Traxxas Slash 4X4 RC Truck, Parts & Upgrades
Traxxas Slash 4x4 Is Built For Performance
The Traxxas Slash 4×4 is built for a streamlined performance through dirt, mud, snow or on concrete. Each is ready to race and also works well with upgrades. With the painted and decaled body, the Slash will look great while tearing up the road. Each is fully assembled and ready with pre-glued tires so that you can get started with the races once the vehicle arrives at your home.
Each Traxxas Slash uses TQi 2.4GHz for an excellent range and steady radio communication. The TQi transmitter included with the Slash 4×4 Ultimateconnects with Androids and Apple products including iPads and iPhones. Pull up a dashboard on your smart device to view speed, RPM, and motor temperature. Sealed on-board electronics ensure that no water will get into your servo or receiver.
Our Short Course Truck Recommendations
Each Slash 4×4 VXL truck comes with the Traxxas Stability Management which will help you navigate slippery courses in any weather condition. Your truck will rear back onto the track if it slips out of control and keep going. Have faith that you can finish the next race while keeping an eye on the rest of the pack. Experiment with various batteries to ensure that you maintain adequate power for your race track.
Traxxas Slash 4x4 VXL
Are you ready for the power of a brushless motor? Try out the Traxxas Slash 4×4 VXL Brushless RTR Short Course RC Truck w/TSM. This model is available in several race replica body styles, as well as the White Fox Racing Edition, which makes for a sleek design. You will tear up the road with these aesthetics.
The Traxxas Slash 4×4 VXL Brushless RTR Truck LIPO COMBO PACKAGE comes with a LiPo battery and charger. You get an extended runtime, which is great for when you have longer racecourses or extra time to bash at the skate park. Try our different battery packs if you want to increase your speed, or adjust your oil in your shocks to suit your driving style or racecourse.
How The Traxxas Slash 4×4 Sets The Standard
The Traxxas Slash VXL is built for the short course. When you need a car that handles twists and turns at a rapid speed, then this truck is the right one for you. You get top-notch support in the truck’s structure and ample power for the road. The chassis design is built for speed and to navigate obstacles more easily.
You can go more than sixty miles per hour with the Velineon brushless power motors. The best part is that the motor is low-maintenance. Harness your speed so that you can win that race. TSM-rated tires are built to handle the extra pressure so you won’t have to worry about replacing them too soon.
Find Your Traxxas Slash 4×4 Truck, Parts, and Upgrades At RC Superstore
RC Superstore wants to deliver the best models for your RC vehicle hobby. We love introducing beginners to the best cars and providing parts for those who want to upgrade or maintain their machines. We offer rewards points on purchases so that you can get the best deals on cars, boats, and parts.
Contact us today to find out what vehicle will suit your need for speed. RC Superstore’s customer service will go the extra mile to ensure that you are satisfied with your vehicle.
-
RPM80709RPM Red Front/Rear A-Arms for Traxxas Slash 4x4, Rustler 4x4, Hoss 4x4 and Stampede 4x4
These are the RPM Red Front or Rear Suspension A-Arms for Traxxas Slash 4x4, Rustler 4x4, Hoss 4x4, Stampede 4x4, and 1/10 Rally VXL cars and trucks.RPM A-arms for the Traxxas Slash 4x4 , Rustler 4x4 Hoss 4x4 and Stampede 4x4 are everything you've come...$879 -
TRA2742Traxxas Long Rod Ends & Hollow Ball Connectors (6)
This is a set of Traxxas Long Rod Ends with Hollow Ball Connectors. Each package contains six rod ends and six hollow balls.Fits1/10 Monster Jam Trucks1/10 RallyBandit XL-5CraniacE-MaxxNitro 4-TecNitro RustlerNitro SlashNitro SportNitro StampedeRustler...$4 -
TRA6535Traxxas Temperature Sensor Mount for Electric Motors
This is the Traxxas Temperature Sensor Mount for Electric Motors when using the TQi Telemetry System. Includes: Mount, Plastic Tie, and Thermal Pad The temperature sensor mount secures the temperature sensor to your electric motor with a thermal pad and...$3 -
TRA5351Traxxas Slipper Pressure Plate and Hub: Revo 3.3, E-Revo, E-Maxx
This is the Traxxas Alloy Slipper Pressure Plate and Hub for the Revo 2.5, 3.3, E-Revo, E-Revo Brushless, E-Maxx 16.8V, and E-Maxx Brushless trucks. These are part of the slipper assembly.$8 -
GPM-SLA019A-BGPM Blue Aluminum Front Caster Blocks for 4x4 Slash Rustler Stampede Rally XO-1
These are the GPM Racing Blue Aluminum Front Caster Blocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and XO-1 vehicles. Made of 6061-T6 aluminum and anodized for a spectacular finish, these feature bearing-supported kingpins for...$2890 -
GPM-SLA087F-B-ORGPM Blue Aluminum Front Shocks for 4x4 Slash Rustler Stampede
These are the GPM Racing Blue Aluminum Front Shocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, and Stampede 4x4 trucks. Made of 6061-T6 aluminum and with a monster 4mm shock shaft, these shocks are built to last. They include three full spring sets (1...$2390 -
TRA6843Traxxas Spur Gear, 52 tooth, 32 pitch: Slash 4 x 4
This is a Traxxas M0.8P, 52T Spur Gear. FEATURES M0.8 pitch 52 tooth Black plastic construction Compatible with 32P pinion gears INCLUDESOne M0.8P, 52T Spur Gear SPECSPitch: M0.8Tooth: 50Outer Diameter: 43mm (1.69")Inner...$3 -
TRA3351RTraxxas Velineon 3500 4-Pole Brushless Motor (Waterproof)
This is the Traxxas Velineon 3500 4-Pole Brushless Waterproof Motor. This is the replacement motor found in many of the 1/10 brushless trucks, designed for use with the VXL-3s ESC. See full list of compatible trucks below.The Velineon 3500 Brushless...$9995 -
TRA6888Traxxas Center Rear Drive Hub for 4x4 Slash Rustler Stampede XO-1
This is the Traxxas Rear Center Drive Hub and Set Screw for 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, Telluride, and XO-1 vehicles. Rear center drive hub with 4x3 mm grub screw.$5 -
TRA6837ATraxxas Orange Aluminum Steering Blocks
These are the Traxxas 6061-T6 Orange Aluminum Steering Blocks for 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, and Rally vehicles. Traxxas aluminum steering blocks combine total steering accuracy with bulletproof strength. Machined from solid 6061-T6...$2695 -
TRA6832ATraxxas Orange Aluminum Caster Blocks for 4x4 Slash Stampede Rustler
These are the Traxxas 6061-T6 Orange Aluminum Caster Blocks for 4x4 Slash Stampede Rustler. Left and right orange aluminum caster blocks improve the appearance, ruggedness, and control of your Traxxas model. The billet 6061-T6 aluminum construction adds...$3995 -
TRA1952TTraxxas Orange Aluminum Rear Stub Axle Carriers (2)
This is the Traxxas Orange Aluminum Rear Stub Axle Carriers (2) Traxxas aluminum stub axle carriers add the strength of 6061-T6 alloy with a beautifully-anodized finish without compromising their track-bred suspension geometry. The complete installation...$2595 -
HRATRX15GSLHot Racing Carbon Fiber Long Slipper Clutch Pads - Use in place of Traxxas 5352 or 5552
These are the Hot Racing Carbon Fiber Long Slipper Clutch Pads with 25% more surface area than stock pads, for use in place of Traxxas 5352 or 5552 pads. These fit Traxxas Bandit, E-Maxx, E-Revo, Jato 3.3, Rally VXL, Revo 3.3, Rustler, Slash 2WD, Slash...$888 -
TRA3956RTraxxas 54T 0.8 Mod Spur Gear for Center Differential in Slash / Stampede 4x4
This is the Traxxas 54-Tooth 0.8 Mod Spur Gear for use with Center Differentials in the Slash 4x4, Stampede 4x4, and 1/10 Rally vehicles. These are 0.8 metric pitch, compatible with 32-pitch. The 54-tooth spur gear (32-pitch) fits the 6814 center...$3 -
HRASLF311Hot Racing Adjustable Front & Rear Sway Bar Kit for Slash 4x4 & 1/10 Rally
