This is the Traxxas X-Maxx Replacement Rear Bumper.FeaturesMolded composite plastic constructionIncludes: Rear BumperSpecificationsLength: 7.9" (202mm)Height: 1.6" (41mm)

This is the Traxxas Lower chassis, low CG (black). This is Traxxas part number 5831Part Number: 5831 / TRA5831FitsSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD VXL (low CG)Slash 2WD XL-5More detail coming soon! Please check your vehicle manual to...

This is the Traxxas High-Performance Vented Brake Disc for Revo, Slayer, and T-Maxx 3.3 trucks. The vented design dissipates heat better for stronger, more consistent braking throughout a run.FeaturesSteel construction, silver in colorTrue vented design...

This is a package of six Traxxas 4x12mm Button-Head Hex Machine Screws. Replacement part for these modelsDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0E-Revo VXL BrushlessFord F-150 RaptorFord Fiesta ST RallyHoss 4X4...

These are the Traxxas 3x10mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many of the Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL...

This is a pair of Traxxas 2555 Rear Suspension Arms. These are used on many vehicles, such as the Slash 2WD, Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede. Standard rear suspension arms Accessory Part ForFord F-150 RaptorNitro RustlerNitro...

This is the RPM Black Rear Shock Tower for Traxxas Slash 4x4, Stampede 4x4, 1/10 Rally, and Telluride vehicles. This replaces the stock Traxxas part #6838.RPM is proud to introduce our rear shock tower for the Traxxas Slash 4x4, Stampede 4x4, 1/10...

This is a pair of Traxxas GTR Shock Springs (XX-Long .874 Black) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks. Shock springs for 1/10 scale XX-long GTR shocks use high-quality spring steel with a durable white powder-coated finish. GTR...

This is the Castle Creations Phoenix Edge HV 120 Speed Control for use with 550, 600, and 700 class helicopters, or giant scale airplanes. The HV 120 handles up to 120-amps of continuous current and can be used with up to 12S LiPo battery packs. With the...

This is the Castle Creations Phoenix Edge HV 160 Speed Control for use with 700 or 800 class helicopters, or giant scale airplanes. The HV 160 handles up to 160-amps of continuous current and can be used with up to 12S LiPo battery packs. With the debut...

This is the Castle Creations Phoenix Edge 50-Amp 34-Volt Electronic Speed Control with 5-amp BEC. The Phoenix Edge 50 is intended for use in 450-class helicopters and fixed wing aircraft from .25-.35 size. As always, the Edge series of controllers offer...

This is the Castle Creations Phoenix Edge 100-Amp 34-Volt Electronic Speed Control with 5-amp BEC. The Phoenix Edge 100 is intended for use in helicopters ranging from 500 to 600 size, and fixed wing aircraft from .40-.90 size. As always, the Edge series...

This is the Castle Creations Talon 90 electronic speed control. Castle’s Talon 90 ESC sports a BEC designed for today’s servos, pumping out up to 20 amps peak power and 9 amps of continuous power to keep even the hungriest servos happy.Features:Ideal...

These are the 3x6mm Flathead Machine Screws from Traxxas.FeaturesSteel constructionBlack in colorIncludesSix 3x6mm Flathead Machine ScrewsSpecificationsLength: 6mmDiameter: 3mm

This is the Pro-Line 1972 Chevy C10 body for the Traxxas Nitro and Electric Stampede 2WD and 4x4 trucks, as well as rock crawlers like the Axial AX10, SCX10, and Tamiya CR-01. The body is supplied unpainted.OverviewThere’s nothing like a classic truck!...

This is the Suspension Pin Set for the Traxxas Slash 4X4.  The hinge pins hold the suspension arms to the bulkheads. Complete front and rear suspension pin set FEATURES Durable steel construction Silver in color INCLUDESFour 51.5mm pins Four 30mm...

These are the Traxxas Constant Velocity Driveshafts for use on the 1/16 E-Revo, E-Revo VXL, and 1/16 Grave Digger trucks. Traxxas Steel Constant Velocity Driveshafts are designed to handle the extreme horsepower and articulation that Traxxas...

This is a package of six 3x12mm Traxxas Countersunk Hex Head Screws. Features:Steel constructionBlack in colorUsed on the Traxxas Revo monster truck, can also be used in any application where a 3x12mm countersunk screw is required Includes: Six 3x12mm...

This is the Pro-Line 1980 Chevy Pick-Up Body for the T-Maxx, E-Maxx, E-Revo, Revo 3.3, MGT Features Made with Genuine GE .060 lexan Classic body lines Stock/Custom decal included Includes decal sheet, window mask Overview Theres nothing like a...

This is a 26 Tooth, 48 Pitch Pinion Gear with Set Screw from Traxxas. FEATURES:Steel construction, silver in color INCLUDES:One 26 Tooth, 48 Pitch Pinion GearOne 3x4mm Set Screw (1.5mm hex size) REQUIRES:Installation SPECS:Length: .42" (10.5mm)Inside...

