This is the Traxxas Chevrolet C10 Black Body. Included is the wing and decals. **Requires part #9415 series body accessories to complete body Accessory Part ForDrag Slash

This is the Gen3 RC 8-Piece Rubber Sealed Wheel Bearing Kit for Traxxas 1/16 E-Revo, 1/16 Slash, and 1/16 Summit Axle Carriers.Features Super durable black rubber seals offer excellent protection against the harshest elements Pre-lubricated...

This is the GPM Racing Blue Aluminum Front Shock Tower for Traxxas Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel...

This is the Pro-Line Badlands MX28 2.8" Tires on Black Raid 6x30 Front or Rear Adjustable Offset Wheels (2) with 12mm Hex. The removable hex design makes these super versatile, and easy to repair should you damage a hex. These can be used with Traxxas...

This is the GPM Racing Black Aluminum Rear Gearbox for Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and XO-1 vehicles. Made of 6061-T6 aluminum, these are super rigid and prevent flex that can lead to damaged differential gears. The finned...

This is the GPM Racing Black Aluminum Front Bumper with D-Rings for the Traxxas 1/10 E-Revo 2.0 VXL, Revo 3.3 nitro, as well as previous 1/10 E-Revo trucks. Whether you're building a realistic monster truck or the ultimate off-road basher, these look...

This is the GPM Racing Green Aluminum Front Bulkhead for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, Bandit, Nitro Slash, Nitro Rustler, and Nitro Stampede trucks.This is a direct fit upgrade for the stock Traxxas part 2530A bulkheads...

This is the GPM Racing Gunmetal Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature steel axles and CVD joints, with the main shaft...

This is the GPM Racing Black Aluminum Motor Mount for use in Traxxas Rustler 4x4 and Slash 4x4 low-CG chassis trucks. This will also fit the Traxxas 1/10 Rally cars. Made of 6061-T6 aluminum, this reduces flex and looks great. Stainless steel hardware...

These are the GPM Racing Blue Aluminum Caster Blocks for Traxxas electric Slash 2WD, Stampede 2WD, Rustler 2WD, and others vehicles listed below. Machined from 6061-T6 aluminum, these are a great way to add strength, tighten up handling, and dress up...

This is the GPM Racing Blue Aluminum Cush Drive Housing for Traxxas E-Revo 2.0 and X-Maxx 8S trucks. Made of 6061-T6 aluminum, this is an excellent upgrade and looks great as well.Direct replacement upgrade for Traxxas part 7793X cush drive housing...

These are the Pro-Line Interco TSL SX Super Swamper XL 2.2 G8 Rock Terrain Truck Tires with Foam Inserts. At 5.8" tall, these are BIG!Under official license from Interco Tire Corporation, Pro-Line is proud to announce the 2.2" TSL SX Super Swamper XL in...

This is the Savox SB-2292SG Monster Performance Black Edition Brushless High Voltage Steel Gear Servo, featuring a .07 sec/60 deg transit time and 430 oz/in of torque. The powerful "Monster" performance series from Savox utilize an all aluminum case,...

These are the Traxxas E-Revo 2 Green 17mm Splined Hex 3.8 Wheels (2).Accessory Part ForE-Revo 2.0

These are the Traxxas Unlimited Desert Racer Front Differential Ring and Pinion Gears. These are stock replacement diff gears.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas Unlimited Desert Racer Front Bumper and Support.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas TRX-4 Machined Steel Overdrive Differential Ring and Pinion Gear Set. This will fit the front or rear diff on the TRX-4 trucks. Use of this set results in higher wheel speed. This includes a 12-tooth pinion gear and 33-tooth ring...

This is a pair of Traxxas TRX-4 Tactical 1.9" Wheels.Stock Replacement OnTRX-4 TacticalAccessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land RoverTRX-4 Sport

This is a pair of Traxxas Green Rear Springs for XXL Rear Ultra Shocks on trucks such as the Rustler, Slash 2WD, and Stampede.Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150 RaptorHoss 4X4 VXLNitro SlashRustler VXLRustlerSlash 2WD...

This is the RPM Blue Rear Bumper for Traxxas Rustler XL-5 and VXL electric trucks.Are you looking for an actual rear bumper for your electric Rustler? We have you covered! Our Rustler rear bumper is designed to protect the rear of the chassis, the motor...

This is the Traxxas 24-Tooth 48-Pitch Pinion Gear with Set Screw. This can be used with the the 4-Tec 2.0, or any other vehicle requiring a 24T 48-pitch pinion gear.Fits4-Tec 2.0

This is the Hot Racing Aluminum 36mm Full Coverage Water Cooling Jacket for the Traxxas Spartan boat.FEATURES:- CNC machined billet aluminum construction- Full coverage and machined cooling fins for increased heat transfer- O-ring seals for leak...

