These are the Traxxas 1/16 Red Aluminum Toe Links (4) (Assembled with rod ends and threaded inserts).Accessory Part For1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Rally VXL1/16 Slash 4x4

These are the Traxxas 4x8x3mm Blue Rubber Sealed Ball Bearings (8). Set of eight 4x8x3 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction. Replacement Part...

These are the Traxxas 1/16 Red Aluminum Push Rods (4) (Assembled with rod ends).Accessory Part For1/16 Slash 4x4

These are the Traxxas 3x35mm Cap-Head Hex Machine Screws (6) for use on the Traxxas E-Revo 2.0 trucks.Stock Replacement OnE-Revo 2.0

These are the Traxxas Blue Front Springs (2) for Long Ultra Shocks found on vehicles like the Stampede, Craniac, Skully, Bigfoot, and other trucks based on the Stampede chassis. Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaHoss 4X4...

This is a set of four Traxxas 17mm Splined Serrated Green Aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action...

This is the Traxxas TRX-4 Scale Crawler Differential Gear Set. This set consists of 2 diff output gears, 4 spider gears, and 2 spider gear shafts.Includes2 Diff Output Gears4 Spider Gears2 Spider Gear ShaftsStock Replacement OnTRX-4 Crawler KitTRX-4 Ford...

This is the Traxxas TRX-4 Scale Crawler Differential Ring and Pinion Gear Set. These diff gears can be used in the front or rear.Stock Replacement OnTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land Rover DefenderTRX-4 SportTRX-4 Tactical

This is a pair of Traxxas TRX-4 Crawler GTS Rear 0.54 Rate Green Stripe Shock Springs. These have a natural finish.FitsTRX-4

This is the Hot Racing Traxxas X-Maxx Aluminum Adjustable Servo Saver and Bellcrank Assembly. This works on the X-Maxx 6S and 8S trucks.FEATURES:- Super-tough, fully adjustable servo saver bell crank- Replaces factory plastic for a...

This is the Hot Racing Black Aluminum Front Bulkhead for Traxxas 1/16 E-Revo, Summit, Slash, and Rally. This will fit the brushed and VXL brushless versions of these vehicles. This is a direct replacement for Traxxas part 7030X.FEATURES:- Robust CNC...

This is the Hot Racing Aluminum Motor Mount and hardware for the Traxxas DCB M41 brushless boat. Made of CNC-machined 6061-T6 aluminum, this mount is designed to allow quick motor service, while also being extremely durable.FEATURES:CNC 6061-t6 aluminum...

This is the Hot Racing 31-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision Gears with Standard 4140 steelReduce internal rotating mass...

This is the Traxxas Black Complete Wheelie Bar. Wheelie bar comes assembled with wheelsFitsX-Maxx 6SX-Maxx 8SXRT

This is the Traxxas Red Aluminum Stub Axle. Add a touch of style to your X-Maxx or XRT with these brightly-anodized aluminum stub axles.  For use with 8s-spec heavy duty driveshaft (#7750X) only. Replacement Part For These ModelsX-MaxxXRT

These are the Traxxas X-Maxx 8S Battery Compartment Spacers and Foam Pads. This includes two battery compartment spacers, four foam blocks, and two foam pads.

This is the Traxxas Aton Green High Visibility Decal Set. Brighten up your Aton and give it a customer look with this decal set!

This is the Spektrum S6230 High-Torque Digital Surface Servo. The S6230 offers high-torque in a more compact size for 1/10th scale crawlers or monster trucks where space is limited. These servos feature Spektrum innovations like the removable wire leads...

This is the Traxxas Aton Brushless Motor. This is Traxxas part number 7934Part Number: 7934 / TRA7934FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have any questions.

This is the Traxxas X-Maxx Slipper Pressure Plate and Hub.FeaturesCast metal constructionInstalls on transmission input shaft and connects to spur gearIncludesPressure PlateHubPin

This is the Traxxas X-Maxx Motor Mount and Pin Set. This includes the front and rear motor mount, and two steel pins.Features Two-piece molded composite plastic construction Attaches to rear bulkhead and fastens to both ends of motor IncludesFront and...

This is the Traxxas Bulkhead, front & rear / differential housing, front & rear.Front and rear bulkheads with front and rear differential housing coversReplacement Part For1/18 LaTrax Desert Prerunner1/18 LaTrax Rally1/18 LaTrax Teton

This is the Traxxas LaTrax Carbon Fiber Chassis Conversion Kit with chassis, upper chassis, battery hold down, adhesive foam tape, and hardware. Dramatically increase the stiffness and precision of your LaTrax Teton or Rally with this genuine carbon...

This is the Traxxas Nerf bars, chassis (2). This is Traxxas part number 7423Part Number: 7423 / TRA7423Fits1/10 RallySlash 4x4 (low-CG)Slash 4x4 PlatinumSlash 4x4 UltimateMore detail coming soon! Please check your vehicle manual to confirm vehicle...

This is the Traxxas Spring, shock (GTR) (1.02 rate, double black) (1 pair). This is Traxxas part number 7143Part Number: 7143 / TRA7143Fits1/16 Slash 4x4More detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us...

This is the Traxxas Spring, shock (GTR) (0.94 rate, double tan) (1 pair). This is Traxxas part number 7142Part Number: 7142 / TRA7142Fits1/16 Slash 4x4Funny CarMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or...

This is the Traxxas Gear set, differential (output gears (2)/ spider gears (3))/ differential output shafts (2)/ 1.5x6mm pin (3)/ 1.5x8mm pin (2). This is Traxxas part number 7082Part Number: 7082 / TRA7082Fits1/16 E-Revo Brushed1/16 E-Revo VXL...

This is the Traxxas Tires & wheels, assembled, glued (S1 ultra-soft off-road racing compound) (SCT Split-Spoke satin chrome, black beadlock style wheels, BFG Mud-Terrain tires, foam inserts) (2) (4WD front/rear, 2WD rear only). Pair of ultra-soft...

This is the Traxxas Tires, Kumho (dual profile 4.3x1.7- 2.2/3.0') (2)/ foam inserts (2).Replica 4.3″ x 1.7″ Kumho tires are designed for SCT wheels with a dual profile outer 2.2″ diameter and 3.0″ inner diameter. Includes foam...

This is the Traxxas Bulkhead tie bars, front & rear, aluminum (blue-anodized). Set of front and rear bulkhead tie bars with a brilliant blue anodized finishReplacement part forFord Fiesta ST RallyHoss 4X4 VXLRustler 4X4 VXLRustler 4X4Slash 4X4...

This is the Traxxas Tires & wheels, assembled, glued (SCT black, orange beadlock wheels, dual profile (2.2' outer, 3.0' inner), SCT off-road racing tire, foam inserts) (2) (4WD f/r, 2WD rear) (TSM rated). This is Traxxas part number 5863Part Number:...

This is the Traxxas Center Wing Mount with Washers for 1/10 E-Revo and Revo 3.3 trucks.IncludesOne Center Wing MountTwo Beveled Nylon Wing Washers Replacement Part ForE-Revo VXL Brushless Accessory Part ForRevo

This is the Traxxas Steering Arm Mount and Stops for the 1/10 E-Revo, Revo 3.3, Summit, and Slayer trucksFits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitRevo 3.3SlayerSlayer Pro

This is a pair of Traxxas Red Aluminum Front and Rear Bulkhead Tie Bars for use on 1/10 E-Revo, Summit, Revo 3.3, and Slayer trucks.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitRevo 3.3SlayerSlayer Pro

This is the Traxxas TRX 2.5 & 3.3 Engine Backplate 20x1.4mm O-Ring, part number 5213.

This is a pair of Traxxas Talon Tires with Foam Inserts, Pre-Mounted on 3.8" Satin Wheels with 14mm Hex Hubs. These can be used on 1/10 E-Revos, Revo 3.3, E-Maxx, and T-Maxx trucks using 14mm hexes.Features Plastic 5-split spoke wheels with satin...

This is a pair of Traxxas 7075-T6 Black Aluminum Rear 124mm Toe Link Tubes with Rod Ends and Wrench for the T-Maxx 2.5R, 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucks with the sealed pivot ball suspension. These are 30% lighter than the stock links, and...

This is the Traxxas Wide Ratio Gear Set for the 1/10 E-Revo, Summit, and E-Maxx Trucks. It consists of a 26-tooth first gear, and 13-tooth input gear.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitE-MaxxE-Maxx Brushless

This is a package of six Traxxas 4x14mm Button-Head Hex Machine Screws.Replacement part for these modelsE-Revo VXL BrushlessFord Fiesta ST RallyHoss 4X4 VXLMaxxRevoRustler 4X4 VXLSlash 4X4 UltimateSlayer Pro 4X4SummitUnlimited Desert RacerX-MaxxXO-1XRT

This is the Traxxas Velineon 380 Brushless Motor Rebuild Kit for the 1/16 brushless system. It includes two 4x9x4mm ball bearings, two 2x6mm screws with threadlock, and two front shims.Includes:Two 4x9x4mm Ball BearingsTwo 2x6mm Countersunk ScrewsTwo...