Traxxas Stampede 2WD XL-5 & VXL RC Trucks, Parts & Upgrades
Traxxas Stampede 2WD XL-5 VXL
Do you want something that’s race-ready yet still a great option for beginning model drivers or younger motorsports enthusiasts? If so, then you’re going to want the Stampede XL-5. It’s got a top speed of around 30 MPH measured in real rather than scale miles, so you can be sure that it’s going to offer a ton of real action without sacrificing a whole lot in terms of control.
In many ways, we consider the Traxxas Stampede line to be the original high-performance offload monster truck at the RC Superstore. Best of all, the stock performance figures of this vehicle can be upgraded through judicious use of aftermarket parts.
Traxxas Stampede 2WD Parts & Upgrades
While each of these models offers some serious scale horsepower, you’re eventually going to run into a situation where you might either want some replacement parts or you’re going to need to upgrade one of the underlying components. Perhaps you’ll want to start with a cooling fan or another component that includes comparable moving parts. Since these components rotate, you may want to keep a few extras on hand if you do any real hardcore driving. Motors themselves, however, are what most people are going to be looking into.
2WD Brushless Motors
Waterproof brushless motor assemblies are what makes the Stampede series so attractive. Motor brushes have to be periodically replaced on any design that makes use of them, but Stampede VXL brushless motor systems don’t require any such small parts to be installed. As a result, you can keep your vehicle running longer without having to worry about opening the physical motor housing and making adjustments. This is good news for anyone who wants to start investing in additional motors because they’re going to be seriously racing.
On top of a motor, you might want an extra battery.
Stampede LiPo Battery
Don’t get caught without the power you need to reach further destinations than you ever thought possible. Invest in an additional LiPo battery as well as NiMH/LiPo chargers so you can keep your vehicle out on the road longer. When your current pack runs down, swap it out for a fully charged one and then place it into this dock. It’ll convert mains line power into potential DC energy that your Traxxas model can use in its efficient LiPo batteries.
Stampede VXL
The Stampede VXL uses the Velineon brushless power system, which can push these trucks to over 65 MPH if you’re using LiPo power. Both the XL-5 and VXL trucks include a tri-mode speed controller that offers an optional training mode for those who are just learning to control a model that has this kind of performance. No matter what kind of driver you are, there’s something to appeal to you in these kits.
If you’re still not sure what kind of 2WD Traxxas truck might be right for you, then contact us online at the RC Superstore for more information.
-
TRA2548
Traxxas 4x12mm Countersunk Machine Screws (100-degree) (6)
This is a pack of Traxxas 4x12mm Countersunk Machine Screws (100-degree). Each package includes six screws.Fits:1/10 Monster Jam TrucksBandit XL-5CraniacRustler XL-5SkullyStampede XL-5 2WD$150 -
TRA6868
Traxxas Slash 4X4 Progressive Shock Springs: Rear, +20% Rate, Blue (2)
These are the Traxxas Slash 4X4 Progressive Shock Springs: Rear, +20% Rate, Blue (2) Pair of XX-long progressive-rate springs are custom-wound to provide responsive control over small bumps, with a progressively stiffer rate to absorb hard landings...$650 -
GPM-SLA2W028-R
GPM Red Aluminum Front Shock Tower fits 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Red Aluminum Front Shock Tower for Traxxas Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel mounting...$1890 -
