This is a Traxxas Rear Shock Tower for the Slash 4x4 and Stampede 4x4 trucks.FEATURES:Hardened plastic constructionBlack in colorINCLUDES: One rear shock towerREQUIRES: Installation on chassisSPECS:Length: 87.5mm (3.44")Width: 60.5mm (2.38")

This is the Traxxas Driveshaft Rebuild Kit for the Revo, T-Maxx 3.3, and E-Maxx vehicles that have been upgraded with the aftermarket Traxxas steel driveshaft set (part TRA5451R). These are replacement parts for the TRA5451R.Rebuild kit for Revo/Maxx...

This is the Traxxas Bellcrank Bushings (Plastic) set (5x8x2.5mm) (4) Includes: Set of four 5x8x2.5 mm bellcrank bushings

These are the Traxxas Left and Right Axle Carriers for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. Features: Nylon construction Black in color Includes:One Left Axle CarrierOne Right Axle Carrier

This is the Traxxas Front and Rear Skidplate for the Slash. This skidplate bolts to the chassis and the bulkheads and provides protection to the front differential. Features: Skidplate is constructed of high impact molded black plastic Front of...

This is a set of Traxxas Axle Carriers and Steering Blocks for the Traxxas Revo, T-Maxx 3.3, and E-Maxx 3905. The axle carriers and steering blocks support the stub axles and bolt to the upper and lower suspension arms at each wheel...

This is a Traxxas Shock Tower for the all versions of the T-Maxx and E-Maxx. This is for use with rectangular body posts. Features: Plastic construction Includes:(1) Shock Tower Specifications:Width: 4.15" (105.5mm)Height: 2.3" (58.5mm)Thickness: 0...

This is a set of RPM Pillow Ball Screw Caps (4) for use with the RPM Carriers on the Traxxas T-Maxx and E-Maxx trucks. Until now, the only way to replace damaged or worn out pivot ball setscrews and bushing caps was to purchase new pivot balls as well...

This is the Team Integy Heat Shrink Tube 26-Piece Assortment Set. Features: Assorted Colors and Sizes Includes: Twenty Six Heat Shrink Tubes

This is a pair of replacement Toe Links for the Traxxas Revo Truck.  These adjust the position of the toe on the vehicle. FEATURES Steel turnbuckle design 5.0mm diameter INCLUDESTwo front or rear toe links REQUIRESNothing.  These are...

This is the Hitec HS-485HB Standard Deluxe Karbonite Gear BB Universal Servo OverviewHS-485HB updates the very popular HS-475HB by adding more torque and greater speed. With a top ball bearing, heavy duty, high impact Karbonite gears and high performance...

This is an optional RC Screwz Screw Set for the Traxxas Slash FEATURES Stainless steel screws replace all stock screws, locknuts and washers INCLUDESOne Case containing all replacement screws for the Traxxas Slash

This is the Team Integy Evolution-5 Aluminum Servo Guard (Silver) for use on the Traxxas T-Maxx 3.3 (fits models 4907 and 4908). FEATURES Aluminum construction Silver in color INCLUDESOne Evo-5 Servo Guard REQUIRESInstallation on the...

These are the Rear Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx & E-Maxx X FEATURES Constructed of steel, polished natural finish INCLUDESTwo Rear Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx REQUIRESInstalling between wheel hubs and...

These are the Front Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx FEATURES Constructed of steel, polished natural finish INCLUDESTwo Front Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx REQUIRESInstalling between wheel hubs and front...

This is the Excel Extra Hands Double Clip Set with MagnifierFEATURES:Two spring-loaded alligator clips mounted on ball joints to hold parts at any angle, leaving hands free to work on your project.Wing nuts on ball joints for ease of...

These are the Steering Servo Horns and Turnbuckles from Traxxas. FEATURES:Nylon construction, black in color INCLUDES:Two long steering servo hornsTwo short steering servo hornsTwo 3x20mm turnbuckles REQUIRES:Installation on the vehicle

This is the Traxxas #3652 Rear Stub Axle Carrier that comes included with the Bandit XL-5, Rustler XL-5, and Stampede 2WD XL-5 trucks that use bushings instead of bearings. If your truck has bearings, it will require part TRA3752 instead. Please check...

This is the Battery Box for the Traxxas T-Maxx 4WD Radio Control Monster Truck. This battery box mounts to the chassis and protects the battery pack from dirt and moisture. Fits both old and new versions of the T-Maxx. FEATURES:Replaces damaged battery...

These are Aluminum Hex Wheel Hubs for the T-Maxx and E-Maxx Truck Kits. FEATURES:Blue anodized.Machined 6061 T-6 aluminum construction.Packaged in foam, on a bubble sealed header card. INCLUDES:Four Hex Wheel HubsFour 2.5 x 10mm Axle...