This is the Hot Racing 27-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerYOU WILL...

This is the Robinson Racing Extra Hard Steel 14-Tooth 0.8 Mod Pinion Gear with 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless, and Summit...

This is the Traxxas 4-Amp DC Charger. This charger can be used with 6-cell 7.2V and 7-cell 8.4V NiMH Traxxas iD Batteries.FeaturesTraxxas's iD technology automatically configures and optimizes charge settings for Traxxas iD equipped 6-7 cell NiMH...

This is a set of six Traxxas Wheel Hex Clips for the X-Maxx monster truck.FeaturesSteel constructionSnaps onto groove of each stub axle to hold wheel hub and uprights in placeIncludes: Six Wheel Hex Clips Accessory Part ForX-MaxxXRT

This is the Traxxas Driveshaft Assembly, Front/Rear.Set of two driveshaft assemblies Fit: Front or RearReplacement Part For1/18 LaTrax Desert Prerunner1/18 LaTrax Teton

This is the Traxxas 17-Tooth Pinion Gear with 0.8 Mod (compatible with 32-pitch) for 5mm Shaft motors. This can be used on vehicles such as the E-Maxx Brushless and 1/10 Summit. 17-tooth pinion gear (32-pitch) fits 5 mm motor shafts and includes set...

This is the Traxxas Blue Aluminum Header for Rear Exhaust TRX 2.5, 2.5R, and 3.3 Engines on the Nitro 4-Tec, Nitro Rustler, and Nitro Slash trucks.FitsNitro RustlerNitro SlashTRX 2.5RTRX 3.3

This is the Traxxas Transmission Gear Dust Cover Set with Screws for the Bandit, Rustler, Slash 2WD, and Stampede 2WD trucks. This set is designed to accommodate telemetry sensors.IncludesTransmission Gear Dust Cover3x6 mm round head screws (to mount...

This is a pair of Traxxas Long Gray Ultra Shocks, Complete with Springs, Pre-Load Spacers, and Shock Oil. Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect seal and super-smooth performance. Features two pre-assembled gray shock bodies...

This is a Traxxas Servo Case for 2018 servos.FeaturesReplaces top, center and bottom sections of damaged servo casesConstructed of black plasticIncludesOne Servo Case Set for the Traxxas #2018 Servo with top, center and bottom...

This is a set of DuBro Small Nylon RC Airplane Hinges. Each package includes 15 hinges. These feature nylon construction and a steel hinge pin for excellent strength and durability. The hinges have six holes in each side for maximum holding power once...

This is the RPM Blue Front Bumper and Skid Plate Set for the Traxxas Slash 4x4 Short Course Trucks.When Traxxas first announced the 4x4 version of the Slash, RPM customers immediately started asking us if our 2wd version parts would fit it. Sadly, that...

These are the RPM Black Front Left Suspension A-Arms for Traxxas 1/10 Summit, E-Revo, E-Revo Brushless, and Revo 3.3 vehicles.In response to repeated customer demands, we have a set of front left A-arms now available for the Traxxas Summit. Our front...

This is a pair of Traxxas 1/16 Summit Canyon AT Tires mounted on Geode Wheels with Red Simulated Beadlocks. The tires come pre-mounted, so you can install and use them right away!INCLUDES:Two mounted Left & Right Canyon AT tires with foamsTwo Geode...

This is the Robinson Racing Gen3 Slipper Kit with 56-Tooth 0.8M Steel Spur Gear for the Traxxas Slash 2WD trucks.GEN3 Slipper Units will not fail under the enormous load conditions of today's high-performance brushless motor systems. The new GEN3...

This is the Robinson Racing Gen3 Slipper Kit with 38-Tooth 1.0M Steel Spur Gear for the Traxxas Revo 3.3 trucks.GEN3 Slipper Units will not fail under the enormous load conditions of today's high-performance engines.  The new GEN3 Slipper Unit is a...

This is the Traxxas Skid Plate Set for use on the 1/16 E-Revo and Slash VXL Vehicles. Features: Nylon construction Black in color Includes:One Front SkidplateOne Rear SkidplateOne Transmission Skid PlateTwo Steering Servo GuardsOne Steering Servo Cover...

This is a Robinson Racing 5mm-1/8" Pinion Gear Reducer Sleeve. This adapts 5mm Pinions to 1/8" motor shafts. Features: Metal Construction Gunmetal in Color Includes: One Reducer Sleeve