Carriers With Oversize Bearing for Mini Maxx 7075 alloy material with enlarged bearing design for more precise steering. Designed to stabilize the CVD and bearings.Replaces...

This is the GPM Red 7075 Alloy Front Steering Blocks and Rear Hub Stub Axle Carriers With Oversize Bearing for Mini Maxx 7075 alloy material with enlarged bearing design for more precise steering. Designed to stabilize the CVD and bearings.Replaces stock...

This is the GPM Green 7075 Alloy Front Steering Blocks and Rear Hub Stub Axle Carriers With Oversize Bearing for Mini Maxx 7075 alloy material with enlarged bearing design for more precise steering. Designed to stabilize the CVD and bearings.Replaces...

This is the GPM Orange 7075 Alloy Front Steering Blocks and Rear Hub Stub Axle Carriers With Oversize Bearing for Mini Maxx 7075 alloy material with enlarged bearing design for more precise steering. Designed to stabilize the CVD and bearings.Replaces...

This is the GPM Black 7075 Alloy Front Steering Blocks and Rear Hub Stub Axle Carriers With Oversize Bearing for Mini Maxx 7075 alloy material with enlarged bearing design for more precise steering. Designed to stabilize the CVD and bearings.Replaces...

This is the GPM Blue 7075 Alloy Front Steering Blocks and Rear Hub Stub Axle Carriers With Oversize Bearing for Mini Maxx 7075 alloy material with enlarged bearing design for more precise steering. Designed to stabilize the CVD and bearings.Replaces...

This is the Traxxas Mini Maxx Rear Suspension Arm Set Replacement Mini Maxx rear suspension arm set. Includes (2) Upper Arms(1) Lower Left Arm(1) Lower Right Arm Replacement Part ForMini Maxx

This is the Traxxas Front Suspension Arms (Upper (2)/ Lower Left (1)/ Lower Right (1)) Replacement Mini Maxx front suspension arm set. Includes: Upper Arms (2) and Lower Left and Right Arms. Replacement Part ForMini Maxx

This is the GPM Green 7075 Alloy Front Steering Toe Links 7075 Alloy is a light material anodized for longer durability, corrosion resistant and aesthetics. It has a high tensile strength for greater durability. The design for the steel pivot ball...

This is the Pro-Line Pre-Cut Ford F-100 Bash Armor Black Body: X-Maxx This is a Pre-Cut 1956 Ford F-100 Bash Armor Black Body for X-MAXX. Pro-Line is excited to bring retro classic styling with the highly durable Bash Armor material! This old-school Ford...

This is the Viper Scale Racing Carbon Fiber HO Scale Car Display Block Made from Carbon fiber, the display block not only looks great but also comes with optional steel screws that you can screw in from the top or bottom that allow the car to sit up off...

This is the GPM Silver 7075 Alloy Front & Rear Tie Bar Mounts & Suspension Pin Retainers The 7075 alloy mount and stainless steel tie bar add greater durability and stability. CNC precision machining, lowers the gap in between lower arms and the...