Traxxas Stampede 2WD XL-5 & VXL RC Trucks, Parts & Upgrades
Traxxas Stampede 2WD XL-5 VXL
Do you want something that’s race-ready yet still a great option for beginning model drivers or younger motorsports enthusiasts? If so, then you’re going to want the Stampede XL-5. It’s got a top speed of around 30 MPH measured in real rather than scale miles, so you can be sure that it’s going to offer a ton of real action without sacrificing a whole lot in terms of control.
In many ways, we consider the Traxxas Stampede line to be the original high-performance offload monster truck at the RC Superstore. Best of all, the stock performance figures of this vehicle can be upgraded through judicious use of aftermarket parts.
Traxxas Stampede 2WD Parts & Upgrades
While each of these models offers some serious scale horsepower, you’re eventually going to run into a situation where you might either want some replacement parts or you’re going to need to upgrade one of the underlying components. Perhaps you’ll want to start with a cooling fan or another component that includes comparable moving parts. Since these components rotate, you may want to keep a few extras on hand if you do any real hardcore driving. Motors themselves, however, are what most people are going to be looking into.
2WD Brushless Motors
Waterproof brushless motor assemblies are what makes the Stampede series so attractive. Motor brushes have to be periodically replaced on any design that makes use of them, but Stampede VXL brushless motor systems don’t require any such small parts to be installed. As a result, you can keep your vehicle running longer without having to worry about opening the physical motor housing and making adjustments. This is good news for anyone who wants to start investing in additional motors because they’re going to be seriously racing.
On top of a motor, you might want an extra battery.
Stampede LiPo Battery
Don’t get caught without the power you need to reach further destinations than you ever thought possible. Invest in an additional LiPo battery as well as NiMH/LiPo chargers so you can keep your vehicle out on the road longer. When your current pack runs down, swap it out for a fully charged one and then place it into this dock. It’ll convert mains line power into potential DC energy that your Traxxas model can use in its efficient LiPo batteries.
Stampede VXL
The Stampede VXL uses the Velineon brushless power system, which can push these trucks to over 65 MPH if you’re using LiPo power. Both the XL-5 and VXL trucks include a tri-mode speed controller that offers an optional training mode for those who are just learning to control a model that has this kind of performance. No matter what kind of driver you are, there’s something to appeal to you in these kits.
If you’re still not sure what kind of 2WD Traxxas truck might be right for you, then contact us online at the RC Superstore for more information.
-
GPM-CRA030-OR
GPM Orange Aluminum Rear Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Orange Aluminum Rear Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehiclesThis is a direct replacement for the stock Traxxas part 3638 shock tower.Accessory Part ForTraxxas 1/10 Monster Jam...$1699 -
HRACSG1827
Hot Racing 27-Tooth 48P Hardened Steel 1/8 Bore Pinion Gear
This is the Hot Racing 27-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerYOU WILL...$544 -
HRASSXS4680
Hot Racing Hardened Steel Pinion Gear Set - 24T 26T 28T 30T - 48P, 1/8 Bore
This is the Hot Racing Hardened Steel 48-Pitch 1/8" Bore Pinion Gear Set. This set includes a 24-tooth, 26-tooth, 28-tooth, and 30-tooth pinion gear.This set of gears is great for Traxxas Rustler XL-5, VXL, Stampede 2WD, Slash 2WD, HPI Savage XS, and...$1888 -
