XRT

This is the Traxxas Gravix Race Tires and Black Wheels Assembled Low-profile 7.4″ x 4.0″ Gravix race tires are built to run hard at the track or in the wild. The directional tread pattern runs quieter than traditional off-road tires with...

This is the Traxxas Complete Rear Differential.  This comes pre-assembled and includes both the ring and pinion gear, as well as bearings. The Pro Built rear differential comes completely assembled and ready to install in your 8s X-Maxx or XRT...

This is the Traxxas Complete Front Differential.  This comes pre-assembled and includes both the ring and pinion gear, as well as bearings. The Pro Built front differential comes completely assembled and ready to install in your 8s X-Maxx or XRT...

This is a set of four Traxxas 17mm Splined Serrated orange-aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action...

This is the Traxxas 20x32x7mm Black Rubber Sealed Ball Bearings (2). Pair of 20x32x7 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate protection and less maintenance in dirty...

This is the Traxxas Cush Drive Transmission Input Shaft.Replacement part forX-Maxx XRT

This is a set of six Traxxas Wheel Hex Clips for the X-Maxx monster truck.FeaturesSteel constructionSnaps onto groove of each stub axle to hold wheel hub and uprights in placeIncludes: Six Wheel Hex Clips Accessory Part ForX-MaxxXRT

This is the Traxxas 11-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore. 11-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Designed for steel spur gears. Traxxas pinion gears let you fine-tune the...

This is the Billet Machined Suspension Conversion Kit (Silver) Upgrade your XRT with the Integy premium Billet Machined Suspension Conversion Kit, designed to enhance your RC experience. The kit features alloy front and rear lower arms, alloy front and...

This is the Billet Machined Suspension Conversion Kit (Red) Upgrade your XRT with the Integy premium Billet Machined Suspension Conversion Kit, designed to enhance your RC experience. The kit features alloy front and rear lower arms, alloy front and rear...

This is the Billet Machined Suspension Conversion Kit (Orange) Upgrade your XRT with the Integy premium Billet Machined Suspension Conversion Kit, designed to enhance your RC experience. The kit features alloy front and rear lower arms, alloy front and...

This is the Billet Machined Suspension Conversion Kit (Grey) Upgrade your XRT with the Integy premium Billet Machined Suspension Conversion Kit, designed to enhance your RC experience. The kit features alloy front and rear lower arms, alloy front and...

This is the Billet Machined Suspension Conversion Kit (Green) Upgrade your XRT with the Integy premium Billet Machined Suspension Conversion Kit, designed to enhance your RC experience. The kit features alloy front and rear lower arms, alloy front and...

This is the Traxxas 23-T Pinion Gear, 1.0 Metric Pitch, for 5mm Shaft, with Set Screw 23-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Designed for steel spur gears. Traxxas pinion gears let you fine-tune the...

This is the Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers. This works with 2S, 3S, and 4S ID LiPo batteries to connect them to cell voltage checkers for individual cell reading. Warning: These are not intended for charging. The...

This is the Traxxas Aluminum Differential Carrier. This diff carrier must be used with 7783X spider gear shafts. Aluminum differential carrier includes X-ring gaskets (2), ring gear gasket, and PTFE washers (2). Compatible with Torque-Biasing Center...

These are the Traxxas 3x15mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many different Traxxas vehicles.Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL...

This is a set of six Traxxas 4mm x 10mm Countersunk Machine Screws for the Jato 2.5 and 3.3 trucks. Replacement part for these modelsJatoMaxxNitro SlashX-MaxxXRT

This is the GPM Silver Aluminum 7075-T6 Front Steering Assembly: XRT FeaturesAluminium upgrade for the front assembly to improve steering performance, anodized in color Replaces Traxxas stock part number 7843 Accessory Part ForXRT

This is the GPM Red Aluminum 7075-T6 Front Steering Assembly: XRT FeaturesAluminium upgrade for the front assembly to improve steering performance, anodized in color Replaces Traxxas stock part number 7843 Accessory Part ForXRT

This is the GPM Blue Aluminum 7075-T6 Front Steering Assembly FeaturesAluminium upgrade for the front assembly to improve steering performance, anodized in color Replaces Traxxas stock part number 7843 Accessory Part ForXRT

These are the Traxxas 6x13x5mm Black Rubber Sealed Ball Bearings (2). Each package includes two bearings. Pair of 6x13x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate...

This is the Traxxas Black Chrome Race Wheels Gravix Belted Belted Gravix low-profile 7.4″ x 4.0″ tires deliver game-changing performance on the track or in the wild. The directional tread pattern provides excellent traction and runs quieter...

This is the Traxxas Glued Assembled Black Belted Dual Profile Tires (XRT Race black wheels, Gravix belted tires, dual profile (4.3" outer, 5.7" inner), foam inserts) (left & right) Belted Gravix low-profile 7.4″ x 4.0″ tires deliver...

This is the Traxxas Black XRT Race Wheels (Left and Right) Large 4.0″ XRT wheels feature a matte black finish for a high-tech look. A huge 24 mm splined hub maximizes surface. Sold as a left and right pair. Replacement Part ForXRT Accessory Part...

This is the Traxxas Left & Right Steering Blocks and Caster Blocks (C-Hubs) These left and right steering blocks and caster blocks were redesigned and beefed-up for XRT. Standard in XRT, they can be used to upgrade X-Maxx for extreme duty and maximum...

This is the GPM Silver Aluminum 6061-T6 Servo Mount & Tie Rod & 25T Servo Horn Set FeaturesAluminium upgrade for the servo mount and tie rod anodized in color IncludesServo mount - (1pc)Aluminum tie rod - (1pc)Aluminum servo horn 25T - (1pc)Flat...

This is the GPM Red Aluminum 6061-T6 Servo Mount & Tie Rod & 25T Servo Horn Set FeaturesAluminium upgrade for the servo mount and tie rod anodized in color IncludesServo mount - (1pc)Aluminum tie rod - (1pc)Aluminum servo horn 25T - (1pc)Flat...

These are the Traxxas Spider Gear Shafts and Spacers for use in the 7781X aluminum diff carrier. Spider gear shafts (2) include spacers (4) and 16x23.5x0.5 mm PTFE washers (2). Fits 7781X aluminum differential carrier.Includes(2) Spider gear shafts(4)...

These are Traxxas 3x8mm Button Head Screws (6). Features: Black steel construction with hex headIncludes: Six screws Replacement part for these models1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBlastDrag Slash 1967 Chevrolet...

This is a package of six Traxxas 4x12mm Button-Head Hex Machine Screws. Replacement part for these modelsDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0E-Revo VXL BrushlessFord F-150 RaptorFord Fiesta ST RallyHoss 4X4...

These are the Traxxas 3x10mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many of the Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL...

This is the GPM Silver 7075 Alloy Rear Hub Stub AXLE Carriers With Oversize Bearings 7075 alloy material offers greater durability during usage. The three enlarged bearings are designed for more precise steering. IncludesRear Knuckle Arms - 2pcsBearing...

This is the GPM Red 7075 Alloy Rear Hub Stub AXLE Carriers With Oversize Bearings 7075 alloy material offers greater durability during usage. The three enlarged bearings are designed for more precise steering. IncludesRear Knuckle Arms - 2pcsBearing...

This is the GPM Orange 7075 Alloy Rear Hub Stub AXLE Carriers With Oversize Bearings 7075 alloy material offers greater durability during usage. The three enlarged bearings are designed for more precise steering. IncludesRear Knuckle Arms - 2pcsBearing...

This is the GPM Green 7075 Alloy Rear Hub Stub AXLE Carriers With Oversize Bearings 7075 alloy material offers greater durability during usage. The three enlarged bearings are designed for more precise steering. IncludesRear Knuckle Arms - 2pcsBearing...

This is the GPM Black 7075 Alloy Rear Hub Stub AXLE Carriers With Oversize Bearings 7075 alloy material offers greater durability during usage. The three enlarged bearings are designed for more precise steering. IncludesRear Knuckle Arms - 2pcsBearing...

This is the GPM Blue 7075 Alloy Rear Hub Stub AXLE Carriers With Oversize Bearings 7075 alloy material offers greater durability during usage. The three enlarged bearings are designed for more precise steering. IncludesRear Knuckle Arms - 2pcsBearing...

This is the Traxxas X-Maxx Blue Aluminum Motor Mount Washer and Screw Set. Specially engineered aluminum washers add additional strength and good looks to the motor mounts in the X-Maxx chassis.IncludesFour Motor Mount WashersFour 4x18mm Screws Accessory...

This is the Traxxas X-Maxx 16-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore.  16-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas...