Traxxas Slash 4X4 RC Truck, Parts & Upgrades
Traxxas Slash 4x4 Is Built For Performance
The Traxxas Slash 4×4 is built for a streamlined performance through dirt, mud, snow or on concrete. Each is ready to race and also works well with upgrades. With the painted and decaled body, the Slash will look great while tearing up the road. Each is fully assembled and ready with pre-glued tires so that you can get started with the races once the vehicle arrives at your home.
Each Traxxas Slash uses TQi 2.4GHz for an excellent range and steady radio communication. The TQi transmitter included with the Slash 4×4 Ultimateconnects with Androids and Apple products including iPads and iPhones. Pull up a dashboard on your smart device to view speed, RPM, and motor temperature. Sealed on-board electronics ensure that no water will get into your servo or receiver.
Our Short Course Truck Recommendations
Each Slash 4×4 VXL truck comes with the Traxxas Stability Management which will help you navigate slippery courses in any weather condition. Your truck will rear back onto the track if it slips out of control and keep going. Have faith that you can finish the next race while keeping an eye on the rest of the pack. Experiment with various batteries to ensure that you maintain adequate power for your race track.
Traxxas Slash 4x4 VXL
Are you ready for the power of a brushless motor? Try out the Traxxas Slash 4×4 VXL Brushless RTR Short Course RC Truck w/TSM. This model is available in several race replica body styles, as well as the White Fox Racing Edition, which makes for a sleek design. You will tear up the road with these aesthetics.
The Traxxas Slash 4×4 VXL Brushless RTR Truck LIPO COMBO PACKAGE comes with a LiPo battery and charger. You get an extended runtime, which is great for when you have longer racecourses or extra time to bash at the skate park. Try our different battery packs if you want to increase your speed, or adjust your oil in your shocks to suit your driving style or racecourse.
How The Traxxas Slash 4×4 Sets The Standard
The Traxxas Slash VXL is built for the short course. When you need a car that handles twists and turns at a rapid speed, then this truck is the right one for you. You get top-notch support in the truck’s structure and ample power for the road. The chassis design is built for speed and to navigate obstacles more easily.
You can go more than sixty miles per hour with the Velineon brushless power motors. The best part is that the motor is low-maintenance. Harness your speed so that you can win that race. TSM-rated tires are built to handle the extra pressure so you won’t have to worry about replacing them too soon.
Find Your Traxxas Slash 4×4 Truck, Parts, and Upgrades At RC Superstore
RC Superstore wants to deliver the best models for your RC vehicle hobby. We love introducing beginners to the best cars and providing parts for those who want to upgrade or maintain their machines. We offer rewards points on purchases so that you can get the best deals on cars, boats, and parts.
Contact us today to find out what vehicle will suit your need for speed. RC Superstore’s customer service will go the extra mile to ensure that you are satisfied with your vehicle.
-
GPM-SSLA1280FHA-BGPM Blue Stainless Steel & Aluminum Front CVD Driveshaft Set w/Hex for 4x4 Slash Rustler Stampede Rally
This is the GPM Racing Blue Stainless Steel and Aluminum Front CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints, with the main...$3690 -
TRA6747Traxxas Gear, 11-T pinion (32-p) (mach. steel)/ set screw
This is the Traxxas Gear, 11-T pinion (32-p) (mach. steel)/ set screw. 11-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can...$350 -
TRA3946XTraxxas 16-Tooth 32P Machined Hardened Steel Pinion Gear w/Set Screw
This is the Traxxas 16-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...$595 -
TRA3944XTraxxas 14-Tooth 32P Machined Hardened Steel Pinion Gear w/Set Screw
This is the Traxxas 14-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...$595 -
RPM73562RPM Black Front LCG Bulkhead for Slash 4x4 & 1/10 Rally & Rustler 4x4
This is the RPM Black Front Low-CG Bulkhead for Traxxas Slash 4x4 Ultimate, 1/10 Rally, and Slash 4x4 trucks with the low-CG conversion. Adding these to your truck will increase durability and simplify maintenance due to the two-piece design.Designed...$949 -
TRA3641ATraxxas Front & Rear Camber Link Set: Rustler, Stampede
These are Traxxas Non-Adjustable Front and Rear Camber Links for the Rustler and Stampede XL editions. Features: Gray plastic construction Includes: Two short links, Two long links Specifications:ShortLength: 77 mm (3.03")Width: 9 mm...$3 -
GPM-RUS4012-BGPM Aluminum Front Gearbox for 4x4 Slash Rustler Stampede (Blue)
This is the GPM Racing Blue Aluminum Front Gearbox for Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and XO-1 vehicles. Made of 6061-T6 aluminum, these are super rigid and prevent flex that can lead to damaged differential gears. They look...$4990 -
GPM-SLA102R-BK-ORGPM Black Aluminum Rear Shocks for 4x4 Slash Rustler Stampede
These are the GPM Racing Black Aluminum Rear Shocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, and Stampede 4x4 trucks. Made of 6061-T6 aluminum and with a monster 4mm shock shaft, these shocks are built to last. They include three full spring sets (1...$2390 -
MIP18140MIP X-Duty Rear CVD Drive Kit for Slash/Stampede 4x4, Stampede/Rustler VXL
This is the MIP X-Duty Rear CVD Drive Kit for the 1/10 Slash 4x4, Stampede 4x4, Rally VXL, Stampede VXL 2WD and Rustler VXL 2WD, Nitro Stampede, and Nitro Rustler.Includes2 - MIP Confetti Sticker, 2.185 x .65 Black1 - MIP Lube & Thread Gel Cup1 - MIP...$5699 -
HRATRX15GSHot Racing Carbon Fiber Slipper Clutch Pads - Use in place of Traxxas 5352 or 5552
These are the Hot Racing Carbon Fiber Stock Length Slipper Clutch Pads, for use in place of Traxxas 5352 or 5552 slipper pads. These fit Traxxas Bandit, E-Maxx, E-Revo, Jato 3.3, Rally VXL, Revo 3.3, Rustler, Slash 2WD, Slash 4X4, Slayer Pro 4X4,...$748 -
RPM73272RPM ESC Cage for Sidewinder 3 for Slash 2WD, 4x4, Stampede, Rally, Rustler, Bandit
This is the RPM Black ESC Cage for Castle Sidewinder 3 and Sidewinder SCT ESCs. The RPM ESC Cage fits in the stock location on the Traxxas Slash 2WD, Slash 2WD LCG, Slash 4x4, Slash 4x4 LCG, Stampede 4x4, Rustler VXL, Bandit VXL, and 1/10 Rally, while...$749 -
TRA2669Traxxas Big Bore Shock Piston Head Set & Mounting Bushings
This is the Traxxas Big Bore Shock Piston Head Set with Mounting Bushings. This set includes two 2-hole pistons, two 3-hole pistons, two shock mounting bushings, and two washers.Includes2- Pistons (2-hole)2- Pistons (3-hole)2- Shock Mounting Bushings2-...$250 -
TRA2362Traxxas Shock Rebuild Kit (2): T-Maxx & E-Maxx Shocks
This is a shock rebuild kit for 2 Traxxas black plastic shocks. Includes:4 E-clips2 C-clips2 O-rings8 Washers2 Diaphrams Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisChevrolet Corvette StingrayFord F-150 Raptor R 4X4Ford Fiesta ST...$250 -
TRA6879RTraxxas Machined Spiral Cut Differential Ring & Pinion Gears (Rear)
This is the Traxxas Differential ring gear, pinion gear, (machined spiral cut) (rear) Spiral-cut 37-tooth ring and 13-tooth pinion differential gear sets are CNC-machined from a solid block of steel. The teeth are cut with a slight curve to minimize...$3995 -
TRA1747PTraxxas Pink Aluminum 4mm Flanged Wheel Nuts (4)
These are the Traxxas Pink Aluminum 4mm Flanged Wheel Nuts (4). These wheel nuts fit a wide variety of Traxxas vehicles. Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The...$750 -
HRASLF311EHot Racing Front & Rear Sway Bar Set for Slash 4x4 & 1/10 Rally
This is the Hot Racing Front and Rear Sway Bar Set for Traxxas Slash 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles.FEATURES:Adjustable spring steel sway bar wire.YOU WILL RECEIVE:One Set of Front and rear Sway Bars WireTwo med chrome anti-roll bars.Four...$1388 -
TRA2743Traxxas 3mm Hardened Set / Grub Screws (12)
This is a set of Traxxas 3mm Hardened Set Screws, also known as grub screws. Each package includes 12 set screws. Set of twelve 3 mm hardened steel grub screwsReplacement part for these models1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBanditDCB...$3 -
TRA6520Traxxas RPM Sensor (Long) 3x4mm BCS
This is the Long RPM Sensor from Traxxas. The RPM sensor plugs directly into your TQi receiver to provide real-time speed and RPM data while you drive. Real-time telemetry requires a telemetry magnet, TQi radio with Traxxas Link Wireless...$12 -
RPM80402RPM Black Shock Shaft Guards for Traxxas Slash 2WD, 4x4, Rally, Stampede, Rustler, Bandit
These are the RPM Black Shock Shaft Guards for the Traxxas 1/10 Slash 2WD, Slash 4x4, Stampede, Rustler, Bandit, and 1/10 Rally vehicles. These do not fit vehicles using GTR shocks, so they will not work on Slash 4x4 Ultimate trucks.Rocks, dirt and...$849 -
GPM-SSLA1277RHA-BGPM Blue Stainless Steel & Aluminum Rear CVD Driveshaft Set w/Hex for 4x4 Slash Rustler Stampede & 2WD Slash
This is the GPM Racing Blue Stainless Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints, with...$3690 -
GPM-SLA022-BGPM Blue Aluminum Rear Stub Axle Carrier for 4x4 Slash Rustler Stampede Rally
These are the GPM Racing Blue Aluminum Rear Stub Axle Carriers for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, Telluride, and others (see below). Made of 6061-T6 aluminum and anodized for a spectacular finish, these are a great way to...$2190 -
TRA6877ATraxxas Cover, gear (clear)
This is the Traxxas Cover, gear (clear) The crystal-clear plastic gear cover is just as durable as the stock cover, but lets you see the gear mesh for easy, no-tool inspection. Also an accessory for showing off the optional 6860R aluminum motor mount...$450 -
TRA3762ATraxxas 3762A XX-Long Grey Ultra Shocks (2)
This is a pair of the Traxxas XX-Long Ultra Shocks (part 3762A) for use on a wide variety of Traxxas vehicles, including the Bandit, Rustler, Stampede 2WD & 4x4, Slash, Hoss, T-Maxx, and more. Traxxas oil-filled Ultra Shocks utilize X-rings for a...$18 -
GPM-RUS4102R-G-ORGPM Aluminum Rear Adjustable Shocks for 4x4 Slash Rustler Stampede (Green)
These are the GPM Racing Green Aluminum Adjustable 102mm Rear Shocks for Traxxas Slash 4x4, Rustler 4x4, and Stampede 4x4 trucks. Made of 6061-T6 aluminum, with a beefy 4mm steel shock shaft, these are a great upgrade for bashers and show trucks alike. ...$2390 -
GPM-SLA025TSH-BGPM Blue Aluminum Adjustable 25T Servo Horn for 4x4 Slash Stampede Rustler Rally
This is the GPM Racing Blue Aluminum Adjustable 25T Spline Locking Servo Horn for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and 1/10 Rally vehicles. Made of 6061-T6 aluminum, these are strong and look great!Installation notes: The included...$790 -
GPM-SSLA1200-BKGPM Black Hardened Steel Diff Gear Set for 4x4 Slash Stampede Rustler Rally XO-1
This is the GPM Racing Black Hardened Steel Differential Gear Set for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, 1/10 Rally, and XO-1 vehicles. These can be used as a drop-in upgrade to beef up the drivetrain in your vehicle.This gear set is a...$2990 -
GPM-SSLA1280FH-RGPM Red Steel & Aluminum Front CVD Driveshaft Set w/Hex for 4x4 Slash Rustler Stampede
This is the GPM Racing Red Steel and Aluminum Front CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature steel axles and CVD joints, with the main shaft made of...$3390 -
TRA3947XTraxxas 17-Tooth 32P Machined Hardened Steel Pinion Gear w/Set Screw
