This is the Traxxas 4-Amp DC Charger. This charger can be used with 6-cell 7.2V and 7-cell 8.4V NiMH Traxxas iD Batteries.FeaturesTraxxas's iD technology automatically configures and optimizes charge settings for Traxxas iD equipped 6-7 cell NiMH...

This is a set of six Traxxas Wheel Hex Clips for the X-Maxx monster truck.FeaturesSteel constructionSnaps onto groove of each stub axle to hold wheel hub and uprights in placeIncludes: Six Wheel Hex Clips Accessory Part ForX-MaxxXRT

This is the Traxxas Driveshaft Assembly, Front/Rear.Set of two driveshaft assemblies Fit: Front or RearReplacement Part For1/18 LaTrax Desert Prerunner1/18 LaTrax Teton

This is the Traxxas 17-Tooth Pinion Gear with 0.8 Mod (compatible with 32-pitch) for 5mm Shaft motors. This can be used on vehicles such as the E-Maxx Brushless and 1/10 Summit. 17-tooth pinion gear (32-pitch) fits 5 mm motor shafts and includes set...

This is the Traxxas Blue Aluminum Header for Rear Exhaust TRX 2.5, 2.5R, and 3.3 Engines on the Nitro 4-Tec, Nitro Rustler, and Nitro Slash trucks.FitsNitro RustlerNitro SlashTRX 2.5RTRX 3.3

This is the Traxxas Transmission Gear Dust Cover Set with Screws for the Bandit, Rustler, Slash 2WD, and Stampede 2WD trucks. This set is designed to accommodate telemetry sensors.IncludesTransmission Gear Dust Cover3x6 mm round head screws (to mount...

This is a pair of Traxxas Long Gray Ultra Shocks, Complete with Springs, Pre-Load Spacers, and Shock Oil. Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect seal and super-smooth performance. Features two pre-assembled gray shock bodies...

This is a Traxxas Servo Case for 2018 servos.FeaturesReplaces top, center and bottom sections of damaged servo casesConstructed of black plasticIncludesOne Servo Case Set for the Traxxas #2018 Servo with top, center and bottom...

This is a set of DuBro Small Nylon RC Airplane Hinges. Each package includes 15 hinges. These feature nylon construction and a steel hinge pin for excellent strength and durability. The hinges have six holes in each side for maximum holding power once...

This is the RPM Blue Front Bumper and Skid Plate Set for the Traxxas Slash 4x4 Short Course Trucks.When Traxxas first announced the 4x4 version of the Slash, RPM customers immediately started asking us if our 2wd version parts would fit it. Sadly, that...

These are the RPM Black Front Left Suspension A-Arms for Traxxas 1/10 Summit, E-Revo, E-Revo Brushless, and Revo 3.3 vehicles.In response to repeated customer demands, we have a set of front left A-arms now available for the Traxxas Summit. Our front...

This is a pair of Traxxas 1/16 Summit Canyon AT Tires mounted on Geode Wheels with Red Simulated Beadlocks. The tires come pre-mounted, so you can install and use them right away!INCLUDES:Two mounted Left & Right Canyon AT tires with foamsTwo Geode...

This is the Robinson Racing Gen3 Slipper Kit with 56-Tooth 0.8M Steel Spur Gear for the Traxxas Slash 2WD trucks.GEN3 Slipper Units will not fail under the enormous load conditions of today's high-performance brushless motor systems. The new GEN3...

This is the Robinson Racing Gen3 Slipper Kit with 38-Tooth 1.0M Steel Spur Gear for the Traxxas Revo 3.3 trucks.GEN3 Slipper Units will not fail under the enormous load conditions of today's high-performance engines.  The new GEN3 Slipper Unit is a...

This is the Traxxas Skid Plate Set for use on the 1/16 E-Revo and Slash VXL Vehicles. Features: Nylon construction Black in color Includes:One Front SkidplateOne Rear SkidplateOne Transmission Skid PlateTwo Steering Servo GuardsOne Steering Servo Cover...

This is a Robinson Racing 5mm-1/8" Pinion Gear Reducer Sleeve. This adapts 5mm Pinions to 1/8" motor shafts. Features: Metal Construction Gunmetal in Color Includes: One Reducer Sleeve

This is the RPM Black Front Skid Plate for the Traxxas Slash 2WD Short Course Trucks. RPM front skid plates for the Traxxas Slash 2WD are designed using the same principles we used when creating our Slash rear skid plates. Our ultimate goals were to...

These are a set of 2.2" Mounted Satin Chrome Wheels and Tires for the Traxxas Slash, TRAC43**. FEATURES:Rear tires2.2" Satin Chrome WheelsOff-Road Racing Tires5 spoke design INCLUDES:Two 2.2" mounted Off-Road Racing Tires, Satin Chrome WheelsFoam...

These are the Wheelie Bar Wheels for the Traxxas 3.3 T-Maxx. FEATURES:Constructed of hard plasticAxles constructed of steel INCLUDES:Four wheels and two axles REQUIRES:Installing on wheelie bar SPECS:Thickness: 0.39" (10mm)Diameter:  1.02" (26.1mm)

This is the 16-T Pinion (48-pitch) Gear with Set Screw 16-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance...

This is the Robinson Racing 40-Tooth Steel Spur Gear and 16-Tooth Steel Clutch Bell set for the Traxxas Revo 2.5 and 3.3 trucks.  This gear set will greatly increase the durability of your truck.  These are a must for high-performance and...

This is an RPM Blue Front Right Suspension A-Arm Set for the Traxxas Revo 2.5, 3.3, E-Revo, E-Revo Brushless, and 1/10 Summit trucks. This includes one front right upper and one front right lower arm. Be sure to check out our other RPM arms to make a...

This is the Traxxas Green HD WideMaxx Suspension Kit: Mini Maxx The mini WideMaxx kit widens Mini Maxx’s stance for even greater cornering stability. Molded from our toughest composite material, WideMaxx kits are available in multiple high-impact...

This is the Traxxas Blue HD WideMaxx Suspension Kit: Mini Maxx The mini WideMaxx kit widens Mini Maxx’s stance for even greater cornering stability. Molded from our toughest composite material, WideMaxx kits are available in multiple high-impact...

This is the Traxxas Red HD WideMaxx Suspension Kit: Mini Maxx The mini WideMaxx kit widens Mini Maxx’s stance for even greater cornering stability. Molded from our toughest composite material, WideMaxx kits are available in multiple high-impact...

This is the Traxxas Black HD WideMaxx Suspension Kit: Mini Maxx The mini WideMaxx kit widens Mini Maxx’s stance for even greater cornering stability. Molded from our toughest composite material, WideMaxx kits are available in multiple high-impact...

This is the Traxxas Orange HD WideMaxx Suspension Kit: Mini Maxx The mini WideMaxx kit widens Mini Maxx’s stance for even greater cornering stability. Molded from our toughest composite material, WideMaxx kits are available in multiple high-impact...

This is the Viper Scale Racing Viper Billet .275 Double Flange Rims (Narrow) The .275″ rear rims from Viper Scale Racing. These rims are a great way to increase tire sizes across the board with our current offering of Performance Slip Ons by ...

This is the Viper Scale Racing Viper Billet .250 Double Flange Rims (Narrow) Viper precision machined billet racing wheels. These Narrow double flange wheels are built to the highest standards, everything from the material to the concentricity. This...

This is the Viper Scale Racing Viper .265 Single Flange Rims (Pair) VSR precision machined billet racing wheels. These single flange wheels are built to the highest standards, everything from the material to the concentricity. This means a smoother,...

This is the Traxxas BL-2s Waterproof Brushless ESC BL-2s Brushless Electronic Speed ControlThe waterproof BL-2s speed control delivers all the benefits of brushless technology with the safety and convenience features you expect from Traxxas. Built-in...

These are the GPM Racing Silver Aluminum Lower Suspension Arms for the Front or Rear of the Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, XO-1, or the rear of the Stampede 2WD and Rustler 2WD vehicles. These are made of 6061-T6 aluminum for improved...

These are the GPM Racing Blue Aluminum Adjustable 87mm Front Piggyback Shocks for Traxxas Slash 4x4, Rustler 4x4, and Stampede 4x4 trucks. Made of 6061-T6 aluminum, with a beefy 4mm steel shock shaft, these are a great upgrade for bashers and show trucks...

This is the GPM Racing Black Aluminum 25T Spline Servo Horn with Stainless Steel Adjustable Linkage for Traxxas Unlimited Desert Racer trucks. The servo arm itself is held onto the shaft with a screw into the shaft, as well as a clamping screw, for a...

This is the GPM Racing Blue Aluminum Steering Servo Arm Horn for 25T Spline Servos on the Traxxas X-Maxx trucks. These fit the Traxxas 2085 and 2085X servos only.This is an upgrade for the stock Traxxas servo arm in part 7747.Accessory Part ForTraxxas...

These are the GPM Racing Gunmetal Aluminum Lower Suspension Arms for the Front or Rear of the Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, XO-1, or the rear of the Stampede 2WD and Rustler 2WD vehicles. These are made of 6061-T6 aluminum for...

This is the GPM Racing Blue Complete Aluminum Suspension Arm Set for the Traxxas 1/10 E-Revo 2.0 VXL Brushless trucks. Made of 6061-T6 aluminum, this arm set is incredibly tough. A full set of suspension hinge pins and mounting hardware is included.This...

This is the GPM Racing Black Aluminum Rear Skid Plate for the Traxxas 1/10 E-Revo 2.0 VXL Brushless trucks. Made of 6061-T6 aluminum and finished in anodized coloring, these are super durable and help make your truck stand out! Stainless steel...

This is the GPM Racing Silver Aluminum Cush Drive Housing for Traxxas E-Revo 2.0 and X-Maxx 8S trucks. Made of 6061-T6 aluminum, this is an excellent upgrade and looks great as well.Direct replacement upgrade for Traxxas part 7793X cush drive housing...

This is the GPM Racing Red Aluminum Front Bulkhead for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, Bandit, Nitro Slash, Nitro Rustler, and Nitro Stampede trucks.This is a direct fit upgrade for the stock Traxxas part 2530A bulkheads...