This is the Hot Racing Adjustable Front and Rear Sway Bar Kit for Traxxas Slash 4x4, Stampede 4x4, 1/10 Rally VXL, and Telluride trucks.FEATURES:- Adjustable spring steel sway bar wire- A set of three sway bars for a wider range of adjustment to suit the...$2499 -
TRA3739Traxxas Hinge Pin Screw Set for Slash Rustler Stampede Bandit
This is the Traxxas Hinge Pin Screw Set for the Slash 2WD, Slash 4x4, Rustler, Stampede 2WD, and Bandit vehicles.Includes:Two 3mm x 46mm screw pinsTwo 3mm x 40mm screw pinsTwo 3mm x 29mm screw pinsTwo 2mm x 27mm screw pinsTwo 2mm x 24mm screw...$450 -
TRA2280Traxxas 600 Brushless Digital High-torque Metal Gear Ball Bearing Waterproof Servo
This is the Traxxas 600 Brushless Digital High-torque Metal Gear Ball Bearing Waterproof Servo High-Torque 600 Brushless Digital ServoThe Traxxas High-Torque 600 brushless servo is the ultimate steering upgrade for your 1/10 or 1/8 scale vehicle. With...$15995 -
GPM-SLA035-BGPM Blue Aluminum Slipper Eliminator & Bearing Adapter for 4x4 Slash Stampede Rustler Rally
This is the GPM Racing Blue Aluminum Slipper Clutch Eliminator and Bearing Adapter for Traxxas 1/10 Slash 4x4, Stampede 4x4, 1/10 Rally, and Rustler 4x4 trucks. This part eliminates any power loss or slippage from the slipper clutch, giving you instant...$890 -
TRA2250Traxxas 330 Digital High Torque Coreless MG Ball Bearing Waterproof Servo
This is the Traxxas 330 Digital High-Torque Coreless Metal Gear Ball Bearing Waterproof Servo, with an output of up to 330 oz/in of torque.High-Torque 330 Blue ServoThe Traxxas High-Torque 330 Blue servo combines maximum steering authority with a long...$7995 -
TRA3931Traxxas Flat-Head Hex Drive Machine Screws 3x8mm (6)
These are the Traxxas Flathead 3x8mm Hex Drive Screws. Features: Metal construction Black in color Includes: Six 3x8mm Flathead Hex Screws$250 -
TRA2542Traxxas Screws 4x12mm (6) Countersunk: VXL
These are the Traxxas Countersunk 4 x 12mm Screws. Features:Metal constructionBlack in color Includes: Six 4 x 12mm Countersunk Flathead Hex Screws$250 -
TRA3642Traxxas Shock Mounting Shoulder Screw
This is a Package of 3x12x5mm Shoulder Screws for many Traxxas Vehicles. Set of six 3x12 mm shoulder screws (shock attachment screws) with Phillips-drive heads. SPECSLength: 12mm (.47")Diameter: 3mm (.12")Thread Length: 5mm (.20") Replacement Part...$3 -
GPM-RUS4036-BGPM Blue Aluminum Motor Mount for Rustler 4x4 & Slash 4x4 LCG
This is the GPM Racing Blue Aluminum Motor Mount for use in Traxxas Rustler 4x4 and Slash 4x4 low-CG chassis trucks. This will also fit the Traxxas 1/10 Rally cars. Made of 6061-T6 aluminum, this reduces flex and looks great. Stainless steel hardware...$1799 -
TRA5148Traxxas White Lithium Grease
This is a Tube of White Lithium Grease from Traxxas. This product can be used to lubricate parts, such as gears. FEATURES Great lubrication for nylon gears INCLUDESOne tube of lithium grease (volume unknown) REQUIRESApplication to parts needing...$3 -
TRA6753Traxxas Rear Steel-Splined Constant-Velocity Stub Axle (1)
This is the Traxxas Stub axle, rear, steel-splined constant-velocity (1)Replacement rear stub axle for Traxxas steel CV driveshafts (1951R, 6852R)Accessory Part For:BIGFOOTHoss 4X4 VXLNitro RustlerRustler 4X4 VXLRustler 4X4Rustler VXLRustlerSlash 2WD...$750 -
TRA6851RTraxxas Steel Front Driveshafts: Slash 4x4, Rally, Stampede 4x4
These are the Traxxas Hardened Steel Front Driveshafts for the Traxxas 1/10 Scale Slash 4x4, Rally, and Stampede 4x4 vehicles. Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints...$6995 -
HRATRX15GX06Hot Racing Small Super Duty Slipper for Slash, Stampede, Rustler, Bandit, Jato
This is the Hot Racing Small Super Duty Slipper System with Pressure Plate, Hub, and Friction Pad for Slash 2WD, Slash 4x4*, Stampede 2WD, Rustler, Bandit, 1/10 Rally VXL*, Jato 3.3, and Stampede 4x4*. This will work on XL-5 brushed and VXL brushless...$2888 -
