This is the RPM Green Gearbox Housing & Rear Mounts for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit. The RPM Hybrid Gearbox Housing and Rear Mounts for Traxxas 2wd vehicles is designed to solve a multitude of issues with stock and other...

This is the Integy Steel Roll Cage for Traxxas Slash XL-5 and VXL 2WD Short Course Trucks. The cage is welded into one piece for strength and durability. Finished black in color, the steel roll cage attaches to factory mounting points for easy...

This is a Traxxas 30-Tooth Steel Idler Gear.  This works on many Traxxas vehicles. Features: Steel construction Includes: One steel 30T idler gear

This is a set of Traxxas Long Truck Half-Shafts for the Rustler, Stampede, and Slash 2WD vehicles. Includes:2 white nylon telescoping shaft (each shaft is made of two pieces)4 aluminum U-joints

This is the Integy Blue Aluminum Front Bulkhead for the Traxxas Rustler and Slash 2WD FEATURES Aluminum construction Blue in color INCLUDESOne blue aluminum front bulkhead REQUIRESInstallation SPECSLength: 1.61" (41mm) at longest pointWidth: 2.91"...

This is a shock rebuild kit for 2 Traxxas black plastic shocks. Includes:4 E-clips2 C-clips2 O-rings8 Washers2 Diaphrams Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisChevrolet Corvette StingrayFord F-150 Raptor R 4X4Ford Fiesta ST...

This is the Hitec HS-311 Standard Universal Servo.  Because this has the universal connector, this servo that will work with all modern radio systems including JR, Futaba, Hitec, and Airtronics Z. The HS-311 sport servo provides the novice...

This is the Traxxas High-Torque Metal-Gear Sub-Micro Servo Give your TRX-4M the ultimate steering upgrade with this fully waterproof high-torque metal-gear sub-micro servo. With 75 oz-in of torque on tap, the 2265 servo cranks out double the torque of...

This is the Viper Scale Racing (YELLOW Colored Chassis) Viper Builders Kit Super 7 “HB” HO Slot Car Chassis All new Viper builders kit Super 7 “HB” Hardbody RTR chassis. Based on the Super 7 chassis that was developed by HC slots...

This is the Viper Scale Racing (WHITE Colored Chassis) Viper Builders Kit Super 7 “HB” HO Slot Car Chassis All new Viper builders kit Super 7 “HB” Hardbody RTR chassis. Based on the Super 7 chassis that was developed by HC slots...

This is the Viper Scale Racing (RED Colored Chassis) Viper Builders Kit Super 7 “HB” HO Slot Car Chassis All new Viper builders kit Super 7 “HB” Hardbody RTR chassis. Based on the Super 7 chassis that was developed by HC slots to...

This is the Viper Scale Racing (BLUE Colored Chassis) Viper Builders Kit Super 7 “HB” HO Slot Car Chassis All new Viper builders kit Super 7 “HB” Hardbody RTR chassis. Based on the Super 7 chassis that was developed by HC slots to...

This is the Traxxas Velineon Mini Maxx 380 Brushless Motor (Assembled with 16-Gauge Wire and Gold-Plated Connectors) The Velineon 380 Brushless Motor uses ultra high-temperature Neodymium magnets, high-speed ball bearings, and a precision balanced rotor...

This is the Spektrum 6200A 6-Channel AVC Surface Receiver. Built around frequency-agile DSMR technology, the Spektrum SR6200A 6-channel DSMR receiver delivers superb range and response along with unbeatable signal security in a compact, easy-to-install...

This is the Traxxas Differential ring gear, pinion gear, (machined spiral cut) (rear) Spiral-cut 37-tooth ring and 13-tooth pinion differential gear sets are CNC-machined from a solid block of steel. The teeth are cut with a slight curve to minimize...

These are the Traxxas Pink Aluminum 4mm Flanged Wheel Nuts (4). These wheel nuts fit a wide variety of Traxxas vehicles. Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The...

This is the Hot Racing Aluminum and Carbon Fiber Steering Bellcrank for Traxxas Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles. This will fit XL-5 brushed and VXL brushless vehicles. It replaces Traxxas part 3743.FEATURES:- CNC machined 6061...

This is the Hot Racing Front and Rear Sway Bar Set for Traxxas Slash 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles.FEATURES:Adjustable spring steel sway bar wire.YOU WILL RECEIVE:One Set of Front and rear Sway Bars WireTwo med chrome anti-roll bars.Four...

This is the Traxxas Cush Drive Key, Pin, and Elastomer Damper.FitsX-Maxx 8SXRT

This is the Traxxas Aton Rotor Blade Set (2) (Black) w/Screws. This is Traxxas part number 7926Part Number: 7926 / TRA7926FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have...

This is the Traxxas Gear, 9-T pinion (32-p) (mach. steel)/ set screw. This is Traxxas part number 6745Part Number: 6745 / TRA6745FitsStampede 4x4 VXLStampede 4x4 XL-5More detail coming soon! Please check your vehicle manual to confirm vehicle fitment,...