This is the 18-T Pinion (48-pitch) Gear with Set Screw 18-Tooth Pinion Gear (48-Pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance...

This is the Hitec HS-322HD Deluxe Standard Karbonite Gear Servo with the Universal Connector.  Because this has the universal connector, it will work with JR, Hitec, Futaba, and Airtronics Z radio systems.  This servo is a...

This is the Hitec HS-225MG Precision Mighty Mini Ball-Bearing Metal-Geared Servo.  This servo has the universal connector, and it will work with all current JR, Hitec, Futaba, and Airtronics Z radio systems and wiring. The HS-225MG series...

This is a package of Traxxas Large Rod Ends and Hollow Balls for the Revo 2.5 and 3.3 trucks.  There are 12 rod ends and hollow balls per package. FEATURES:Plastic constructionBlack in colorMetal Pivot Balls INCLUDES:12 Rod Ends12...

This is the Traxxas Single Speed Conversion Kit for the T-Maxx 2.5. This reduces weight and rotational mass, allowing for quicker revs. Convert your two-speed T-Maxx transmission to a single-speed unit for reduced weight and less rotational mass with...

This is the Traxxas Optional Big Bore Shock Set for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, and E-Maxx Trucks.  These replace the plastic shocks that come stock with the kit.  This includes everything to get the full set of eight shocks...

This is the Viper Scale Racing HO Scale Black Aluminum Parts Tray Tired of loosing parts for that special build? The HO Aluminum parts tray is the prefect size for any HO project. Made of lightweight anodized aluminum.   **Slot Car Chassis NOT...

This is the Traxxas Dirt Oval Graphite Gray Wheels with Hoosier Tires (4WD Front/Rear, 2WD Rear Only) (2) Tires & wheels, assembled, glued (dirt oval, graphite gray wheels, Hoosier tires, foam inserts) (2) (4WD front/rear, 2WD rear only) *Replaces...

This is the Traxxas Dirt Oval Graphite Gray Wheels with Hoosier Tires (2WD Front Only) (2) Tires & wheels, assembled, glued (dirt oval, graphite gray wheels, Hoosier tires, foam inserts) (2) (2WD front only) *Replaces Tire TRA10473 Replacement Part...

This is the Traxxas Mini Maxx Gray Aluminum GTR Shocks Give your Mini Maxx the ultimate suspension upgrade with aluminum GTR shocks. The brilliantly-anodized aluminum shock bodies are coated with PTFE for the slickest damping action available. Their...

This is the Traxxas Mini Maxx Red Aluminum GTR Shocks Give your Mini Maxx the ultimate suspension upgrade with aluminum GTR shocks. The brilliantly-anodized aluminum shock bodies are coated with PTFE for the slickest damping action available. Their large...

This is the Traxxas Mini Maxx Green Aluminum GTR Shocks Give your Mini Maxx the ultimate suspension upgrade with aluminum GTR shocks. The brilliantly-anodized aluminum shock bodies are coated with PTFE for the slickest damping action available. Their...

This is the Traxxas Mini Maxx Orange Aluminum GTR Shocks Give your Mini Maxx the ultimate suspension upgrade with aluminum GTR shocks. The brilliantly-anodized aluminum shock bodies are coated with PTFE for the slickest damping action available. Their...

This is the Traxxas Mini Maxx Blue Aluminum GTR Shocks Give your Mini Maxx the ultimate suspension upgrade with aluminum GTR shocks. The brilliantly-anodized aluminum shock bodies are coated with PTFE for the slickest damping action available. Their...

This is the Hot Racing dirt guard chassis cover for the 1/10 scale TRA Rally VXL and Slash 4X4 with the Low Center of Gravity (Low-CG, LCG) chassis. The chassis cover attaches to the chassis with easy-to-apply hook and loop tape; has zipper chassis...

This is the GPM Black 4140 Medium Carbon Steel Center Driveshaft Set for XRT The 4140 Medium carbon steel center driveshaft set is an ideal upgrade product for your XRT. It directly replaces the original part #7755 for improved strength and wear...

This is the Traxxas Aluminum Differential Carrier and Seals Replacement aluminum differential carrier and seals for the 10280A center differential. *Not compatible with 8980 center differential Includes (4) 3x15 mm screws (4) Replacement Part ForMaxx...

This is the Traxxas Maxx/Maxx Slash Hardened Steel Center Differential and Output Gear Replacement hardened steel differential gears for the 10280A center differential. *Not compatible with 8980 center differential Replacement Part ForMaxx SlashMaxx...

This is the Traxxas Maxx/Maxx Slash Complete Center Differential Kit With Aluminum Carrier (20MM wt Differential Fluid) The high-performance center differential absorbs driveline shocks to improve durability and distribute power evenly for mind-bending...

This is the Traxxas Maxx/Maxx Slash Complete Center Differential Kit With Aluminum Carrier (100K wt Differential Fluid) The high-performance center differential absorbs driveline shocks to improve durability and distribute power evenly for mind-bending...