This is the Traxxas Revo 3.3 ProGraphix Body with Decals. The graphics are pre-printed requiring only the final paint color application to produce a stunning finished body!FitsRevo 3.3Requires: Final paint color applicationSpecificationsLength: 19-1/2"...

This is the Traxxas Revo 3.3 Idler Gear with Bearing and Gear Support.FeaturesSteel idler gear constructionPlastic idler gear support constructionIdler gear bearing pre-installedIncludesOne idler gearOne idler gear supportOne 5X10mm ball bearing

These are the Traxxas Gemini Black Chrome 3.8" Wheels with 17mm Splined Hex Hubs. These fit tires with a 3.8" Traxxas style bead.Fits these vehicles when using 17mm splined hexes1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitE-MaxxE-Maxx...

This is the Traxxas 3x30mm Steering Linkage and Rod End Set for the Traxxas Slayer ProIncludesTwo 3x30mm steel turnbucklesFour short rod endsFour hollow ballsFitsSlayer Pro

This is the Traxxas 3x50mm Linkage Set and Rod Ends for Revo 3.3, E-Revo, Summit, and Slayer trucksIncludesTwo 3x50mm steel turnbucklesFour short rod endsFour hollow ballsFits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitRevo 3.3SlayerSlayer Pro

This is the Traxxas Left-Side Electronics Box and Cover for the Revo 3.3 and Slayer trucks.Fits:Revo 3.3SlayerSlayer Pro

This is the Traxxas 90-Degree Pressure Fitting for Engine Exhaust Pipe Pressure.FitsNitro 4-TecNitro RustlerNitro SlashT-Maxx 2.5

This is the Traxxas Nitro Slash Air Filter Body and Foam Filter with filter support, cap, air filter base, wire mount, and hardware.Fits:Nitro Slash

This is the Traxxas TRX 2.5 & 3.3 Low-Speed Needle with 2x1mm O-rings (2). This works in Traxxas 2.5 and 3.3 engines.For use with TRX 2.5 & 3.3 engines used in:Nitro 4-TecNitro RustlerNitro SlashJato 2.5 & 3.3Revo 2.5 & 3.3T-Maxx 2.5 & 3.3

This is a set of replacement Traxxas Engine Ball Bearings for the TRX 3.3, 2.5R, and 2.5 Engines. This includes one 7x17x5mm and one 12x21x5mm engine bearing. These engines have been used in many of the Traxxas nitro vehicles.SpecificationsFront...

This is a pair of Traxxas 20x27x4mm Rubber Sealed Ball Bearings (2). These are used on the 1/10 Traxxas Summit.FeaturesSteel ConstructionRubber SealedIncludes: Two Ball BearingsSpecificationsOuter Diameter: 27mm (1.06")Inner Diameter: 20mm (0.79")Width:...

This is a pair of Traxxas SS Split Spoke Chrome 3.8" Wheels with 14mm hexes, for use on T-Maxx, E-Maxx, E-Revo, and Summit trucks with 14mm hex hubs.Features Ten spoke chrome finish plastic construction Spokes are in groups of...

This is package of six Traxxas 2.5x18mm Screw Pins. These are used in vehicles like the 1/10 E-Revo, Revo 3.3, Slayer, and XO-1.Includes: (6) 2.5 X 18mm screw pinsSpecificationsLength (overall): 19mm (3/4")Length (threads): 5mm ...

This is the Traxxas Transmission Input Shaft with 18-Tooth Steel Drive Gear Assembly for the 1/10 E-Revo, E-Maxx, and 1/10 Summit trucks.SpecificationsShaft Diameter: 5mmShaft Length: 3.53" (90mm)Thread Size: 4mm Fits1/10 E-Revo Brushed1/10 E-Revo...

This is a pair of Traxxas Gearbox Halves and Hardware for the E-Maxx, E-Maxx Brushless, and 1/10 Summit trucks.

These are the Traxxas 33-Tooth Output Gears, Drive Dog Carrier, and Output Shaft Spacer for the 1/10 E-Revo, Summit, and E-Maxx trucks.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitE-MaxxE-Maxx Brushless

This is the Traxxas Steel 1st Speed 13-Tooth Idler Gear for the 1/10 E-Revo, Summit, and E-Maxx trucks.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitE-MaxxE-Maxx Brushless

This is the Traxxas Transmission Output Shaft for use with the 1/10 E-Revo, E-Maxx, and Summit trucks.SpecificationsOverall length: 2.75" (70mm)Diameter of drive dog mount: .39" (10mm)Diameter of shaft: .23" (6mm) Fits1/10 E-Revo Brushed1/10 E-Revo...

This is the Traxxas E-Maxx Steering Servo Horn and Steering Link Set. This fits the E-Maxx and E-Maxx Brushless trucks.Includes2x steering servo horns1x 3x12mm threaded rod steering link with rod ends and hollow balls

This is a set of six Traxxas 3x10mm Shoulder Screws with Threadlock.SpecificationsOverall Length: 12mm (.47")Length, bottom of head to end of screw: 10mm (.39")Shoulder Length: 6mm (.24")Shoulder...

This is a set of six Traxxas 3x32mm Cap-Head Hex Machine Screws.FeaturesBlack finishSteel constructionCap head designSpecificationsLength: 1.260" (32mm)Diameter: .119" ( 3mm)MM Pitch: .5 coarse Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10...

This is pack of six Traxxas 3x28mm Cap-Head Hex Machine Screws and Lock Washers.Includes:(6) 3X28mm cap head screws(6) lock washers(6) washers(6) split washersSpecificationsLength: 1-1/8" (28mm)Diameter: 1/8" (3mm) Fits1/10...

This is a package of Traxxas 3x25mm Grub/Set Screws and 3mm Nylon Locknuts. This includes 8 set screws and 8 locknuts.FeaturesBlack metal 3x25mm grub screwsSilver metal 3mm locknuts with nylon insertsIncludesEight 3x25mm Grub ScrewsEight 3mm Locknuts ...

This is the Traxxas Steering Drag Link 4x72mm Turnbuckle with Rod Ends and Hollow Balls for the E-Maxx 16.8V and E-Maxx Brushless trucks.SpecificationsLength: 3.93" (100mm)Shaft diameter: .15" (4mm)

This is a package of six Traxxas 4x16mm Button-Head Hex Machine Screws.Replacement part for these modelsMaxxRevoSlayer Pro 4X4SledgeSummitTRX-4 1972 Chevrolet Blazer High Trail EditionTRX-4 1979 Chevrolet BlazerTRX-4 1979 Ford BroncoTRX-4 Chevrolet K10...

This is the Traxxas Waterproof Receiver Box Seal Kit, which includes the o-ring, seals, and silicone grease. This fits the waterproof receiver box on the E-Maxx, E-Maxx Brushless, Slash 4x4 trucks, and Blast boats.FitsBlastE-MaxxE-Maxx BrushlessSlash...

This is the Traxxas Blue Aluminum 49mm Rear Turnbuckle Camber Link, assembled with rod ends & hollow balls. Search our store for part 3741A for a complete camber link set.Fits1/10 Monster Jam TrucksBigfootCraniacRustler VXLRustler XL-5SkullyStampede VXL...

This is the Traxxas Red Aluminum 49mm Rear Turnbuckle Camber Link, assembled with rod ends & hollow balls. Search our store for part 3741X for a complete camber link set.Fits1/10 Monster Jam TrucksBigfootCraniacRustler VXLRustler XL-5SkullyStampede VXL...

This is a pair of Traxxas Toe-Link Turnbuckles (61mm turnbuckle, 96mm to centers of mounting holes) for the Traxxas Stampede 2WD trucks.FeaturesMetal and Nylon ConstructionSilver and Black in ColorAssembled w/Rod EndsIncludesTwo 61mm (96mm center to...

These are Traxxas 3x15mm Washerhead Self-Tapping Screws. Each package includes six screws.Fits1/10 Monster Jam TrucksBandit XL-5CraniacSkullyStampede XL-5 2WD

These are Traxxas 3x12mm Washerhead Self-Tapping Screws. These come in a package of six screws.Fits1/10 Monster Jam TrucksBandit XL-5CraniacSkullyStampede XL-5 2WD

This is the Traxxas 2.5x14mm Cap-Head Hex Drive Machine Screws (6). Includes: Six 2.5x14mm Button Head Machine Screws Replacement part for these modelsX-MaxxXRT

These are the Traxxas X-Long Chrome Steel Shock Shafts. Each package includes two shock shafts.For use with X-Long shocks on:1/10 Monster Jam Trucks1/10 RallyBandit VXLBandit XL-5CraniacNitro RustlerNitro SlashNitro SportNitro StampedeRustler VXLRustler...

These are the Traxxas 3x8mm Roundhead Self-Tapping Screws. Each package includes six screws.FitsNitro Slash

These are the Traxxas 2x6mm Roundhead Self-Tapping Screws. Each package includes six screws.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitJato 2.5Jato 3.3Revo 3.3SlayerSlayer Pro

These are the Traxxas 3x12mm Countersunk Self-Tapping Screws. Each package includes six screws.Fits1/10 Monster Jam TrucksBandit XL-5CraniacSkullyStampede XL-5 2WD

These are the Traxxas 4x30mm Button-Head Hex Drive Machine Screws (6). 4x30 mm button-head machine screws with hex drive heads. Set of six. Includes: Six 4x30mm Button Head Machine Screws Replacement part for these modelsX-MaxxXRT

This is the Traxxas 4x35mm Button-Head Machine Screws (6) (Hex Drive). 4x35 mm button-head machine screws with hex drive heads. Set of six. Replacement part for these modelsMaxxSledgeUnlimited Desert RacerX-MaxxXRT

These are the Traxxas 3x14mm Button-Head Hex Drive Machine Screws (6). These are used on the X-Maxx trucks. 3x14 mm button-head machine screws with hex drive heads. Set of six.Includes: Six 3x14mm Button Head Machine Screws Replacement Part For4-Tec 2.0...

These are the Traxxas 3x20mm Countersunk Machine Screws. Each pack includes six screws.FitsNitro Slash