This is a pair of Traxxas TRX-4 Crawler 12mm Hex Wheel Hubs with Stub Axle Pins. This includes two hex hubs, two pins, and two screw pins.Stock Replacement OnTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land Rover DefenderTRX-4 Tactical

These are the Traxxas TRX-4 Crawler Portal Drive Caster Blocks and Kingpin Bushings. This includes two castor blocks and four kingpin bushings.FitsTRX-4

This is the Hot Racing Stainless Steel Conical Prop Nut for the Traxxas Spartan, Spartan SR and DCB M41 Catamaran Boats.FEATURES:- CNC machined stainless steel construction- Replaces factory hex nut with hydrodynamically efficient conical nut for reduced...

This is the Hot Racing Short 13-Tooth 32-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit a wide variety of vehicles, including the Traxxas 1/10 E-Revo, E-Maxx, 1/10 Rally, Slash 4x4, and Stampede 4x4 XL-5, and Stampede 4x4 VXL trucks...

This is a Banana Plug to EC5 Connector Charging Adapter Lead. This allows for charging a battery equipped with the EC5 plug from a charger with banana output jacks.

This is the Traxxas Aton Rotor Blade Set (2) (White) w/Screws. This is Traxxas part number 7927Part Number: 7927 / TRA7927FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have...

These are the Traxxas X-Maxx Battery Hold-Down Mounts with ScrewsFeatures:Molded composite plastic constructionFastens to chassis top brace and holds battery hold downs in placeIncludes:Four Battery Hold Down Mount SectionsFour 3x18mm Cap Screws

This is the Traxxas Tires & wheels, assembled, glued (12-spoke red chrome wheels, slick tires) (2). Give your LaTrax Rally a new set of treads with these pre-glued wheels and tires. Slick racing tires come pre-mounted to 12-spoke wheels so they're...

This is the Traxxas Tires & wheels, assembled, glued (12-spoke blue chrome wheels, slick tires) (2). Give your LaTrax Rally a new set of treads with these pre-glued wheels and tires. Slick racing tires come pre-mounted to 12-spoke wheels so they're...

This is the Traxxas Tires & wheels, assembled, glued (12-spoke black chrome wheels, slick tires) (2). Give your LaTrax Rally a new set of treads with these pre-glued wheels and tires. Slick racing tires come pre-mounted to 12-spoke wheels so they're...

This is the Traxxas Tires & wheels, assembled, glued (12-spoke chrome wheels, slick tires) (2). Give your LaTrax Rally a new set of treads with these pre-glued wheels and tires. Slick racing tires come pre-mounted to 12-spoke wheels so they're ready...

This is the Traxxas Tires, slick (2). Set of two slick tires. Fits: Front or Rear. Replacement Part For1/18 LaTrax Rally1/18 LaTrax Rally VR46

This is the Traxxas Motor Plate This brightly-anodized aluminum motor plate keeps your motor tight during intense high-flying action with a touch of style. Replacement Part ForFord Fiesta ST RallyFord Fiesta ST Rally BrushlessFord Fiesta ST RallyJato 4X4...

This is the Traxxas Push rods, aluminum (red-anodized) (4) (assembled with rod ends). This is Traxxas part number 7118XPart Number: 7118X / TRA7118XFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Grave Digger1/16 SummitMore detail coming soon!...

This is the Traxxas Lower chassis, low CG (blue). This is Traxxas part number 5831APart Number: 5831A / TRA5831AFitsSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD VXL (low CG)Slash 2WD XL-5More detail coming soon! Please check your vehicle manual...

This is the Traxxas Spartan Rudder Pushrod, Servo Horn and Hardware.Includes:Rudder pushrodServo horn3x18mm buttonhead cap screw3x15mm cap screw3x6mm cap screw3mm locknut FitsSpartan

This is the Traxxas Spartan Radio Tray, Retainer, Stuffing Tube Clamp and Hardware.IncludesOne radio trayTwo radio tray retainersOne stuffing tube clampTwo 4x16mm stainless steel buttonhead cap screwsTwo 4x10mm stainless steel buttonhead cap...

This is a pair of Traxxas Talon Tires with Foam Inserts, Pre-Mounted on 3.8" Chrome Wheels with 17mm Splined Hex Hubs. These can be used on 1/10 E-Revos, Revo 3.3, E-Maxx, T-Maxx, and Summit trucks using 17mm Splined Hexes.Features Plastic chrome...

This is a pair of Traxxas 15x24x5mm Blue Rubber-Sealed Ball Bearings.Features Steel construction with blue rubber seals Used in the front and rear differentials of the X-Maxx Includes: Two 15 x 24 x 5mm Blue Rubber Sealed Ball...