These are hardened steel drive yokes for the Traxxas Rustler and Stampede. FEATURES:Hardened steel construction and is stronger than stock parts.These yokes also come with U-Joints pre-installed for ease of installation. INCLUDES:Two hardened steel yokes...

This is the is a pair of Traxxas Steering Blocks for Bandit XL-5 buggies. They are made of black reinforced nylon and are what the front axles go through.PACKAGE INCLUDES: Two steering blocks (one left and one right)

This is the Integy Evolution-4 Aluminum Rear Skid Plate with a Chrome finish for all versions of the Traxxas T-Maxx and E-Maxx.  This is a great addition for extra protection on your Maxx truck, and would look awesome for...

This is a pair of 2.8" Twin-Spoke Rear Wheels for the Traxxas Jato 2.5 and 3.3 trucks.  These are stock replacement wheels.FEATURES: Nylon constructionChrome platedFive split spoke wheel patternUses 12mm hex adapterINCLUDES: Two Rear Chrome Wheels

This is a Traxxas Jato 2.5 and 3.3 Fuel Tank Cap, Pull Ring, and Fuel Line Pinch Clip.

This is a Traxxas Jato 2.5 and 3.3 Stock Replacement Front Shock Tower.

This is a set of two (2) Traxxas Jato Rear GTR Shock Springs with the 1.6 Blue Weight Rating.

This is the Team Integy Blue Aluminum High-Flow Aluminum Air Filter for the Traxxas Revo 2.5 and 3.3 trucks.  This looks great, and gives your truck a whole new style. FEATURESHousing constructed of aluminum, blue in colorTwo replaceble filter...

This is the Integy Heavy-Duty Silver Aluminum Rear Bumper for the Traxxas T-Maxx and E-Maxx trucks. It will fit all versions of both the E-Maxx and T-Maxx. This heavy-duty bumper looks awesome, and it is very strong. It looks great on show trucks, but...

This is an Integy 5/64" Replacement Tip for the Team Integy Ti-Nitride Hex Wrench Set.  This is an inexpensive way to get your tools back in perfect condition again. FEATURES Hex wrench tips have a high degree of tolerance to lock screws into...

This is a pair of 5.9 rate (blue) Shock Springs for the Traxxas Revo. FEATURES:Red in color (small blue square indicates spring type)Metal construction INCLUDES:2 springs REQUIRES:Installation on the...

This is a 4.9 Silver (light) Rate Shock Spring for the Traxxas Revo. FEATURES:Steel constructionPainted red w/small silver stripe4.9 tension rate (Light) INCLUDES:Two Shock Springs REQUIRES:Assembly to vehicle SPECS:Static Length:  50mm (1.77")Wire...

This is the Fuel Tank Rebuilt Kit for the REVO from Traxxas. FEATURES:Rubber, slicone, plastic, & nylon construction INCLUDES:Mounting post (1)Grommets (2)Tank gaurd (1)Mounting clips (2)O-ring for cap (1)Pull ring for cap (1)Mounting screws (4)

This is a Traxxas Progressive 1 Rocker Arm Set for the Revo 2.5 and 3.3 trucks.  These fit TRA5318 and TRA5318X pushrods.  If you need the pushrods too, search our store for the listed part numbers.

This is the Clutch Bell with Washer and E-Clip for the Traxxas Revo. FEATURES:Metal constructionFive cooling holes on the face of bell (bellow the teeth) INCLUDES:One clutch bellTwo teflon washerTwo e-clip REQUIRES:This clutch bell uses 5X11 bearings...

This is a Traxxas T-Maxx Brake Pad Set for the T-Maxx .15 and 2.5 trucks.  These are stock replacements.  These brake pads fit on each side of the brake disc and bolt to the rear of the transmission. FEATURES:Replaces missing or worn...

This is the Hangar 9 4-40 Double HD Ball Link (2) Features Ideal for high-stress 1/4 scale/giant scale models strong and durable

This is the Traxxas XRT Ultimate ProGraphix Body From mild to wild, choose your own colors to personalize your XRT clipless body. The detailed graphics are fully painted, but the rest of the body is clear, so you can choose your own main body color...

This is the Traxxas Jato 4x4 Front and Rear Skid Plates Skid plates (front & rear) Replacement Part ForJato 4x4 (90154-4)Jato 4x4 VXL (90386-4)

This is the RC Screwz Traxxas Slash 4x4 Ultimate (68277-4) Stainless Steel Screw Kit. RCScrewZ Stainless Screw Kits are the best way to beef up the hardware throughout your RC vehicle in one convenient package. Your new kit will include everything needed...