This is the Savox SW-0241MG Waterproof 1/5 Scale Digital Servo with Soft Start, 0.17sec / 555oz @ 7.4V The SW-0241MG is a waterproof, large scale, and digital servo. It is metal-geared with an amazing amount of torque while capable of operating on high...

This is the Traxxas Velineon VXL-4s High Output Waterproof Brushless Electronic (Fwd/Rev/Brake) Speed Control ESC - OPEN BOX/ITEM *The factory packaging has been opened but the part has not been used.  The part will be secured properly for shipping...

This is the RPM Black Rear Bumper Mount for Traxxas XRT The RPM Rear Bumper Mount for the Traxxas XRT adds durability by replacing a commonly brokenstock part. How did RPM make it stronger? They started by increasing the height of the mount significantly...

This is the Traxxas Disruptor Rudder Mount, Steering Arm, Drive Strut Mount and Hull Water Outlet with Hardware Replacement rudder mount, steering arm, drive strut mount, and hull water outlet. Includes mounting hardware Replacement Part ForDisruptor

This is the Traxxas Spartan SR 6.5x10x0.5mm PTFE-coated Washers Set of six 6.5x10x0.5 mm PTFE-coated washers. Requires: #10328 and #10385 for complete installation Replacement Part ForSpartan SR

This is the Traxxas Spartan SR Propeller Shaft and Flex Cable Replacement propeller shaft and flex cable Requires: #10328 and #10385 for complete installation Replacement Part ForSpartan SR

This is the Traxxas Spartan SR Drive Strut Replacement blue anodized aluminum drive strut. Requires: #10328 and #10385 for complete installation Replacement Part ForSpartan SR

This is the Traxxas TRX-4MT 1979 Ford F-150 Monster Truck Decal Sheet Replacement body decals for TRX-4MT Ford F-150 monster truck bodies Replacement Part ForTRX-4MT 1/18 1979 Ford F-150 Monster Truck

This is the Traxxas TRX-4MT 1979 Chevrolet K10 Decal Sheet Replacement body decals for TRX-4MT Chevrolet K10 monster truck bodies Replacement Part ForTRX-4MT 1/18 1979 Chevrolet K10 Monster Truck Accessory Part ForTRX-4MT 1/18 1979 Ford F-150 Monster...

This is the Traxxas TRX-4MT Chevrolet K10 Front and Rear Bumper Replacement front and rear chrome bumpers for 9811-series TRX-4M Chevrolet K10 monster truck bodies Fits: #9811 Body Replacement Part ForTRX-4MT 1/18 1979 Chevrolet K10 Monster Truck

This is the Traxxas TRX-4MT Front and Rear Bumper Replacement front and rear chrome bumpers for 9812-series TRX-4MT Ford F-150 monster truck bodies Fits: #9812 Body Replacement Part ForTRX-4MT 1/18 1979 Ford F-150 Monster Truck

This is the Traxxas XRT Rear Lower Bulkhead Replacement XRT rear lower bulkhead Replacement Part ForXRT UltimateXRT

This is the Traxxas 6061-T6 Aluminum (Red-Anodized) Female Center Shafts Give your TRX-4M High Trail vibrant color with these extended 6061-T6 aluminum center shafts. The anodized shafts work with the 9751-series heavy-duty center driveshafts and fit...

This is the Traxxas 6061-T6 Aluminum (Orange-Anodized) Female Center Shafts Give your TRX-4M High Trail vibrant color with these extended 6061-T6 aluminum center shafts. The anodized shafts work with the 9751-series heavy-duty center driveshafts and fit...

This is the Traxxas 6061-T6 Aluminum (Green-Anodized) Female Center Shafts Give your TRX-4M High Trail vibrant color with these extended 6061-T6 aluminum center shafts. The anodized shafts work with the 9751-series heavy-duty center driveshafts and fit...

This is the Traxxas 6061-T6 Aluminum (Dark Titanium-Anodized) Female Center Shafts Give your TRX-4M High Trail vibrant color with these extended 6061-T6 aluminum center shafts. The anodized shafts work with the 9751-series heavy-duty center driveshafts...

This is the Traxxas 6061-T6 Aluminum (Blue-Anodized) Female Center Shafts Give your TRX-4M High Trail vibrant color with these extended 6061-T6 aluminum center shafts. The anodized shafts work with the 9751-series heavy-duty center driveshafts and fit...

This is the Traxxas Half Shaft Set (Left or Right) for #8895 WideMaxx Kit The WideMaxx half shaft set includes four internal-spline shafts and four external-spline shafts to create four telescoping driveshafts (plastic parts only). Must be used with...

This is the Traxxas Clipless Body Mount Latches For #10211 Bodies (4) Set of four clipless body mount latches for 10211-series Maxx Slash bodies Replacement Part ForMaxx Slash

This is the Traxxas Rear (Left & Right) Body Reinforcement Set For #10211 Bodies Left and right rear body reinforcements for 10211-series Maxx Slash bodies Replacement Part ForMaxx Slash

This is the Traxxas Front (Left & Right) Body Reinforcement Set For #10211 Bodies Left and right front body reinforcements for 10211-series Maxx Slash bodies Replacement Part ForMaxx Slash

This is the Traxxas Front Body Mounts (Left & Right) For Clipless Body Mounting Replacement left and right front clipless body mounts Replacement Part ForMaxx Slash

This is the Traxxas Rear Body Mounts (Left & Right) For Clipless Body Mounting Replacement left and right rear body mounts Replacement Part ForMaxx Slash

This is the Traxxas 61-Tooth Spur Gear 61-Tooth spur gear. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your...

This is the GPM Aluminum Front & Rear Sway Bars w/Stainless Steel Links for UDR (Brown) Features: Reduces the tilt when the vehicle turns Includes Front Sway Bar-4pcsStainless Steel Tie Rod-4pcsStainless Steel Round Head Screw 3x16-10pcsStainless...

This is the GPM Aluminum Front Lower Suspension Arms for UDR (Blue) Features: Supports front knuckle arms to increase the stability of the vehicle Includes Suspension Arm-2PCSSST Round Head Screw 3x20-4PCSSST Round Head Screw 3x16-2PCS Replacement Part...

This is the GPM Aluminum Front Upper Suspension Arms for UDR (Blue) Features: Supports front knuckle arms to increase the stability of the vehicle Includes Front Upper Arm-2PCSStainless Steel Pin-23PCSStainless Steel Flat Head Screw 2.5x8-2PCSStainless...

This is the GPM Hardened Steel Front/Rear CVD Joint (+24mm) for X-Maxx 8S (Black) Upgraded to steel #45 to improve the durability Replaces Stock Part #7753 Includes CVD joint - 2pcsGolden metal tube - 2pcs3.5 Steel Pin -2pcs Accessory Part ForX-Maxx

This is the GPM Hardened Steel Front/Rear CVD Joint (+12mm) for X-Maxx 8S (Black) Upgraded to steel #45 to improve the durability IncludesCVD joint - 2pcsGolden metal tube - 2pcs3.5 Steel Pin - 2pcs Accessory Part ForX-Maxx

This is the Pioneer Deep Guide Blade (7mm) and Braids (2) This deeper guide blade is suitable for most modern plastic tracks. Generic, not for Legends Racers. Pioneer Spare Parts keep your car running at its best Includes(1) Deep Guide Blade (7mm)(2)...

This is the Pioneer Legends Racers Deep Guide Blade (7mm) with Short Shaft Legends Racers guide with 7mm deep blade and a short shaft. IncludesPioneer Guide Blade Deep (7mm) with Short Shaft For Legends Racers SpecificationsScale: 1/32

This is the Pioneer Standard Guide Blade (7mm) FeaturesOptional fit guide with 7mm deep blade.This deeper guide blade is suitable for most modern plastic tracks Pioneer Spare Parts keep your car running at its best IncludesPioneer Standard Guide Blade...

This is the Pioneer Standard Guide Blade (6mm) FeaturesStandard fit on all Pioneer modelsThis guide has a 6mm blade, shallow enough to clear all legacy plastic track systems Pioneer Spare Parts keep your car running at its best IncludesPioneer Standard...

This is the Pioneer Medium Soft Copper Braids - (Pack of 4) FeaturesMedium Soft Copper Standard Fitment for Pioneer GuidePull-Out, Push-In QuickChange Pioneer Spare Parts keep your car running at its best Includes(4) Pioneer Medium Soft Copper...

This is the Pioneer ULTRABraid Pure Copper Racing Braid: Medium Soft 3ft (900mm) A high performance, premium quality braid that is excellent as an aftermarket hop-up for many slot cars using the ‘eyelet’ braid retaining method on guides...

This is the GPM Stainless Steel Rear Lower Bulkhead Tie Bar Features: Strengthens the rear lower swing arm Replaces Stock Part #9528 Accessory Part For: Sledge  

This is the GPM Stainless Steel Front Lower Bulkhead Tie Bar Features: Strengthens the lower swing arm Replaces Stock Part #9527 Accessory Part For: Sledge

This is the GPM Red Aluminum 6061-T6 Wheel Lock Features: Lock and stabilize the wheel tight Replaces Stock Part #9627 and #9628 Accessory Part For: SledgeE-Revo VXL

This is the GPM Green Aluminum 6061-T6 Wheel Lock Features: Lock and stabilize the wheel tight Replaces Stock Part #9627 and #9628 Accessory Part For: SledgeE-Revo VXL

This is the GPM Black Aluminum 6061-T6 Wheel Lock Features: Lock and stabilize the wheel tight Replaces Stock Part #9627 and #9628 Accessory Part For: SledgeE-Revo VXL