This is the Traxxas 8x16x5mm Black Rubber Sealed Ball Bearings (2). Pair of 8x16x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate protection and less maintenance in dirty...

This is the Traxxas 12x21x5mm Black Rubber Sealed Ball Bearings (2). Pair of 12x21x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate protection and less maintenance in dirty...

This is the Traxxas 17x23x4mm Black Rubber Sealed Ball Bearings (2). Pair of 17x23x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate protection and less maintenance in dirty...

This is the Traxxas T-Maxx 3.3 Complete Transmission.  This is the complete replacement 2-speed, forward only transmission, including brake, slipper clutch, and spur gear. The Pro-Built 2-speed transmission arrives ready-to-install and precisely...

This is the Traxxas ESC Mounting Plate (for installation of XL-5/VXL into Bandit or Rustler). Speed control mounting plate. Replacement part forBandit VXLBanditRustler VXLRustler

This is the Traxxas Complete Transmission for 1/10 2WD Rustler, Bandit, Stampede, and Slash trucks.  This comes pre-assembled with internal gears, slipper clutch, and spur gears, making for an ultra-simply swap to get you back out racing or bashing...

This is the Traxxas ESC/Receiver Box Mounting Plate for Installation of XL-5/VXL & Waterproof Receiver Box on Stampede 2WD. ESC mounting plate for 2WD Stampede models.   Replacement part forBIGFOOT No. 1 Officially Licensed ReplicaStampede...

This is the Traxxas Velineon 540XL Brushless 2400Kv 70mm Motor (Assembled with 6.5mm Gold-Plated Bullet Connectors) (Not for use in Marine Models) The Velineon 540XL brushless motor delivers massive torque with brushless efficiency. Motor comes equipped...

This is the Traxxas Heat Sink for 3351R and 3461 Motors. The aluminum heat sink fits Velineon 3500 and 540XL brushless motors when installed in 4X4 vehicles. (Does not fit 2WD configurations). For more information on installing the heatsink and fan...

This is the Traxxas Cooling Fan Kit for 3351R and 3461 Motors (requires #3458 heat sink to mount). Lower your Velineon brushless motor’s temperatures with this cooling fan and shroud. The fan shroud screws onto the 3458 heat sink (sold separately)...

This is the Traxxas Complete Differential for the electric 1/10 2WD Rustler, Bandit, Stampede, and Slash trucks.  This is a great option for a quick and easy diff replacement. Compatible With Bandit VXLBandit XL-5CraniacRustler VXL 2WDRustler XL-5...

This is the GPM Racing Gunmetal Aluminum Front Shock Tower for Traxxas Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel...

This is the GPM Racing Green Aluminum Front Shock Tower for Traxxas Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel...

This is the Traxxas X-Maxx Rock N Roll Painted Body Assembled with Tailgate Protector and all Body Supports and Mounts Pre-Installed on the body.  This wild paint scheme is a great way to refresh your X-Maxx in minutes.  Pull it out of the...

This is the Gen3 RC 6061-T6 Orange Aluminum Stage 1 Upgrade Set for the Traxxas Rustler, Stampede 2WD, and Slash 2WD trucks. This set can be used on the XL-5 and VXL versions. Made of 6061-T6 aluminum, these parts are built to improve strength, look...

This is the Lectron Pro Dual Port 100W LiPo, LiFe, LiHV, NiMH, and NiCd Charger for use with AC or DC power input. With an output of 50W per channel, this charger is an economical way for most hobbyists to get a couple packs charged quickly. This...

This is the GPM Racing Heavy Duty Steel Front CVD Driveshaft Set with Stub Axles for Traxxas Unlimited Desert Racer trucks. These beefed up shafts are 6.5mm thick at the center versus 4.5mm stock, and HD steel stub axles for extreme durability.This is an...

This is the GPM Racing Red Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...

This is the GPM Racing Blue Aluminum Front Shock Tower for Traxxas 4-Tec 2.0 cars. These are machined from 6061-T6 aluminum for strength and durability, then anodized for a fantastic appearance. Stainless steel mounting hardware is included.These are an...

This is the Traxxas TRX-4 Expedition Rack and Mounting Hardware for use with the TRX-4 Sport body.

This is a pair of Traxxas Unlimited Desert Racer 139mm GTR 1.250 Rate Blue Stripe Progressive Shock Springs.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas 12-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...

This is a pair of Traxxas Blue Rear Springs for use on XXL Ultra Shocks.Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150 RaptorHoss 4X4 VXLNitro SlashRustler VXLRustlerSlash 2WD Unassembled KitSlash VXLSlashStampede 4X4 VXLStampede...

This is the Hot Racing Hardened Steel 48-Pitch 1/8" Bore Pinion Gear Set. This set includes a 24-tooth, 26-tooth, 28-tooth, and 30-tooth pinion gear.This set of gears is great for Traxxas Rustler XL-5, VXL, Stampede 2WD, Slash 2WD, HPI Savage XS, and...

This is the Hot Racing Aluminum Dual Water Pick-up Rudder Blade for the Traxxas DCB M41 Catamaran Boat. Add this to your boat for improved cooling options.FEATURES:- CNC machined billet aluminum construction- Dual water pickup for additional cooling-...

This is the Traxxas Cush Drive Transmission Input Shaft.Replacement part forX-Maxx XRT

This is the Traxxas X-Maxx ProGraphix Body with Decals. The body comes with graphics pre-printed, and allows you to spray one final color for a professional finish, even for beginners!FeaturesTrimmed with printed graphics applied (requires final color ...

This is the Traxxas X-Maxx Body with Masks & Decals (clear, requires painting). Set your X-Maxx apart from others with a custom paint scheme using this body!FeaturesMolded from clear polycarbonate plasticAllows X-Maxx drivers to create their own custom...

This is the Traxxas XO-1 Wing (Exocarbon) with Wing Mounts (2) and Washers (2) The XO-1 Exo-Carbon wing adds a glossy, high-tech carbon-fiber look to your supercar. The innovative Exo-Carbon finish forms a tough skin over the standard composite wing...

This is the Traxxas XO-1 Wing Includes Wing Mounts (2)Washers (2)Accessory Part ForXO-1

These are the Traxxas 2.5x10mm Cap-Head Hex Machine Screws. Each package includes six screws.Set of six 2.5x10 mm cap-head machine screws with hex-drive heads Replacement Part For:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit4-Tec 2.0 AWD...

This is a set of RPM Black Snap-Tite Body Savers. One of the weakest points on a Lexan body is where the body mounts to the chassis. The holes cut in the body for the body posts have a tendency to crack and fracture. This is the reason RPM designed these...

This is the RPM Black Front Bumper for Traxxas 1/16 E-Revo Trucks. This fits brushed and VXL brushless trucks.At just over 2'' wide, stock 1/16th scale Traxxas Mini E-Revo bumpers just aren't large enough to provide any protection to the front of these...

These are the RPM Black Adjustable Front/Rear Body Mounts for Slash 4x4, 1/10 Rally, or Stampede 4x4. RPM Adjustable Height Body Mounts for the Traxxas Slash 4x4 are designed to give you optional body height positions where stock left you none.Our...

This is the RPM Black Mock Intake and Supercharger Blower Set, designed to fit most 1/8 and 1/10 scale bodies. Are you into scale realism on your favorite R/C rides? Perhaps you just dropped some brushless / LiPo power in your ride and want to show off...

This is the Traxxas Low Center of Gravity (Low-CG) Chassis Conversion Kit for the Slash 4x4 trucks.  Lower your CG, increase corner speed, and lower your lap times!  Performance-proven with the Slash 4X4 Ultimate and 1/10 Rally models, Traxxas...

This is the Traxxas Rear Ring and Pinion Differential Gears for the Slash 4x4, Hoss 4x4, Stampede 4x4, Telluride, 1/10 Rally, and XO-1 vehicles. 37-tooth ring and 13-tooth pinion gears for rear differentials Includes:One Rear Differential Ring GearOne...

This is the Robinson Racing Gen3 Slipper Kit with 54-Tooth Steel Spur Gear for the Traxxas Stampede 4x4 VXL trucks.GEN3 Slipper Units will not fail under the enormous load conditions of today's high-performance engines.  The new GEN3 Slipper Unit is...

This is the Traxxas Replacement O-ring Header Gasket for the Traxxas 2.5, 2.5R, and 3.3 Engines. This is located on the header of the engine. Features: Red silicone construction. Includes: One 12.2x1mm o-ring

This is a pair of Traxxas 6x12mm Ball Bearings with Rubber Dirt Shields. Pair of 6x12x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction...