TRX-6 6x6 Scale & Trail Crawler

This is the Traxxas TRX-4 Scale Crawler Differential Gear Set. This set consists of 2 diff output gears, 4 spider gears, and 2 spider gear shafts.Includes2 Diff Output Gears4 Spider Gears2 Spider Gear ShaftsStock Replacement OnTRX-4 Crawler KitTRX-4 Ford...

This is the Traxxas TRX-4 Scale Crawler Differential Ring and Pinion Gear Set. These diff gears can be used in the front or rear.Stock Replacement OnTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land Rover DefenderTRX-4 SportTRX-4 Tactical

This is a pair of Traxxas TRX-4 Crawler GTS Rear 0.54 Rate Green Stripe Shock Springs. These have a natural finish.FitsTRX-4

This is a Traxxas Jato 2.5 and 3.3 Shim Set.  This includes four silver metal hollow balls and four 3mm silver washers.  These are for adjusting the roll center of the truck.

These are the Traxxas TRX-4 Rear Heavy Duty Chromoly Axles. These are for use with the TRA8065 machined rear portal input drive gears.Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land Rover DefenderTRX-4 SportTRX-4 Tactical

These are the Traxxas TRX-4 Front Heavy Duty Chromoly Left and Right Axle Shafts. These can only be used with the TRA8064 machined portal drive input gear.Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land Rover DefenderTRX-4 SportTRX-4...

These are the Traxxas TRX-4 Inner Fenders, Rock Light Covers, Battery Plate and 3x8 Screws (4). This is the stock set found on the TRX-4 Ford Bronco. Front and rear inner fenders for the TRX-4 with rock light covers (8), battery plate, and 3x8 mm screws...

This is a pair of Traxxas TRX-4 White Stripe 0.30 Rate GTS Shock Springs (natural finish).Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land RoverTRX-4 Tactical

These are the Traxxas TRX-4 Crawler Left and Right Front Inner Portal Drive Housings and 2.5x4mm Screws (6).FitsTRX-4

This is the Traxxas TRX-4 Front Machined Portal Drive Input Gear (left or right). These must be used with the TRA8060 chromoly axles.Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land Rover DefenderTRX-4 SportTRX-4 Tactical

This is the Traxxas TRX-4 Machined Steel Underdrive Differential Ring and Pinion Gear Set. This can be used in the front and rear diff on the TRX-4. Use of this set will increase torque at the wheels. This includes a 10-tooth pinion gear and 35-tooth...

This is the Traxxas 10-Tooth 32-Pitch Steel Pinion Gear with Set Screw.Stock Replacement OnStampede 4x4 XL-5Accessory Part ForStampede 4x4 VXLTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land RoverTRX-4 Tactical

This is the GPM 40CR Aluminum 7075 Rear Chassis Crossmember (Silver) Made with a quality light weight high tensile strength aluminum 7075 for greater support and durability. Replaces Part # 8239 IncludesChassis crossmember - 1pcsGrade 12.9 black Round...

This is the GPM 40CR Aluminum 7075 Rear Chassis Crossmember (Red) Made with a quality light weight high tensile strength aluminum 7075 for greater support and durability. Replaces Part # 8239 IncludesChassis crossmember - 1pcsGrade 12.9 black Round Head...

This is the GPM 40CR Aluminum 7075 Rear Chassis Crossmember (Orange) Made with a quality light weight high tensile strength aluminum 7075 for greater support and durability. Replaces Part # 8239 IncludesChassis crossmember - 1pcsGrade 12.9 black Round...

This is the GPM 40CR Aluminum 7075 Rear Chassis Crossmember (Gray Silver) Made with a quality light weight high tensile strength aluminum 7075 for greater support and durability. Replaces Part # 8239 IncludesChassis crossmember - 1pcsGrade 12.9 black...

This is the GPM 40CR Aluminum 7075 Rear Chassis Crossmember (Green) Made with a quality light weight high tensile strength aluminum 7075 for greater support and durability. Replaces Part # 8239 IncludesChassis crossmember - 1pcsGrade 12.9 black Round...

This is the GPM 40CR Aluminum 7075 Rear Chassis Crossmember (Black) Made with a quality light weight high tensile strength aluminum 7075 for greater support and durability. Replaces Part # 8239 IncludesChassis crossmember - 1pcsGrade 12.9 black Round...

This is the GPM 40CR Aluminum 7075 Rear Chassis Crossmember (Blue) Made with a quality light weight high tensile strength aluminum 7075 for greater support and durability. Replaces Part # 8239 IncludesChassis crossmember - 1pcsGrade 12.9 black Round Head...

This is the Traxxas Pro Scale Winch Kit with Wireless Controller Powerful, Realistic Winch Capability for Traxxas TRX-4 and TRX-6 The new Pro Scale Winch puts the TRX-4 and TRX-6 even further over the top as the most full-featured and authentic trucks on...

This is the Traxxas TRX-4 Sport Two-Speed Conversion Upgrade Kit. This adds the ability to switch from high to low range gearing in seconds from your transmitter. The set includes all the necessary transmission parts and the shifting servo.For full...

This is the Traxxas TRX-4 Rear Machined Portal Drive Input Gear (left or right). These must be used with TRA8063 chromoly rear axles.Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land Rover DefenderTRX-4 SportTRX-4 Tactical

These are Traxxas 12x18x4mm Black Rubber Sealed Ball Bearings (2). Each package contains two bearings. Includes: a Pair of 12x18x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for...

This is the Traxxas 3x8mm Hex Cap Screws with Washers Upgrade your Phillips-head motor mount screws with these 3x8 mm cap-head machine screws and washers. Includes wrench. Includes (6) Washers (6) Hex Cap Screws (1) Wrench Replacement Part ForFord F-150...

These are the Traxxas TRX-4 Scale Crawler 2-Speed Drive Hub, Shift Dog, Shift Fork, Shaft Seal, and 2-Speed Linkage.Stock Replacement OnTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land Rover DefenderTRX-4 TacticalAccessory Part ForTRX-4 SportNote: Accessory...

These are the Traxxas TRX-4 Crawler Grey Bumper D-Rings and Mount Screws. This includes four D-rings and four 2.0x12mm screws.FitsTRX-4

These are the Traxxas 5x8x2.5mm Black Rubber Sealed Ball Bearings (2). Each package includes two bearings. Pair of 5x8x2.5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate...

These are the Traxxas 2.5x16mm Cap-Head Hex Machine Screws (6). Each package includes six screws.FitsTRX-4

This is the Traxxas TRX-6 Ultimate RC Hauler LED Light Set  LED light set for the #8823 TRX-6 Ultimate RC Hauler body IncludesHeadlightsRoof Lights Replacement Part ForTRX-6 Ultimate RC Hauler

This is the Traxxas TRX-6 Ultimate RC Hauler Clear Body From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and Traxxas ProGraphix paint makes it easy to get professional quality results. Traxxas clear...

This is the Traxxas XL-5HV 3s Waterproof Electronic Speed Control. With Low-Voltage Detection and Fwd/Rev/Brake The high-voltage XL-5 HV electronic speed control for TRX-4 and TRX-6 trucks handles up to 11.1 Volts of 3S LiPo power. In addition to the...

This is the Traxxas Metal Gear Set for 2270 Servo Replacement metal gear set for the 2270 steering servo. *Does not fit other servos. Replacement Part ForTRX-4 Equipped with Traxx Accessory Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit...

This is the Traxxas Servo Case / Gaskets for Servo 2270.  Replacement servo case for the 2270 steering servo. Includes hardware.   Replacement Part ForTRX-4 Equipped with Traxx Accessory Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD...

This is the Traxxas High-Torque Digital Metal Gear 2270 Servo High-Torque Digital Metal Gear ServoThe waterproof, high-torque 2270 servo is the perfect upgrade for 1/10 scale vehicles. With 236 oz-in of torque on tap and full metal gears, the 2270 servo...

This is a pair of Traxxas TRX-4 Crawler 12mm Hex Wheel Hubs with Stub Axle Pins. This includes two hex hubs, two pins, and two screw pins.Stock Replacement OnTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land Rover DefenderTRX-4 Tactical

These are the Traxxas TRX-4 Crawler Portal Drive Caster Blocks and Kingpin Bushings. This includes two castor blocks and four kingpin bushings.FitsTRX-4

These are Traxxas 2.5x8mm Cap Head Screws (6). Features: Steel construction Black in color Cap head design Includes: (6) 2.5x8mm cap head screws Specifications:Length: 5/16" (8mm)Diameter: 3/32" (2.5mm)

This is the Traxxas Front and Rear body mounts for the #9129 Mercedes-Benz G 63 AMG 6x6 Front and rear body mounts for the 9129 Mercedes-Benz G 63 AMG 6x6. Includes (4) 2.4x10 mm screws (8) 1.6x8 mm screws (2) 2.5x12 mm screws Replacement Part...

This is the Integy Realistic Model 1/10 Scale Accessories Set for Off-Road Crawler (Red) Add realism and that finishing touch to your 1/10 scale rig with the Integy Realistic Model 1/10 Scale Accessories Set. The Set Includes:(1) Scale Metal Shovel(1)...

This is the Integy Realistic Model 1/10 Scale Accessories Set for Off-Road Crawler (Black) Add realism and that finishing touch to your 1/10 scale rig with the Integy Realistic Model 1/10 Scale Accessories Set. The Set Includes:(1) Scale Metal Shovel(1)...