GPM-CRA028-R
GPM Red Aluminum Front Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Red Aluminum Front Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, Bandit, and Nitro Stampede trucks.This is a direct replacement for the stock Traxxas part 3639 shock tower.Accessory Part ForTraxxas 1/10...$999 -
RRP8720
Robinson Extra Hard 5mm Bore 20T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 20-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$849 -
TRA6774G
Traxxas 2.8 Talon Extreme Tires on Green Wheels for 2WD Electric Rear
These are the Traxxas electric Rustler & Stampede 2WD Rear Talon Extreme Tires Mounted on Green 2.8" Wheels with 12mm Hexes. These are set up for use on the REAR only. The tires come pre-glued to the wheels with foam inserts installed. Accessory Part...$2595 -
TRA3695
Traxxas Complete Transmission for 1/10 2WD Rustler, Bandit, Stampede, Slash
This is the Traxxas Complete Transmission for 1/10 2WD Rustler, Bandit, Stampede, and Slash trucks. This comes pre-assembled with internal gears, slipper clutch, and spur gears, making for an ultra-simply swap to get you back out racing or bashing...$7995 -
TRA1664T
Traxxas Hardened Steel Ti-Ni Shock Shafts (Long)
These are the Traxxas Hardened Steel Titanium-Nitride Coated Shock Shafts. These are an excellent upgrade for many Traxxas vehicles.Includes: Two shaftsSpecificationsDiameter: 3mm (0.118")Length: 47 mm (1.85")Thread: 3mm (0.118") Accessory Part ForHoss...$10 -
TRA2968
Traxxas LiPo Cell Voltage Checker/Balancer
This is the Traxxas LiPo cell voltage checker/balancer. This voltage checker and balancer requires the #2938X adapter if you are using it with Traxxas iD batteries.Use the LiPo battery checker to view individual LiPo cell voltages and overall...$2495 -
TRA1953
Traxxas Long Truck Half-Shaft Pro Pack (6): Slash
This is a set of the Traxxas Slash telescoping drive shafts (equivalent of dogbones or swing shafts). These are for use on Traxxas trucks. Includes: (6) sets of drive shafts (each set consists of an inside shaft wich slides in the outside...$10 -
RRP8718
Robinson Extra Hard 5mm Bore 18T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 18-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$899 -
RPM70942
RPM ESC Cage for Traxxas VXL-3s ESC 3355R (Black)
This is the RPM Black ESC Cage for the Traxxas 3355R VXL-3s ESC. RPM had numerous requests for an ESC Cage for the #3355R version of the Traxxas VXL-3S ESC since the mounting tabs have been reported to us as weak. Why risk potential damage to your $220...$779 -
RPM80514
RPM Green Long Rod Ends (12) for 1/10 Traxxas (Replaces TRA5525)
These are the RPM Green Long Rod Ends (12) for 1/10 Traxxas vehicles. These are direct replacements for TRA5525 rod ends.RPM Rod Ends cover a wide range of currently available Traxxas vehicles including all versions of the following: Slash 2wd, Slash...$749 -
RPM80527
RPM Pink Transmission Gear Cover for Slash Rustler Stampede Bandit
This is the RPM Pink Transmission Gear Cover for 1/10 Traxxas Slash 2WD XL-5 & VXL, Stampede 2WD XL-5 & VXL, Rustler 2WD XL-5 & VXL, and Bandit XL-5 & VXL buggies. This replaces Traxxas gear cover #3792. These covers are not recommended for use with...$529 -
TRA3636G
Traxxas Green Aluminum Steering Blocks - Slash Rustler Stampede Bandit
This is a pair of Traxxas Green 6061-T6 Aluminum Steering Blocks with Bearings for the Slash 2WD, Stampede 2WD, Rustler, Bandit, Nitro Slash vehicles.Features6061-T6 Aluminum ConstructionGreen anodized colorIncludes:Left and Right Steering BlocksFour...$2995 -
GPM-RUS003F-R
GPM Red Aluminum Front Bumper for 2WD Stampede Rustler Bandit
This is the GPM Racing Red Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...$999 -
HRATE1006SL
Hot Racing Blue Aluminum 12mm Clamping Wheel Hexes for Slash 2WD, Stampede 2WD, Rustler
These are the Hot Racing Blue Aluminum 12mm Clamping Wheel Hexes for the front and rear of Traxxas Slash 2WD, Stampede 2WD, and Rustler trucks. These will fit XL-5 brushed and VXL brushless versions.FEATURES:- CNC machined aluminum, anodized blue-...$1688 -
RCZTRA021
RC Screwz Traxxas Stampede XL-5 2WD Stainless Steel Screw Kit
This is the RC Screwz Traxxas Stampede XL-5 2WD Stainless Steel Screw Kit. RCScrewZ Stainless Screw Kits are the best way to beef up the hardware throughout your RC vehicle in one convenient package. Your new kit will include everything needed to do a...$2399 -
TRA3661
Traxxas Bigfoot No. 1 Classic Blue Pre-Painted Body with Decals
This is the Traxxas Bigfoot No. 1 Blue Pre-Painted Body with Decals, and the chrome accessory parts such as the Grille, Engine, and Roll Bar pieces. Whether your stock Bigfoot body is torn up, or you want to dress up an old Stampede with this fantastic...$7995 -
TRA3668A
Traxxas Rear All-Star Black Chrome Wheels w/ Talon Tires (2): Stampede VXL
This is a set of Rear Only 2.8" Mounted All Star Wheels and Tires for the electric Traxxas Stampede. FEATURES:2.8" All Star black chrome wheelsTalon tires with foam inserts INCLUDES:Two 2.8" mounted rear talon tires, All Star chrome wheels and foam...$2695 -
TRA2668
Traxxas Spring Retainers & Spacers for Big Bore Shocks
These are the Traxxas Big Bore Shock Upper and Lower Spring Retainers and 5 different thicknesses of spring pre-load spacers, from 1mm to 8mm. Replacement Big Bore Shock retainer set features upper and lower spring retainers (2), and spring pre-load...$550 -
TRA4974
Traxxas Wheelie Bar Arm: T-Maxx 3.3
This is the Wheelie Bar Arm for the T-Maxx 3.3. FEATURES:4 snap-in adjustment positions to control degree of wheelie action easily removable if additional control isn't neededConstructed of hardened plastic, black in color INCLUDES:Wheelie Bar Arm with...$10 -
GPM-CRA332F-BK
GPM Black Aluminum Front Bulkhead for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Black Aluminum Front Bulkhead for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, Bandit, Nitro Slash, Nitro Rustler, and Nitro Stampede trucks.This is a direct fit upgrade for the stock Traxxas part 2530A bulkheads...$1999 -
GPM-CRA332F-OR
GPM Orange Aluminum Front Bulkhead for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Orange Aluminum Front Bulkhead for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, Bandit, Nitro Slash, Nitro Rustler, and Nitro Stampede trucks.This is a direct fit upgrade for the stock Traxxas part 2530A bulkheads...$1999 -
GPM-CRA332F-R
GPM Red Aluminum Front Bulkhead for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Red Aluminum Front Bulkhead for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, Bandit, Nitro Slash, Nitro Rustler, and Nitro Stampede trucks.This is a direct fit upgrade for the stock Traxxas part 2530A bulkheads...$1999 -
TRA1275
Traxxas 20-Turn Stinger Performance 540 Motor (20T)
This is the Traxxas Stinger 20-Turn 540 size motor used in many Traxxas vehicles. This can be used in the Bandit XL-5, Stampede XL-5, Rustler XL-5, Monster Jam Replicas, Blast Boat, and others.Features:20-Turn high performance 540 motorPre-installed...$1895 -
TRA3737A
Traxxas Blue Aluminum 39mm Camber Link Turnbuckle Set
This is the Traxxas Blue Aluminum 39mm Camber Link Turnbuckle assembled with rod ends and hollow balls. Search our store for part 3741A for complete camber link set.Fits:1/10 Monster Jam TrucksBigfootCraniacNitro SlashRustler VXLRustler XL-5SkullySlash...$6 -
GPM-SLA2W028-BK
GPM Black Aluminum Front Shock Tower fits 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Black Aluminum Front Shock Tower for Traxxas Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel...$1890 -
RPM73759
RPM Red Front Bulkhead for Traxxas 2WD
This is the RPM Red Front Bulkhead for Traxxas 2WD trucks, including the Slash 2WD, Nitro Slash, Rustler, Nitro Rustler, Stampede 2WD, Skully, Craniac, Bigfoot, Nitro Stampede, and Bandit trucks and buggies.This part is a direct replacement for Traxxas...$899 -
TRA2546
Traxxas 4x15mm Countersunk Head Head Machine Screws (6)
This is a pack of Traxxas 4x15mm Countersunk Head Head Machine Screws. Each package includes six screws.Replacement part for these modelsBIGFOOT No. 1 Officially Licensed ReplicaDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150...$250 -
TRA4607
Traxxas Ball Bearings, 5x11x4mm: Nitro 4-Tec, Rustler, Stampede, Jato
This is the Traxxas 5x11x4mm Ball Bearing Set. This includes eight ball bearings. These are used in many of the Traxxas vehicles. FeaturesMade of Stainless steelShielded on both sides (not rubber sealed) Includes8 ball bearings Specs5mm...$24 -
TRA2074
Traxxas Servo Case & Gaskets for 2056 & 2075 Servos
This is the Traxxas 2074 Servo Case and Gasket Set for 2056 and 2075 Waterproof Servos. Replacement Part For 4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOTBlastChevrolet Corvette StingrayDrag SlashE-Revo VXL BrushlessFactory Five...$6 -
TRA8720
Traxxas Speed Bit Premium Large 1/4" Drive Handle with Rubber Overmold
This is the Traxxas Premium Large Rubber Overmold Speed Bit Handle with 1/4" Drive for use with Traxxas Speed Bit Metric Hex/Allen and Nut Driver tips. The large speed bit handle holds bits securely with an overmolded rubber grip to provide excellent...$1095 -
TRA2656T
Traxxas XX-Long Ti-Ni Hardened Steel Shock Shafts (2)
These are the Traxxas XX-Long Titanium-Nitride Coated Hardened Steel Shock Shafts. Each package includes two shocks shafts. These XX-long hardened steel shafts have a super tough titanium nitride coating with a micro-polished finish for smoother...$10 -
G3R-T1001-GREEN
Gen3 RC Green Aluminum Suspension Upgrade for Traxxas 1/10 2WD Slash Rustler Stampede
This is the Gen3 RC 6061-T6 Green Aluminum Stage 1 Upgrade Set for the Traxxas Rustler, Stampede 2WD, and Slash 2WD trucks. This set can be used on the XL-5 and VXL versions. Made of 6061-T6 aluminum, these parts are built to improve strength, look...$5399 -
GPM-RUS003F-OR
GPM Orange Aluminum Front Bumper for 2WD Stampede Rustler Bandit
This is the GPM Racing Orange Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...$999 -
PRO1017410
Pro-Line Badlands MX28 HP 2.8" Belted Tires on Raid 6x30 Adjustable Wheels 12mm Hex
This is a pair of Pro-Line Badlands MX28 HP 2.8" Belted Tires Pre-Mounted on Raid 6x30 Adjustable Offset Wheels with 12mm Hexes. These are the perfect option for vehicles like the Traxxas Stampede 2WD & 4x4, Rustler 2WD & 4x4, and Slash 2WD &...$5399 -
RPM73272
RPM ESC Cage for Sidewinder 3 for Slash 2WD, 4x4, Stampede, Rally, Rustler, Bandit
This is the RPM Black ESC Cage for Castle Sidewinder 3 and Sidewinder SCT ESCs. The RPM ESC Cage fits in the stock location on the Traxxas Slash 2WD, Slash 2WD LCG, Slash 4x4, Slash 4x4 LCG, Stampede 4x4, Rustler VXL, Bandit VXL, and 1/10 Rally, while...$749 -
RPM81167
RPM Pink Wide Front Bumper for Rustler Stampede Bandit
This is the RPM Pink Wide Front Bumper for Rustler 2WD, Stampede 2WD, Bandit, Nitro Sport, Nitro Stampede, and Nitro Rustler. On the electric versions, this works with both XL-5 brushed and VXL brushless trucks. This replaces Traxxas part TRA2735.Give...$519 -
TRA3767P
Traxxas Pink Aluminum Shock Caps (4) for all Ultra Shocks
This is the Traxxas aluminum (pink Anodized Shock Caps Shock caps, aluminum (pink-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined...$14