TRA2587
Traxxas 3x10mm Cap-Head Hex Machine Screws (6)
These are the Traxxas 3x10mm Cap-Head Hex Machine Screws. Each package includes six screws.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Monster Jam Trucks1/10 SummitBandit VXLBandit XL-5CraniacFunny CarRevo 3.3Rustler XL-5SkullySlayerSlayer...$250 -
TRA3621X
Traxxas Blue Front Bumper, Mount, and Hardware for Stampede 2WD Series
This is the Traxxas Blue Front Bumper, Mount, and Hardware for the Stampede 2WD, Craniac, Skully, and 1/10 Monster Jam Trucks.Fits1/10 Monster Jam TrucksCraniacSkullyStampede 2WD$5 -
TRA2382
Traxxas planet & Sungears, Shaft: N, NB, NRU,SLH
This is the Traxxas planet & Sungears, Shaft: N, NB, NRU,SLH$6 -
TRA3622R
Traxxas Stampede 2WD Main Chassis w/164mm Battery Compartment (use w/3626R ESC mount)
This is the Traxxas Stampede 2WD Main Chassis with a 164mm Battery Compartment. The 3626R ESC mount must be used with this chassis. Compatible With Stampede 2WD XL-5Stampede 2WD VXL$10 -
TRA6537
Traxxas Wire Retainer/Gear Cover w/Screws
This is the Wire Retainer/Gear Cover for use with many Traxxas vehicles using the TQi telemetry system, including the Bandit, E-Maxx, Rustler, Slash 2WD, Stampede 2WD, Stampede 4x4, and X-Maxx.FeaturesPlastic constructionBlack in colorIncludesWire...$3 -
GPM-SLA2W028-GS
GPM Gunmetal Aluminum Front Shock Tower fits 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Gunmetal Aluminum Front Shock Tower for Traxxas Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel...$1890 -
GPM-CRA028-OR
GPM Orange Aluminum Front Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Orange Aluminum Front Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, Bandit, and Nitro Stampede trucks.This is a direct replacement for the stock Traxxas part 3639 shock tower.Accessory Part ForTraxxas...$999 -
GPM-CRA055-OR
GPM Orange Aluminum Front Suspension Arms for 2WD Stampede Rustler Slash
These are the GPM Racing Orange Aluminum Front Suspension Arms for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Nitro Slash trucks.These are a direct fit upgrade for stock Traxxas part 3631 suspension arms.Accessory Part ForTraxxas 1/10...$1999 -
HRASTE872
Hot Racing Hardened Steel 72T 48P Spur Gear for Slash 2WD, Stampede 2WD, Rustler, Bandit
This is the Hot Racing Lightweight Hardened Steel 72-Tooth 48-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Telluride vehicles. This will fit XL-5 brushed and VXL brushless trucks. A larger pinion gear will be required on...$1988 -
HRASTE100MR128
Hot Racing Rear Multi-Rate Springs (3 Pairs) for Slash 2WD, Stampede 2WD, Rustler
These are the Hot Racing Rear Multi-Rate Springs (3 Pairs) for Slash 2WD, Stampede 2WD, Rustler. These work on the rear of the XL-5 brushed and VXL brushless versions of these trucks.FEATURES:- Spring steel construction- Multi-rate springs allow the...$988 -
RRP8716
Robinson Extra Hard 5mm Bore 16T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 16-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$849 -
RPM73765
RPM Blue ESC Cage for Castle Mamba X on Traxxas
This is the RPM Blue ESC Cage to use the Castle Mamba X ESC on Traxxas Slash 2WD, Slash 4x4, Stampede 4x4, and 1/10 Rally VXL. This can also be used on the Rustler, Stampede 2WD, and Bandit when the Traxxas 3725 mounting plate is on the vehicle (stock...$749 -
RPM82063
RPM Chrome Revolver 2.2" Wheels for Electric Rustler/Stampede Front, Nitro Rear
This is a pair of RPM Chrome Revolver 2.2" Wheels for front of the Traxxas Electric Rustler and Electric Stampede 2WD, or the rear of Traxxas nitro vehicles like the Jato, Nitro Rustler, Nitro Sport, and Nitro Stampede. This can also be used on the...$749 -
TRA5529
Shim Set (4): Jato
This is a Traxxas Jato 2.5 and 3.3 Shim Set. This includes four silver metal hollow balls and four 3mm silver washers. These are for adjusting the roll center of the truck.$350 -
TRA2336A
Traxxas Aluminum 61mm Turnbuckle Toe Links (Blue): Stampede VXL, XL-5
These are the Traxxas Blue Aluminum Turnbuckles with rod ends for the 1/10 Stampede XL-5 and VXL 2WD trucks.Traxxas aluminum turnbuckles make it easy to add strength and adjustability to your Traxxas model. These turnbuckles come in a brilliant...$12 -
TRA3656
Traxxas Bigfoot #1 Chrome Grill Set
This is the Traxxas Bigfoot #1 Chrome Grill Set with decals. Whether your grill is damaged, or you're painting a new body to restore your monster to its original glory, this is the set you need for a perfect match and fit. Replacement chrome BIGFOOT No...$10 -
TRA2592
Traxxas Buttonhead Screws 3x40mm (6)
These are the Traxxas Button Head 3x40mm Screws (6). Features: Metal construction Black in color Includes: Six 3x40mm buttonhead hex machine screws$3 -
TRA3652G
Traxxas Green Aluminum Stub Axle Carriers - Slash 2WD Rustler Stampede 2WD Bandit
This is a pair of Traxxas Green 6061-T6 Aluminum Stub Axle Carriers with Bearings for the Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles.Features6061-T6 aluminum constructionAnodized green in colorIncludesTwo Aluminum Rear Stub AxlesFour 5x11mm...$2995 -
TRA3645
Traxxas Toe-Link Turnbuckles 61mm (91mm to centers) for Stampede 2WD
This is a pair of Traxxas Toe-Link Turnbuckles (61mm turnbuckle, 96mm to centers of mounting holes) for the Traxxas Stampede 2WD trucks.FeaturesMetal and Nylon ConstructionSilver and Black in ColorAssembled w/Rod EndsIncludesTwo 61mm (96mm center to...$850 -
GPM-RUS030-B
GPM Blue Aluminum Rear Shock Tower fits 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Blue Aluminum Rear Shock Tower for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, and Bandit vehicles. These are machined from 6061-T6 aluminum and anodized with a beautiful finish. Mounting hardware is also included.This...$1699 -
PRO630831
Pro-Line Pro-Spec SC Assembled Rear Short Course Truck Shocks (2)
These are the Pro-Line Pro-Spec SC Assembled Rear Short Course Truck Shocks (2). These are a bolt-on upgrade for the rear of vehicles like the Traxxas 1/10 Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Rustler 2WD & 4x4, and Bandit.The next...$7299 -
RCZTRA067
RC Screwz Traxxas Stampede 2WD VXL Stainless Steel Screw Kit
This is the RC Screwz Traxxas Stampede 2WD VXL Stainless Steel Screw Kit. RCScrewZ Stainless Screw Kits are the best way to beef up the hardware throughout your RC vehicle in one convenient package. Your new kit will include everything needed to do a...$2699 -
TRA3621A
Traxxas Green Front Bumper, Mount, and Hardware for Stampede 2WD Series
This is the Traxxas Green Front Bumper, Mount, and Hardware for the Stampede 2WD, Craniac, Skully, and 1/10 Monster Jam Trucks.Fits1/10 Monster Jam TrucksCraniacSkullyStampede 2WD$5 -
TRA8716
Traxxas Speed Bit 2-Pc Ball End Hex Drivers 2.0mm 2.5mm, 1/4" Drive
This is the Traxxas Speed Bit 2-Piece Metric Ball Hex Driver Set with 1/4" drive. This set includes 2.0mm and 2.5mm ball end bits. The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard Traxxas Speed Bit...$2195 -
TRA8719
Traxxas Speed Bit 6-Pc 4-8mm Nut Driver Master Set with 1/4" Drive Premium Handle & Pouch
This is the Traxxas Speed Bit Master Set Metric 6-Piece Nut Driver Set with 1/4" Drive Premium Handle and Travel Pouch. Set Includes:4.0 mm Nut Driver4.5 mm Nut Driver5.0 mm Nut Driver5.5 mm Nut Driver7.0 mm Nut Driver8.0 mm Nut DriverPremium handle...$5995 -
GPM-RUS019-BK
GPM Black Aluminum Caster Blocks fits 2WD Stampede Rustler Slash
These are the GPM Racing Black Aluminum Caster Blocks for Traxxas electric Slash 2WD, Stampede 2WD, Rustler 2WD, and others vehicles listed below. Machined from 6061-T6 aluminum, these are a great way to add strength, tighten up handling, and dress up...$1399 -
GPM-RUS021-B
GPM Blue Aluminum Steering Blocks fits 2WD Stampede Rustler Slash Bandit
These are the GPM Racing Blue Aluminum Steering Blocks for Traxxas electric Slash 2WD, Rustler 2WD, Stampede 2WD, Bandit, and Nitro Slash vehicles. Made from 6061-T6 aluminum and anodized with a color finish, these are durable and look great.These are...$1590 -
GPM-CRA028-GS
GPM Gunmetal Aluminum Front Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Gunmetal Aluminum Front Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, Bandit, and Nitro Stampede trucks.This is a direct replacement for the stock Traxxas part 3639 shock tower.Accessory Part ForTraxxas...$999 -
GPM-RUS030-R
GPM Red Aluminum Rear Shock Tower fits 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Red Aluminum Rear Shock Tower for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, and Bandit vehicles. These are machined from 6061-T6 aluminum and anodized with a beautiful finish. Mounting hardware is also included.This...$1699 -
PRO1019010
Pro-Line Hyrax 2.8" Tires on Raid Removable Hex Wheels
This is a pair of pre-mounted Pro-Line Hyrax 2.8" Tires on Raid Removable Hex Wheels. Pro-Line is very excited to announce the Hyrax 2.8" tire pre-mounted to the Raid Black 6x30 Removable Hex wheel! We take the guesswork out of your glue job by doing the...$4799 -
TRA2662
Traxxas Big Bore Hard Anodized Shocks (XX-Long) (2) (Rear)
This is the Traxxas Big Bore Hard Anodized Shocks (XX-Long) (2) (Rear) Set of two XX-long Big Bore shocks provide ultimate dampening control. They’re formed from hard-anodized, PTFE-coated, aluminum with titanium-nitride (TiN) coated shafts for...$2695 -
TRA3631G
Traxxas Green HD Front Suspension Arms for 2WD Slash Rustler Stampede
This is the Traxxas Green HD Front Suspension Arms for 2WD Slash Rustler Stampede. Heavy-duty suspension arms for 2WD Slash, Stampede, and Rustler incorporate our latest proprietary composite material. Traxxas designed this composite...$10 -
TRA3697
Traxxas LED Light Set Complete w/Front & Rear Bumpers with LED lights: Bigfoot 2WD
This is the Traxxas LED Light Set Complete with Front & Rear Bumpers with LED Lights & BEC Y-harness for the 2WD Bigfoot. Traxxas LED light kits are built tough, with factory fit and finish for easy installation. Designed specifically for the...$3995 -
TRA6516
Traxxas TQ 2.4GHz 2-Channel Transmitter
This is the Traxxas TQ 2.4GHz 2-Channel Transmitter. (Transmitter Only) Stock replacement transmitter for many Traxxas vehicles. 1/16 E-Revo1/16 Slash 4WD1/16 Summit4-Tec 2.0 AWD ChassisBanditBIGFOOTBlastChevrolet Corvette...$5995 -
TRA3678T
Traxxas Wheelie Bar, Assembled (Orange)
This is the Traxxas Wheelie Bar, Assembled (Orange)The patented Traxxas adjustable wheelie bar features four-position adjustment to control the height of your wheelies. Durable composite nylon construction offers an extra level of protection for the...$15 -
TRA3678R
Traxxas Wheelie Bar, Assembled (Red)
This is the Traxxas Wheelie bar, Assembled (Red)The patented Traxxas adjustable wheelie bar features four-position adjustment to control the height of your wheelies. Durable composite nylon construction offers an extra level of protection for the motor...$15 -
TRA2263
Traxxas Y-Harness: BEC to LED Light Set
This is the Traxxas Y-Harness: BEC to LED Light Set. Replacement Part forBanditBigfootRustlerSlashSlash 4x4Stampede Stampede 4x4 Accessory Part forBandit VXLRustler 4x4 VXLRustler VXLSlash 4x4 UltimateSlash 4x4 VXLSlash VXLStampede 4x4 Unassembled...$4