This a Traxxas Steel Replacement Constant-Velocity Driveshaft for Revo 3.3, 1/10 E-Revo, T-Maxx 3.3, and E-Maxx trucks using the Traxxas 5451R driveshaft set.Includes: One steel constant-velocity driveshaftSpecificationsLength: 5" (128.5mm) between...

This is a set of Traxxas 3mm Hardened Set Screws, also known as grub screws. Each package includes 12 set screws. Set of twelve 3 mm hardened steel grub screwsReplacement part for these models1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBanditDCB...

This is the Traxxas Bandit Replacement Body Set (front & rear) with window, lights, and grill decal sheet. This will work on the Bandit XL-5 and Bandit VXL buggies.RequiresPainting

These are the RPM White 4-40 HD Rod Ends for 4.3mm/0.17" Ball Studs. When it comes to rod ends, RPM rod ends are the basis for comparison! Our rod ends are strengthened in all the right places, they are molded to the strictest of tolerances, and are...

This is a pair of Pro-Line Badlands SC 2.2/3.0 M2 Medium Compound Short-Course Truck Tires.  Are you ready to chew up the dirt and spit it out in a huge spray behind your SC truck?  If so, then the Badlands SC tire is exactly the tire that you...

This is the Long RPM Sensor from Traxxas. The RPM sensor plugs directly into your TQi receiver to provide real-time speed and RPM data while you drive. Real-time telemetry requires a telemetry magnet, TQi radio with Traxxas Link Wireless...

These are the RPM Black Shock Shaft Guards for the Traxxas 1/10 Slash 2WD, Slash 4x4, Stampede, Rustler, Bandit, and 1/10 Rally vehicles. These do not fit vehicles using GTR shocks, so they will not work on Slash 4x4 Ultimate trucks.Rocks, dirt and...

These are the RPM Black Front Bearing Carriers / Steering Blocks for Traxxas Slash 2WD, Nitro Slash, Rustler XL-5 & VXL, Stampede 2WD XL-5 & VXL, Skully, Craniac, and Bigfoot trucks. These replace Traxxas 3736 steering blocks, and require using...

This is a Traxxas Fiberglass Tie Bar for the Nitro Rustler, Stampede, and Bandit. The fiberglass tie bar strengthens the front bulkhead and suspension arms. Requires #2640 suspension pins to complete installation. FEATURES Fiberglass...

This is the Traxxas Velineon VXL-3m Brushless Power System for use in Traxxas 1/16 Scale vehicles. This will not fit 1/10 scale vehicles.Like its larger 1/10 scale counterpart, the 1/16 scale Velineon VXL-3m electronic speed control and 380-size 4000 kV...

These are the Integy Blue Aluminum Rear Lower Arms for the Traxxas Stampede and Rustler XL-5 and VXL trucks. FEATURES Aluminum construction, anodized blue in color INCLUDESTwo aluminum rear lower arms REQUIRESInstallation on the Stampede or...

This is the Traxxas Differential Kit for the Traxxas 1/10 E-Revo, E-Revo Brushless, and E-Maxx 16.8V, and E-Maxx Brushless trucks.The new Traxxas center differential for E-Revo and E-Maxx independently transfers power from the transmission to the...

This is a Package of Replacement Caster Spacers for the Traxxas 2.5 T-Maxx. These spacers adjust caster of the wheels. FEATURES:Black nylon construction. INCLUDES:Four caster spacersFour caster shims REQUIRES:Nothing.  These are direct replacement...

This is the Traxxas 23-T Pinion Gear (48-pitch) w/Set Screw 23-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance...

This is the Hitec HS-5645MG Digital High-Torque 2 Ball-Bearing Metal-Geared Programmable Servo with the Universal Connector.  Because this has the universal connector, it will work with all current JR, Futaba, Hitec, and Airtronics Z radio systems...

This is the Traxxas Long Arm Lift Kit, TRX-4, Complete (Includes Green Powder Coated Links, Green-Anodized Shocks) The Traxxas Long Arm Lift Kit raises your TRX-4 to accommodate larger 2.2″ wheels and tires for more terrain-conquering ground...

This is the Gen3 RC 8-Piece Rubber-Sealed Ball Bearing Kit for the Traxxas X-Maxx Stub Axle Carriers and Steering Blocks to support the stub axles for the wheels.  This complete set will outfit all four wheels of the X-Maxx 6S or 8S trucks...

This is the Hot Racing 50-T Mod 1 Hardened Steel Spur Gear for Traxxas E-Revo 2.0, X-Maxx 6S & 8S, and XO-1 vehicles.This is an upgrade to the Traxxas 6448 or 6448X gears.Features- CNC machined hardened steel construction- Black oxide finished- Laser...

This is the Gen3 RC 6061-T6 Black Aluminum Stage 3 Upgrade Set for the Traxxas Rustler 2WD trucks. This set can be used on the XL-5 and VXL versions. Made of 6061-T6 aluminum, these parts are built to improve strength, look great, and tighten up the...