This is the Traxxas Slipper Tension Spring with Spur Gear Bushing and Locknut.Includes:Slipper tension spring (1)Spur gear bushing (1)4mm Locknut with nylon insert (1) FitsBandit XL-5E-MaxxNitro RustlerNitro SlashNitro SportNitro StampedeRustler...

This is the Traxxas Blue Aluminum 17 mm Splined Wheel Hub Adapters (4) These 17 mm hex adapters make it easy to install a wide range of wheel and tire combinations on your Traxxas vehicle. Installation is simple using the included 5 mm hex wrench. The...

This is the Traxxas Receiver Box Seal Kit for Slash 2WD, E-Revo, and Summit trucksIncludesSilicone rectangle shaped O-ringSilicone greaseTwo sections of foam rubberInstruction sheetFits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitSlash 2WDSlash 2WD...

This is the Robinson Racing Extra Hard 15-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...

These are the Traxxas Maxx Tires with Foam Inserts for 3.8" T-Maxx/E-Maxx/Revo Wheels. These will fit 3.8" wheels with the Traxxas bead.Outside Diameter: 6.3"Includes: Two tires with foam insertsRequires:Installing on 3.8" wheels Replacement part...

This is the RPM Ride Height Gauge. The RPM Ride Height Gauges take the guesswork out of proper ride height adjustments! These gauges have a graduated scale along the upper edge of the base with easy to read lines and numbers. Each graduation on the inch...

This is the RPM Black Center Skid Plate for the Traxxas T-Maxx 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucksFits: T-Maxx 3.3 (4907 & 4908 only - see bottom for version identification), E-Maxx 16.8V, E-Maxx BrushlessRPM designers carefully...

This is a pair of Traxxas GTR Shock Springs (Long .810 Pink) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks. Shock springs for 1/10 scale long GTR shocks use high-quality spring steel with a durable white powder-coated finish. GTR springs...

This is a pair of Traxxas GTR Shock Springs (XX-Long .711 Orange) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks. Shock springs for 1/10 scale XX-long GTR shocks use high-quality spring steel with a durable white powder-coated finish. GTR...

This is Tamiya PS-3 Light Blue Color RC Body Spray Lacquer Paint for Polycarbonate RC Car, Truck, and Buggy Bodies.Features: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. This paint is impervious to oil...

This is the Traxxas Blue Aluminum Rear Shock Tower for the Slash 4x4, 1/10 Rally, Stampede 4x4, and Telluride trucks. Made of precision-machined 7075-T6 aluminum and anodized blue, these look great and are a perfect fit on your vehicle.Includes:...

The E-Flite 40-Amp Lite Pro V2 Brushless ESC with Switch-Mode BEC, and advanced programming, allows you to operate up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage. This is the new E-Flite 40-Amp...

This is the Team Integy Gun Metal Aluminum Heavy Duty Gearbox for use on the Traxxas Slash 2WD, Rustler, and Stampede 2WD vehicles. FEATURES Aluminum constructionGun Metal in color INCLUDESOne Aluminum Heavy Duty Gearbox REQUIRESInstallation on the...

This is a Traxxas Rear Shock Tower for the Slash 4x4 and Stampede 4x4 trucks.FEATURES:Hardened plastic constructionBlack in colorINCLUDES: One rear shock towerREQUIRES: Installation on chassisSPECS:Length: 87.5mm (3.44")Width: 60.5mm (2.38")

This is the Traxxas Driveshaft Rebuild Kit for the Revo, T-Maxx 3.3, and E-Maxx vehicles that have been upgraded with the aftermarket Traxxas steel driveshaft set (part TRA5451R). These are replacement parts for the TRA5451R.Rebuild kit for Revo/Maxx...

This is the Traxxas Bellcrank Bushings (Plastic) set (5x8x2.5mm) (4) Includes: Set of four 5x8x2.5 mm bellcrank bushings

These are the Traxxas Left and Right Axle Carriers for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. Features: Nylon construction Black in color Includes:One Left Axle CarrierOne Right Axle Carrier

This is the Traxxas Front and Rear Skidplate for the Slash. This skidplate bolts to the chassis and the bulkheads and provides protection to the front differential. Features: Skidplate is constructed of high impact molded black plastic Front of...

This is a set of Traxxas Axle Carriers and Steering Blocks for the Traxxas Revo, T-Maxx 3.3, and E-Maxx 3905. The axle carriers and steering blocks support the stub axles and bolt to the upper and lower suspension arms at each wheel...

This is a Traxxas Shock Tower for the all versions of the T-Maxx and E-Maxx. This is for use with rectangular body posts. Features: Plastic construction Includes:(1) Shock Tower Specifications:Width: 4.15" (105.5mm)Height: 2.3" (58.5mm)Thickness: 0...

This is a set of RPM Pillow Ball Screw Caps (4) for use with the RPM Carriers on the Traxxas T-Maxx and E-Maxx trucks. Until now, the only way to replace damaged or worn out pivot ball setscrews and bushing caps was to purchase new pivot balls as well...

This is the Team Integy Heat Shrink Tube 26-Piece Assortment Set. Features: Assorted Colors and Sizes Includes: Twenty Six Heat Shrink Tubes

This is a pair of replacement Toe Links for the Traxxas Revo Truck.  These adjust the position of the toe on the vehicle. FEATURES Steel turnbuckle design 5.0mm diameter INCLUDESTwo front or rear toe links REQUIRESNothing.  These are...

This is the Hitec HS-485HB Standard Deluxe Karbonite Gear BB Universal Servo OverviewHS-485HB updates the very popular HS-475HB by adding more torque and greater speed. With a top ball bearing, heavy duty, high impact Karbonite gears and high performance...

This is an optional RC Screwz Screw Set for the Traxxas Slash FEATURES Stainless steel screws replace all stock screws, locknuts and washers INCLUDESOne Case containing all replacement screws for the Traxxas Slash

This is the Team Integy Evolution-5 Aluminum Servo Guard (Silver) for use on the Traxxas T-Maxx 3.3 (fits models 4907 and 4908). FEATURES Aluminum construction Silver in color INCLUDESOne Evo-5 Servo Guard REQUIRESInstallation on the...

These are the Rear Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx & E-Maxx X FEATURES Constructed of steel, polished natural finish INCLUDESTwo Rear Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx REQUIRESInstalling between wheel hubs and...

These are the Front Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx FEATURES Constructed of steel, polished natural finish INCLUDESTwo Front Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx REQUIRESInstalling between wheel hubs and front...

This is the Excel Extra Hands Double Clip Set with MagnifierFEATURES:Two spring-loaded alligator clips mounted on ball joints to hold parts at any angle, leaving hands free to work on your project.Wing nuts on ball joints for ease of...

These are the Steering Servo Horns and Turnbuckles from Traxxas. FEATURES:Nylon construction, black in color INCLUDES:Two long steering servo hornsTwo short steering servo hornsTwo 3x20mm turnbuckles REQUIRES:Installation on the vehicle

This is the Traxxas #3652 Rear Stub Axle Carrier that comes included with the Bandit XL-5, Rustler XL-5, and Stampede 2WD XL-5 trucks that use bushings instead of bearings. If your truck has bearings, it will require part TRA3752 instead. Please check...

This is the Battery Box for the Traxxas T-Maxx 4WD Radio Control Monster Truck. This battery box mounts to the chassis and protects the battery pack from dirt and moisture. Fits both old and new versions of the T-Maxx. FEATURES:Replaces damaged battery...

These are Aluminum Hex Wheel Hubs for the T-Maxx and E-Maxx Truck Kits. FEATURES:Blue anodized.Machined 6061 T-6 aluminum construction.Packaged in foam, on a bubble sealed header card. INCLUDES:Four Hex Wheel HubsFour 2.5 x 10mm Axle...

These are hardened steel drive yokes for the Traxxas Rustler and Stampede. FEATURES:Hardened steel construction and is stronger than stock parts.These yokes also come with U-Joints pre-installed for ease of installation. INCLUDES:Two hardened steel yokes...

This is the is a pair of Traxxas Steering Blocks for Bandit XL-5 buggies. They are made of black reinforced nylon and are what the front axles go through.PACKAGE INCLUDES: Two steering blocks (one left and one right)

This is the Integy Evolution-4 Aluminum Rear Skid Plate with a Chrome finish for all versions of the Traxxas T-Maxx and E-Maxx.  This is a great addition for extra protection on your Maxx truck, and would look awesome for...

This is a pair of 2.8" Twin-Spoke Rear Wheels for the Traxxas Jato 2.5 and 3.3 trucks.  These are stock replacement wheels.FEATURES: Nylon constructionChrome platedFive split spoke wheel patternUses 12mm hex adapterINCLUDES: Two Rear Chrome Wheels

This is a Traxxas Jato 2.5 and 3.3 Fuel Tank Cap, Pull Ring, and Fuel Line Pinch Clip.

This is a Traxxas Jato 2.5 and 3.3 Stock Replacement Front Shock Tower.

This is a set of two (2) Traxxas Jato Rear GTR Shock Springs with the 1.6 Blue Weight Rating.