TRA6842Traxxas Spur Gear, 50 tooth, 32 pitch: Slash 4 x 4
This is a Traxxas M0.8P, 50T Spur Gear. FEATURES M0.8 pitch 50 tooth Black plastic construction Compatible with 32P pinion gears INCLUDESOne M0.8P, 50T Spur Gear SPECSPitch: M0.8Tooth: 50Outer Diameter: 41.5mm (1.63")Inner...$3 -
TRA5379XTraxxas Front 37T Differential Ring and 13T Pinion Gear
This is the Traxxas Front 37T Differential Ring and 13T Pinion Gear 37-tooth ring and 13-tooth pinion gears for front differentials. Replacement Part ForFord Fiesta ST RallyFord F-150 Raptor R 4X4Ford Fiesta ST Rally BrushlessFord Fiesta ST RallyHoss 4X4...$15 -
GPM-SLA021-BGPM Blue Aluminum Front Steering Blocks for 4x4 Slash Rustler Stampede Rally
These are the GPM Blue Aluminum Front Steering Blocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and Telluride vehicles. These are made of 6061-T6 aluminum and anodized for a beautiful finish.These are an upgraded replacement for...$2390 -
TRA2943Traxxas Battery Charge Indicators Green (4) Blue (4) Grey (4)
This is a set of Traxxas LiPo Battery Charge Indicator Plug Set. The set includes four Green, four Blue, and four Grey indicator plugs. Use these plugs to know which batteries are fully charged, discharged, or in storage charge, and to protect the...$5 -
TRA1747GTraxxas 4mm Nuts Green Aluminum Flanged Serrated Locknuts
This is a set of four Traxxas Green-Anodized Aluminum 4mm Lock Nuts with a Flanged and Serrated surface.Features May be used in any application requiring this size locknut Serrated rear section ensures sure grip Includes: Four 4mm Flanged...$750 -
GPM-SLA055-RGPM Red Aluminum Lower Suspension Arm for Front/Rear 4x4 Slash Stampede, Rear of 2WD Stampede & Rustler
These are the GPM Racing Red Aluminum Lower Suspension Arms for the Front or Rear of the Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, XO-1, or the rear of the Stampede 2WD and Rustler 2WD vehicles. These are made of 6061-T6 aluminum for improved...$2390 -
TRA3945XTraxxas 15-Tooth 32P Machined Hardened Steel Pinion Gear w/Set Screw
This is the Traxxas 15-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear. The heavy-duty 15-tooth (32-pitch) pinion gear is machined from...$595 -
GPM-RUS4013-BGPM Aluminum Rear Gearbox for 4x4 Slash Rustler Stampede (Blue)
This is the GPM Racing Blue Aluminum Rear Gearbox for Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and XO-1 vehicles. Made of 6061-T6 aluminum, these are super rigid and prevent flex that can lead to damaged differential gears. The finned...$4990 -
RPM81030RPM Tail Light Set for RPM Slash & SC10 2WD Bumpers
This is the RPM Tail Light Set for RPM Traxxas Slash 2WD, Slash 4x4, and Associated SC10 2WD Bumpers. These are designed for use with the RPM bumpers listed below. They will not work on stock bumpers.Our bumper and roof light sets for the Traxxas Slash...$729 -
TRA2578Traxxas Buttonhead Screws 3x12mm (6)
These are Traxxas 3x12mm Button Head Screws (6). Features: Steel Construction Black in color Hex head Includes: Six button head screws Specifications:Length: 12mm (.47")Diameter: 3mm (.12") Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16...$250 -
GPM-SSLA1280FHA-BGPM Blue Stainless Steel & Aluminum Front CVD Driveshaft Set w/Hex for 4x4 Slash Rustler Stampede Rally
This is the GPM Racing Blue Stainless Steel and Aluminum Front CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints, with the main...$3690 -
TRA6747Traxxas Gear, 11-T pinion (32-p) (mach. steel)/ set screw
This is the Traxxas Gear, 11-T pinion (32-p) (mach. steel)/ set screw. 11-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can...$350 -
TRA3946XTraxxas 16-Tooth 32P Machined Hardened Steel Pinion Gear w/Set Screw
This is the Traxxas 16-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory Part For1/10 E-Revo BrushedE-MaxxSlash 4x4...$595