This is the Traxxas Bumper, rear/ brace, rear. This is Traxxas part number 5936Part Number: 5936 / TRA5936FitsSlayerSlayer ProMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have any questions.

This is the Traxxas Bumper, front/ bumper mount, front. This is Traxxas part number 5935Part Number: 5935 / TRA5935FitsSlayerSlayer ProMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have any...

This is the Traxxas Suspension arm upper (1)/ suspension arm lower (1) (left rear) (fits Slayer Pro 4x4). This is Traxxas part number 5934XPart Number: 5934X / TRA5934XFitsSlayer ProMore detail coming soon! Please check your vehicle manual to confirm...

This is the Traxxas Suspension arm upper (1)/ suspension arm lower (1) (left front) (fits Slayer Pro 4x4). This is Traxxas part number 5932XPart Number: 5932X / TRA5932XFitsSlayer ProMore detail coming soon! Please check your vehicle manual to confirm...

This is the Traxxas Suspension arm upper (1)/ suspension arm lower (1) (right front) (fits Slayer Pro 4x4). This is Traxxas part number 5931XPart Number: 5931X / TRA5931XFitsSlayer ProMore detail coming soon! Please check your vehicle manual to confirm...

This is the Traxxas Push rod (aluminum) (assembled with rod ends) (2) (use with progressive-2 rockers).  Precision-machined pushrods are made from super-strong 7075-T6 aluminum to shave grams and add style with their vivid red-anodized finish and...

This is the Traxxas Tires, off-road racing, SCT dual profile 4.3x1.7- 2.2/3.0' (2)/ foam inserts (2). This is Traxxas part number 5871Part Number: 5871 / TRA5871FitsNitro SlashSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD VXL (low CG)Slash 2WD...

This is the Traxxas Springs, rear (white) (progressive rate) (2). This is Traxxas part number 5858Part Number: 5858 / TRA5858FitsNitro SlashSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD VXL (low CG)Slash 2WD XL-5More detail coming soon! Please...

This is the Traxxas Chassis, low CG (grey). This is Traxxas part number 5832GPart Number: 5832G / TRA5832GFitsSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD VXL (low CG)Slash 2WD XL-5More detail coming soon! Please check your vehicle manual to...

This is the Traxxas Chassis, low CG (blue). This is Traxxas part number 5832APart Number: 5832A / TRA5832AFitsSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD VXL (low CG)Slash 2WD XL-5More detail coming soon! Please check your vehicle manual to...

This is the Traxxas Motor Water Cooling Jacket. The water cooling motor jacket circulates water around the motor can to keep down temperatures. Fits Velineon 540 brushless marine motor Replacement Part ForDCB M41 WidebodySpartan SRSpartan

This is the Traxxas 1/10 E-Revo Two-Speed Conversion Kit with Shifting Servo. Make your E-Revo even more versatile with super-low gearing for climbing, while still maintaining speed for all-around bashing! This conversion requires a 3-channel radio...

This is the Traxxas 1/10 Summit Differential Carrier, Fork, Linkage Arms, Gaskets and Hardware.IncludesOne Heavy Duty Differential CarrierOne Front and Rear Linkage ArmOne Differential ForkTwo X-Ring GasketsOne Ring Gear GasketTwo BushingsOne 6.5x10x0...

This is the Traxxas 1/10 Summit Front/Rear Differential Housing. This can be used on the front or rear of the Summit.Includes: One diff housingFits1/10 Summit

This is the Traxxas 1/10 Summit Locking Differential Output Gear and Slider with Pin.IncludesOne Locking DifferentialOutput GearOne Differential SliderOne 3x12mm ScrewpinFits1/10 Summit

This is the Traxxas 1/10 E-Revo and Summit Single Motor Gear Cover for Single Motor Installations. This must be used with motor plate part number TRA5690X.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Summit

This is the Traxxas 1/10 Summit Locking Diff Servo Horn with Built-In Spring and Hardware.Includes: One Servo Horn with Built-in Spring and HardwareFits1/10 Summit

This is the Traxxas Shift Linkage Set for 1/10 Summit and E-Revo trucks.IncludesOne Ball CollarOne SpringOne Ball CupOne Servo HornOne Linkage WireOne Shift Servo MountTwo 3x8mm screws Fits1/10 E-Revo...

This is a pair of Traxxas Red Beadlock Style Sidewall Protector with Screws for use with Traxxas Geode 3.8" Wheels.Includes:Two Red Sidewall ProtectorsTwenty Four 2x6mm ScrewsSpecificationsInner Diameter: 3.1" (79mm)Outer Diameter: 3.9" (100mm)Fits...

This is a set of Traxxas Center Half Shafts for 1/10 E-Revo, Summit, and E-Maxx trucks.Includes:Three internal splined shaftsTwo external splined shaftsFits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitE-MaxxE-Maxx BrushlessMore detail coming soon!...

This is the Traxxas 1/10 Summit Rear Bumper with Mount and Screws.Fits1/10 SummitMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have any questions.

This is a set of Traxxas 1/10 Summit Front Bulkhead Left & Right Halves.Fits1/10 Summit

These are the Traxxas 1/10 E-Revo and Summit Front and Rear Battery Door Retainer Clips with a Foam Spacer.IncludesBattery Retainer ClipFront ClipRear ClipFoam SpacerInstruction sheet Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Summit

This is the Traxxas 1/10 Summit and E-Revo Chassis with Foam Pad. This can be used on the Summit, E-Revo Brushed, and E-Revo Brushless trucks.FeaturesNylon constructionInstalled foam padsGrey in colorIncludes: One Chassis with foam pads,...

This is the Traxxas 1/10 Summit ExoCage with Hardware. This includes all parts and hardware to complete one roll cage.Fits1/10 Summit

This is the Traxxas Jato 61mm Red Aluminum Turnbuckle Front Toe Link with Rod Ends and Hollow Balls.FeaturesRed anodized aluminum constructionBlack pre-attached ball linksIncludes: One aluminum link ...

This is the Traxxas Jato 58mm Red Aluminum Turnbuckle Camber Link with Rod Ends and Hollow Balls.FeaturesRed anodized aluminum constructionBlack pre-attached ball linksIncludes: One aluminum linkSpecificationsLength: 3.8" (96mm)Diameter: 0.16"...

This is the Traxxas Jato 2.5 and 3.3 Wheelie Bar/Rear Skid Plate Assembly.FitsJato 2.5Jato 3.3

This is a pair of Traxxas Black Chrome All Star 2.8" Wheels for use on the front of Traxxas 2WD Nitro vehicles such as the Jato, Nitro Rustler, and Nitro Stampede.SpecificationsOverall Diameter: 2.8" (71mm)Width: 1.92" (49mm)Axle Diameter: 7mm (0...

This is a pair of Traxxas Ribbed 2.8" Tires and Twin Spoke Chrome Wheels for use on the front of nitro vehicles like the Jato, Nitro Rustler, Nitro Sport, and Nitro Stampede.FitsJatoNitro RustlerNitro SportNitro StampedeMore detail coming soon! Please...

This is a pair of Traxxas Alias 2.8" Tires Pre-Mounted on Twin Spoke Wheels for use on the rear of Traxxas 2WD nitro trucks such as the Jato, Nitro Rustler, Nitro Sport, and Nitro Stampede.FeaturesChrome twin spoke wheelsAlias 2.8" tires pre-mounted and...

This is a pair of Traxxas Ribbed 2.8" Front Tires and Foam Inserts for use on 2.8" Traxxas-bead wheels.IncludesTwo Shredder front 2.8" tiresTwo foam insertsSpecificationsWidth: 2" (50mm)Inner Diameter: 2.8"(71.12mm)Outer Diameter: 3.6"...

This is the Traxxas Front Sway Bar Linkage Set for 1/10 E-Revo, Revo 3.3, and Slayer Pro trucks.Includes:Two 3x70mm assembled front turnbuckles with rod ends, hollow balls and ball studs Fits1/10 E-Revo Brushed1/10 E-Revo BrushlessRevo 3...

This is a pair of Traxxas Stainless Steel GTR Shock Shafts for use with the Traxxas 5460-series GTR Shocks. The 5460-series GTR shocks are the shocks available for the Jato, Revo 3.3, E-Revo, Summit, Slayer, and XO-1 vehicles.SpecificationsLength: 1.8"...

This is the Traxxas Red Aluminum GTR Shock Set for Jato, Revo, E-Revo, Summit, Slayer, and XO-1 vehicles. Shock oil is included. Springs are sold separately.Features Machined threaded aluminum body with oversized spring collar for ...

This is the Traxxas Front and Rear Center Half Shaft Set for Revo 3.3 and Slayer trucks.FitsRevo 3.3SlayerCheck your vehicle manual to make sure this part fits your specific model.

This is a pair of Traxxas Steel Stub Axles for 1/10 E-Revo, Revo 3.3, E-Maxx, T-Maxx 3.3, and Slayer trucks. These are stock replacement axles.Includes: Two stub axlesFits1/10 E-Revo Brushed1/10 E-Revo BrushlessE-MaxxE-Maxx BrushlessRevo 3.3SlayerSlayer...

This is the Traxxas Revo 3.3 Shift Linkage Set with ball collar, spring, ball cup, servo horn, and linkage wire.FitsRevo 3.3

This is the Traxxas Transmission Shift Fork and Shaft for Revo 3.3 and T-Maxx 3.3 trucks with reverse.FitsRevo 3.3T-Maxx 2.5RT-Maxx 3.3 (with reverse)

This is the Traxxas Revo 3.3 ProGraphix Body with Decals. The graphics are pre-printed requiring only the final paint color application to produce a stunning finished body!FitsRevo 3.3Requires: Final paint color applicationSpecificationsLength: 19-1/2"...