This is the Traxxas Tires & wheels, assembled, glued (S1 ultra-soft off-road racing compound) (SCT Split-Spoke satin chrome, black beadlock style wheels, BFG Mud-Terrain tires, foam inserts) (2) (4WD front/rear, 2WD rear only). Pair of ultra-soft...

This is the Traxxas Tires, Kumho (dual profile 4.3x1.7- 2.2/3.0') (2)/ foam inserts (2).Replica 4.3″ x 1.7″ Kumho tires are designed for SCT wheels with a dual profile outer 2.2″ diameter and 3.0″ inner diameter. Includes foam...

This is the Traxxas Bulkhead tie bars, front & rear, aluminum (blue-anodized). Set of front and rear bulkhead tie bars with a brilliant blue anodized finishReplacement part forFord Fiesta ST RallyHoss 4X4 VXLRustler 4X4 VXLRustler 4X4Slash 4X4...

This is the Traxxas Tires & wheels, assembled, glued (SCT black, orange beadlock wheels, dual profile (2.2' outer, 3.0' inner), SCT off-road racing tire, foam inserts) (2) (4WD f/r, 2WD rear) (TSM rated). This is Traxxas part number 5863Part Number:...

This is the Traxxas Center Wing Mount with Washers for 1/10 E-Revo and Revo 3.3 trucks.IncludesOne Center Wing MountTwo Beveled Nylon Wing Washers Replacement Part ForE-Revo VXL Brushless Accessory Part ForRevo

This is the Traxxas Steering Arm Mount and Stops for the 1/10 E-Revo, Revo 3.3, Summit, and Slayer trucksFits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitRevo 3.3SlayerSlayer Pro

This is a pair of Traxxas Red Aluminum Front and Rear Bulkhead Tie Bars for use on 1/10 E-Revo, Summit, Revo 3.3, and Slayer trucks.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitRevo 3.3SlayerSlayer Pro

This is the Traxxas TRX 2.5 & 3.3 Engine Backplate 20x1.4mm O-Ring, part number 5213.

This is a pair of Traxxas Talon Tires with Foam Inserts, Pre-Mounted on 3.8" Satin Wheels with 14mm Hex Hubs. These can be used on 1/10 E-Revos, Revo 3.3, E-Maxx, and T-Maxx trucks using 14mm hexes.Features Plastic 5-split spoke wheels with satin...

This is a pair of Traxxas 7075-T6 Black Aluminum Rear 124mm Toe Link Tubes with Rod Ends and Wrench for the T-Maxx 2.5R, 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucks with the sealed pivot ball suspension. These are 30% lighter than the stock links, and...

This is the Traxxas Wide Ratio Gear Set for the 1/10 E-Revo, Summit, and E-Maxx Trucks. It consists of a 26-tooth first gear, and 13-tooth input gear.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitE-MaxxE-Maxx Brushless

This is a package of six Traxxas 4x14mm Button-Head Hex Machine Screws.Replacement part for these modelsE-Revo VXL BrushlessFord Fiesta ST RallyHoss 4X4 VXLMaxxRevoRustler 4X4 VXLSlash 4X4 UltimateSlayer Pro 4X4SummitUnlimited Desert RacerX-MaxxXO-1XRT

This is the Traxxas Velineon 380 Brushless Motor Rebuild Kit for the 1/16 brushless system. It includes two 4x9x4mm ball bearings, two 2x6mm screws with threadlock, and two front shims.Includes:Two 4x9x4mm Ball BearingsTwo 2x6mm Countersunk ScrewsTwo...

This is a pair of Traxxas Bandit Rear White Dish Wheels. These feature a slot in the hub to slide over the axle pin on the Bandit XL-5 and VXL buggies. They are also dyeable to create a custom color for your buggy!FEATURES:Rear use only for the Traxxas...

This is the Robinson Racing Extra Hard Steel 20-Tooth Pinion with 1 Mod Pitch and 5mm Bore.FeaturesExtra hardened steel construction for durabilityPrecision madeFor use in extreme conditionsIncludesOne 20 tooth pinion gearOne set...

This is the RPM Black Light Canister Set for the RPM Slash 2WD, Slash 4x4 and other RPM Short Course Bumpers (see full fitment info below). LED lights are not included.Our Light Canister Set for RPM Slash 2wd Front Bumpers #80952, #80953 or #80955, Slash...

This is the RPM Green Rear Suspension A-Arm Set for the Traxxas Rustler and Stampede 2WD vehicles. This includes one left and one right rear arm.RPM rear A-arms for the electric versions of the Traxxas Rustler & Stampede are stronger and more durable...

These are the RPM Black 4-40 HD Rod Ends for 4.3mm/0.17" Ball Studs. When it comes to rod ends, RPM rod ends are the basis for comparison! Our rod ends are strengthened in all the right places, they are molded to the strictest of tolerances, and are...

