This is the Traxxas Front Upper Bulkhead Replacement front upper bulkhead. One-piece molded composite plastic construction. Fastens to lower front bulkhead and houses output gear Replacement Part ForX-MaxxXRT

This is the Pro-Line Trencher 2.8 Tires on Black Raid 6x30 Front or Rear Adjustable Offset Wheels (2) with 12mm Hex. The removable hex design makes these super versatile, and easy to repair should you damage a hex. These can be used with Traxxas 2WD...

This is the GPM Racing Black Aluminum Front Gearbox for Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and XO-1 vehicles. Made of 6061-T6 aluminum, these are super rigid and prevent flex that can lead to damaged differential gears. They look...

These are the GPM Racing Orange Aluminum Brake Disks with +3mm Offset Hex for Traxxas Unlimited Desert Racer trucks. These feature a silver disk surface for ultra-realistic looks. Made of 6061-T6 aluminum and anodized with a color finish, these look...

This is the GPM Racing Black Hardened Steel Differential Gear Set for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, 1/10 Rally, and XO-1 vehicles. These can be used as a drop-in upgrade to beef up the drivetrain in your vehicle.This gear set is a...

These are the the GPM Racing Silver Aluminum 25T Spline Servo Horns with Adjustable Stainless Steel Links for the Traxxas 1/10 E-Revo 2.0 VXL Brushless, 1/10 E-Revo Brushed & Brushless, and the 1/10 Summit trucks. Made of 6061-T6 aluminum and...

This is a pair of Traxxas 1/16 Geode Black Beadlock-Look Wheels with Canyon AT Tires. This pair comes with the tires pre-glued to the rims with foam inserts installed. The wheels have a 12mm hex. Dirt, mud, snow…no matter where you run your 1/16...

These are the Pro-Line Interco TSL SX Super Swamper XL 1.9 Predator Super Soft Rock Crawling Tires with Foam Inserts.Under official license from Interco Tire Corporation, Pro-Line is proud to announce the 1.9" TSL SX Super Swamper XL. The Super Swamper...

This is the Traxxas 4-Tec 2.0 Red Aluminum Center Driveshaft. This is an awesome addition to any tricked out 4-Tec 2.0 show car!Accessory Part For4-Tec 2.0 VXL4-Tec 2.0 XL-54-Tec 2.0 Mustang4-Tec 2.0 Ford GT

This is the Traxxas Stampede Hawaiian Painted Body. This comes pre-painted, trimmed, and ready for installation! These are a direct fit for Stampede XL-5 2WD, 4x4, and Stampede VXL 2WD and 4x4 trucks. Throw a shiny new body on your truck to bring back...

This is the Hot Racing Stainless Steel Prop Nut and Drive Dog for the Traxxas Spartan, Spartan SR and DCB M41 Catamaran Boats.FEATURES:- CNC machined stainless steel construction- Replaces factory hex nut with hydrodynamically efficient conical nut for...

This is the Traxxas X-Maxx 8S Steel CV-Driveshaft Only. Heavy-duty 160 mm X-Maxx steel constant-velocity driveshaft for 8s-spec heavy duty drivetrain. 6s truck upgrade also requires 7751X, 7754X, and 7768 or 7768R to complete installation. Replacement...

This is the Traxxas 24-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore. 24-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model...

This is the Traxxas 24-Tooth Clutch Bell with Fiber Washers and E-Clips. This can be used on Traxxas 1/10 nitro vehicles.Features:Fits Traxxas 1/10 scale nitro vehiclesConstructed of hardened steelIncludesOne Traxxas 24 Tooth Steel Clutch BellTwo 5mm x...

These are the Traxxas Rear Alias Tires Pre-Mounted on 2.8" Black Chrome All-Star Wheels for the Rustler XL-5 and Rustler VXL trucks. These have a 12mm hex, and are designed for the rear of the truck.Features:2.8" All Star black chrome wheelsRibbed...

This is a pair of Traxxas Front Anaconda Street Tires Pre-Mounted on Tracer Chrome Wheels for used on the Bandit XL-5 and VXL buggies. The wheels have a slotted hub on the back to slide over the pin on the axles.FEATURES:Rubber Anaconda 2.2" tiresSplit...

This is the Front and Rear Body Mount Set for the Traxxas Slash 2WD, Stampede 2WD, and Rustler trucks.  This includes front and rear body mounts with 6.5mm, 25mm, 38mm, and 52mm body post extensions Front and rear body posts and mounts. Includes the...

This is the Traxxas Center Differential Kit for the 1/16 E-Revo, Slash, and Summit vehicles. OverviewThe optional center differential helps balance the E-Revo VXL’s power distribution to reduce front end lift on acceleration and improve steering...

This is a Team Integy Aluminum Motor Heatsink with Cooling Fan (Red) for the Traxxas Slash 2WD, Stampede 2WD, Rustler and Bandit vehicles. This will only fit XL-5 versions.Heat is the enemy, especially when it comes to electric motors. Keep your...