This is the Traxxas 17-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...$595 -
TRA3018RTraxxas XL-5 ESC Waterproof Electronic Speed Control w/LVD
This is the Traxxas XL-5 Waterproof Electronic Speed Control (ESC). This comes pre-wired with the Traxxas high-current connector. Designed and engineered by Traxxas, the XL-5 Electronic Speed Control handles the elements while smoothly supplying power...$5995 -
TRA6837XTraxxas Blue Aluminum Steering Blocks Slash 4x4, Stampede 4x4, Rally
These are Traxxas Aluminum Left and Right Steering Blocks for the 1/10 scale Slash 4x4, Stampede 4x4, Telluride, and 1/10 Rally vehicles. Precision-machined for total steering accuracy and bulletproof strength, Traxxas Aluminum Steering Blocks further...$2695 -
PRO1024811Pro-Line Mirage TT 2.2"/3.0" BELTED SC Tires Mounted on Raid Black 6x30 Removable Hex (12mm & 14mm) Wheels (2)
This is the Pro-Line Mirage TT 2.2"/3.0" BELTED SC Tires Mounted on Raid Black 6x30 Removable Hex (12mm & 14mm) Wheels (2) Pro-Line is proud to announce a tire and wheel combo for your Short Course Desert Truck! The Mirage TT is inspired by full-size...$3999 -
GPM-SLA055-GGPM Green Aluminum Lower Suspension Arm for Front/Rear 4x4 Slash Stampede, Rear of 2WD Stampede & Rustler
These are the GPM Racing Green Aluminum Lower Suspension Arms for the Front or Rear of the Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, XO-1, or the rear of the Stampede 2WD and Rustler 2WD vehicles. These are made of 6061-T6 aluminum for improved...$2390 -
GPM-SSLA1278FRPP-OCGPM Joint Rebuild Kit for SSLA1277RH & SSLA1280FH CVD Driveshaft Sets
This is the GPM Joint Rebuild Kit for SSLA1277RH & SSLA1280FH CVD Steel Driveshaft Sets. Each pack rebuilds two joints. Includes Steel Pin 2x11.7 - 2pcsSpring Coil - 2pcsBlack Collar - 2pcs$250 -
GPM-SSLA1277A/JT-OCGPM Stainless Steel Replacement Stub Axle & CVD for SSLA1277RHA Driveshafts
This is a GPM Stainless Steel Replacement Stub Axle and CVD for SSLA1277RHA Driveshafts. *Joint replacement for GPM Racing #SSLA1277RHA only IncludesJoint - 1pcHex - 1pc3x3 Screw Shaft - 1pc$4 -
GPM-SLA021-RGPM Red Aluminum Front Steering Blocks for 4x4 Slash Rustler Stampede Rally
These are the GPM Racing Red Aluminum Front Steering Blocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and Telluride vehicles. These are made of 6061-T6 aluminum and anodized for a beautiful finish.These are an upgraded replacement for...$2390 -
TRA5119ATraxxas 10x15x4mm Black Rubber Sealed Ball Bearings (2)
This is a Pair of 10x15x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate protection and less maintenance in dirty environments.Includes: Two 10x15mm Ball...$7 -
TRA1664Traxxas Long Steel Shock Shafts w/Chrome Finish (2)
This is a pair of Traxxas Long Steel Shock Shafts with Chrome Finish. These are used in a large number of Traxxas vehicles. Replacement steel shock shafts with chrome finish for Traxxas long Ultra Shocks (2) Replacement Part ForBandit VXLBanditBIGFOOT No...$3 -
GPM-RUS4012-SGPM Aluminum Front Gearbox for 4x4 Slash Rustler Stampede (Silver)
This is the GPM Racing Silver Aluminum Front Gearbox for Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and XO-1 vehicles. Made of 6061-T6 aluminum, these are super rigid and prevent flex that can lead to damaged differential gears. They...$4990 -
GPM-SLA201F/RN-BGPM Blue Aluminum Rear Body Mount Posts for Slash 4x4 Fr/Rr & Stampede 4x4 Rear
This is the GPM Racing Blue Aluminum Rear Body Mount Post for Traxxas 1/10 Slash 4x4 (front or rear) and Stampede 4x4 (rear) trucks. Made of 6061-T6 aluminum with an anodized finish, these are durable and look great!These can be used in place of the...$1990 -
TRA3948XTraxxas 18-Tooth 32P Machined Hardened Steel Pinion Gear w/Set Screw
This is the Traxxas 18-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...$595