This is the LaTrax Alias LED Lightbar Set. It includes everything needed to mount it to your Alias quad. Take Alias night flying fun to the next level with the high-intensity LED light bar. Alias auto-detects the LED light bar, and it can be turned on...

This is the Traxxas Rear LED Light Harness with Six Lights for use on the Summit 1/10 TruckFeatures: JST ConnectorIncludes:One Rear HarnessSix Clear LED LightsThree Zip TiesOne Wire Clip

This is a Long Spring Set for GTR Shocks used on the Traxxas Summit Monster Truck.FeaturesSteel constructionRed in color5.4 damping rateDouble orange stripe markingIncludesTwo Long Springs for the Traxxas GTR shocks SpecificationsLength: 2"...

This is the E-Flite 150mAh 1-Cell 3.7V 25C Li-Po Battery. It is used in many airplanes and helicopters, such as the E-Flite UMX Ultra-Micro series airplanes, Parkzone and Hobbyzone airplanes, and the Blade Nano QX Quad, mCX, and mSR Helicopters...

This is a Traxxas Rod End Set for the optional GTR shocks on the Revo. Features: Plastic construction Black in color Includes: Six Rod Ends Specifications:Length: 18.35mm (0.72")Width at ball joint: 10.35mm (0.40") Comments: If Pivot Balls are...

This is the Traxxas EZ-Start 1 Quick Connector Stock Replacement Wiring Harness. Features: All wires included in an EZ starting system Includes:One complete wire set with connectorsTwo zip tiesOne adhesive foam pad Requires: The remainder of the EZ...

This is a set of Force Upper Main Blades for the MH-35 and FHX combat helicopters.

This is a set of Force Lower Main Blades for the MH-35 and FHX combat helicopters.

This is a pair of Assembled and Glued Tires and Wheels for the Traxxas Summit. FEATURES Canyon AT tires with angular lugs Geode chrome plated plastic wheels with 17mm hex INCLUDESTwo Tires and Wheels for the Traxxas Summit REQUIRESSidewall...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Front, +20% Rate, Blue (2). Features Custom wound for Slash 4X4 Progressive-rate design allows small-bump compliance without compromising big-hit capability Durable powdercoated...

This is the Rear Plastic Skidplate for the T-Maxx 3.3. FEATURES Attaches to and protects chassis and supports the rear bulkhead Skidplate is gray in color INCLUDESSkidplate and stainless steel plate REQUIRESInstalling on chassis with four 3x12mm...

This is the Front Body Mount Posts, Rear Body Mount and four Screw Pins for the Traxxas T-Maxx 3.3R. FEATURES Constructed of plastic these posts and mount attach the body to the chassis INCLUDESTwo Front Body Mount Posts Rear Body Mount and...

This is a replacement set of skid plates for the Traxxas Stampede. Black front and rear skid plates for Traxxas 2WD Stampede models. FEATURES Made of black molded nylon For the Traxxas Stampede SPECSLength of front plate: 5 5/8"Thickness of front...

This is the Dynamite Startup Tool Set for Traxxas Nitro and Electric Vehicles. Features Engineered specifically for Traxxas vehicle owners Contains most every tool needed in order to maintain a Traxxas vehicle Conveniently packaged in a durable...

This is the Integy Silver Aluminum Steering Bellcrank Set for the Traxxas Rustler, Slash 2WD, and Bandit FEATURES Aluminum construction, Silver in color Four 6x12mm ball bearings for super smooth operation INCLUDESOne set of steering...

This is a set of Team Integy Silver Aluminum Rear Lower Suspension Arms for use on the Traxxas Stampede and Rustler VXL and XL-5 Vehicles. FEATURES Aluminum construction Silver in color INCLUDESOne left and one right lower rear...

This is the Robinson Racing Extra Hard 16-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...

This is the optional Blue Traxxas Resonator Dyno-Tuned Performance Pipe for the Traxxas Jato, Nitro Rustler and Nitro 4-Tec with TRX Racing Engines. FEATURES:The Traxxas Resonator aluminum tuned pipe is specifically engineered to fit right in the...

This is the Receiver Box for the T-Maxx 3.3. FEATURES:Holds receiver and Optidrive Shift Module in placeTwo piece, gray in color, constructed of hardened plastic INCLUDES:Receiver Box and Body Clip REQUIRES:Fastening to chassis, installing components and...

These are the Traxxas Tubes Lightweight Red Aluminum Turnbuckles for the Traxxas T-Maxx 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucks.FEATURES: 30% lighter than stock steel toe links 4 times stiffer and more than double the strength of aftermarket...

This is an optional Wheelie Bar Mount for the Traxxas Electric Stampede, Rustler and Bandit. FEATURES:Constructed of hardened plastic, black in colorInstalls at rear of chassis to hold wheelie bar arm and wheels in place INCLUDES:Assembled optional...

This is Traxxas Rod Ends Short Hollow Balls Set of six short rod ends with hollow ball connectors Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaChevrolet Corvette StingrayDrag...