This is a set of Traxxas 3x30mm Cap-Head Shoulder Screws and Draglink Shoulder Screws for the Bandit, Nitro Slash, Rustler XL-5, and Slash 2WD XL-5 trucks.Includes:(2) 3x30mm Bellcrank Screws(2) 3x5mm Draglink ScrewsFitsBandit VXLBandit XL-5Nitro...

These are the Traxxas 3x20mm Roundhead Machine Screws. Each package includes six screws.Fits1/10 Monster Jam TrucksBandit XL-5CraniacNitro SlashSkullyStampede XL-5 2WD

This is a pair of Traxxas Tracer 2.2" Black Chrome Rear Wheels for the Traxxas Bandit XL-5 and VXL buggies. These wheels have a slot in the hub to slide over the axle pin.FEATURES:Black Chrome 5-spoke designFits standard 2.2" truck tiresINCLUDES: Two...

This is the RPM Red Axle Carriers for the Traxxas 1/16 E-Revo, 1/16 Slash, and 1/16 Summit. This fits brushed and VXL brushless versions.There is very little that can be as frustrating on an R/C vehicle as slop in the suspension system. In the case of...

These are Traxxas 4x8x3mm Sealed Ball Bearings (2). These are used in 1/16 vehicles such as the E-Revo and Slash, as well as many other Traxxas vehicles. Features:Blue rubber sealedMay also be used in any vehicle where this size bearing is...

This is a Team Integy Aluminum Motor Heatsink with Cooling Fan (Purple) for the Traxxas Slash 2WD, Stampede 2WD, Rustler and Bandit vehicles. This will only fit XL-5 versions.Heat is the enemy, especially when it comes to electric motors. Keep your...

This is the E-flite 30-Amp Pro V2 Switch-mode BEC Brushless ESC. This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a...

This is the Blade Rotor Head Linkage Set (4) for the Blade Nano CP X helicopter (nCP X)

This is the Temperature and Voltage Sensor for the XO-1 On-Road Car from TraxxasFeaturesFunctions with the Traxxas TQi Link system to display battery voltage and temperature.IncludesTemperature and Voltage Sensor with Zip Tie.

This is the Blade mCP X Helicopter Main Rotor Hub with Hardware

These are the Traxxas Front and Rear Toe Links for use on the 1/16 Slash and E-Revo vehicles. Features: Nylon construction Red in color Includes:Two Front and two Rear Toe LinksEight Hollow Balls Specifications:Length: 67mm (2.6")Diameter: 5mm (0...

These are the Traxxas Pushrods for use on the 1/16 Slash VXL 4WD. Features: Nylon construction Red in color Includes:Four PushrodsEight Hollow Balls Specifications:Length: 55mm (2.2")Diameter: 5.2mm (0.20")

These are Traxxas 2.5x8mm Cap Head Screws (6). Features: Steel construction Black in color Cap head design Includes: (6) 2.5x8mm cap head screws Specifications:Length: 5/16" (8mm)Diameter: 3/32" (2.5mm)

This is the Traxxas 27mHz Two Channel AM Receiver without BEC. 2-channel 27MHz receiver without BEC (for use with electronic speed control) Features: Mounting tabs on either side insure secure attachment to chassis. Includes: One Two Channel...

This is the Robinson Racing Xtra Hard Steel 18-Tooth Pinion Gear with a 5mm shaft hole.  This is perfect for use on the Traxxas Revo and E-Maxx when running electric motors with a 5mm shaft. Features: Extra hardened steel...

This is the Blade Hardware Set BLH3122 Blade 120SR

This is the E-Flite Feathering Spindle w/ O-rings and Bushings: 120SR

This is the E-Flite Blade Carbon Fiber Main Shaft with Hardware: 120SR

This is the Carrier Differential for the Traxxas Revo and E-Maxx. FEATURES Replaces worn diff carriers gaskets and spacers INCLUDESDiff Carrier and GasketsSteel Spider Gear Braces (not used with Revo)Instruction sheet REQUIRESDisassembly of...

This is a pair of Traxxas 2.8" Black Chrome All Star Wheels mounted with Talon Tires. Talon tires provide "just-right" grip and handling on a wide variety of surfaces. The tires come mounted with foam inserts and pre-glued to tough 2.8″ All-Star...

This is a Package of Replacement Cush-Drive Elements for the EZ Start 2 System. FEATURES:Black plastic construction INCLUDES:Four cush-drive elements REQUIRES:The remainder of the EZ Start 2 system. SPECS:Length: 6mm (0.24")