This is the Traxxas Rear Suspension Arm Set for use on the 1/16 E-Revo VXL 4WD. Features: Nylon construction Black in color Includes:One Lower Right Suspension ArmOne Lower Left Suspension ArmTwo Rear Upper Left/Right Suspension Arms

This is a Team Integy Rear Progressive Spring Set for use on the Traxxas Slash trucks.  This includes three pairs of springs for more tuning options. Features: Steel construction Includes:Two Rear Red SpringsTwo Rear Yellow SpringsTwo Rear...

This is the Traxxas Titan 775 10-Turn Motor for the Traxxas 1/10 Summit. High-torque gets its spin from the largest brushed motor offered by Traxxas, the Titan 775. This massive mill is equipped with a fan-cooled five-pole armature for non-stop off-road...

This is the Traxxas Wheelie Bar for 1/16 E-Revo The patented Traxxas 1/16 scale adjustable wheelie bar features four position adjustment. The wheelie bar is intended for hard, high-traction surfaces where controlling wheelies can be difficult. The...

This is the Traxxas replacement #3631 Front Suspension Arms for for the Stampede 2WD and Rustler. FEATURES:Made from black molded nylon for the Traxxas Stampede 2WD and Rustler. SPECS:Length: 3 1/4"Thickness: 3/8"Width at end near chassis: 1 1/2"Width at...

This is the Blue Silicone Pipe Coupler for the T-Maxx 2.5 This goes between the tuned pipe and the header FEATURES:Blue silicone constructionFor use with pipes #5152 and #4452 INCLUDES:One pipe coupler REQUIRES:Installing on the vehicle with wire...

This is the GPM Racing Black Aluminum Rear Bumper with D-Rings for the Traxxas 1/10 E-Revo 2.0 VXL, Revo 3.3 nitro, as well as previous generation 1/10 E-Revo trucks. Whether you're building a realistic monster truck or the ultimate off-road basher,...

These are the GPM Racing Stainless Steel Adjustable Turnbuckle Links for Sway Bars on Traxxas Unlimited Desert Racer trucks. This set will upgrade both the front and rear links on the UDR, for a much more beefy setup than stock. Stainless steel...

This is the GPM Racing Red Steel and Aluminum Front CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature steel axles and CVD joints, with the main shaft made of...

This is the Traxxas TRX-4 Sport Front Bumper (178mm wide) with Mach Winch and 2.6x8 screw.Stock Replacement OnTRX-4 Sport

These are the Traxxas Unlimited Desert Racer Center Front Driveshafts with 4mm screw pin and 3x10 Capscrew.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas 17-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...

This is the Traxxas Spur gear, 46-tooth (1.0 metric pitch). 46-tooth spur gear (1.0 metric pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different...

This is the Traxxas High-Volume Air Filter Body and Filter for the T-Maxx 2.5 and 3.3 nitro trucks. This comes with the filter support, cap, foam filter, T-Maxx filter base (angled), wire mount and hardware.FitsS-MaxxSportmaxxT-Maxx 2.5T-Maxx 2.5RT-Maxx...

This is a pair of Traxxas Green 6061-T6 Aluminum 30-Degree Castor Blocks with vertical suspension screw pins. These high-quality aluminum castor blocks are strong, precise, and look great! These fit Slash 2WD, Stampede 2WD, Skully, Craniac, Rustler,...

This is the Traxxas XL-5 Waterproof Electronic Speed Control (ESC). This comes pre-wired with the Traxxas high-current connector. Designed and engineered by Traxxas, the XL-5 Electronic Speed Control handles the elements while smoothly supplying power...

This is the MIP C-CVD Driveshaft Set for the Traxxas Slash 2WD (XL-5 and VXL versions), Nitro Rustler and Nitro Stampede vehicles. FEATURESSteel construction INCLUDES Two C-CVD BonesTwo AxlesTwo Outdrive CupsTwo Capture RingsTwo Drive PinsTwo Cross...

This is a set of RPM Axle Carriers/Steering Blocks in Black for the Traxxas Revo 2.5, 3.3, E-Revo, Slayer, T-Maxx 2.5R, 3.3, and E-Maxx 16.8V trucks.  Oversized bearings are included.  These come with the RPM lifetime limited warranty...

These are Traxxas Aluminum Left and Right Steering Blocks for the 1/10 scale Slash 4x4, Stampede 4x4, Telluride, and 1/10 Rally vehicles. Precision-machined for total steering accuracy and bulletproof strength, Traxxas Aluminum Steering Blocks further...

These are the Traxxas Differential Output Yokes and Screw Pins for the Traxxas Bandit, Stampede 2WD, Slash 2WD, and Rustler trucks.FEATURESBlack plastic constructionINCLUDESTwo differntial output yokesTwo 3x5mm countersunk screwsTwo screw...

This is the Revolver Black Rock Crawler Wheels Wide Wheelbase from RPM Products. FEATURES: Black 10-hole pattern design Reinforced for strength and minimal weight Made of a nylon material Uses 12mm hex & max axle size = 6mm INCLUDES:Two 10-hole...