Traxxas Slash 4X4 RC Truck, Parts & Upgrades
Traxxas Slash 4x4 Is Built For Performance
The Traxxas Slash 4×4 is built for a streamlined performance through dirt, mud, snow or on concrete. Each is ready to race and also works well with upgrades. With the painted and decaled body, the Slash will look great while tearing up the road. Each is fully assembled and ready with pre-glued tires so that you can get started with the races once the vehicle arrives at your home.
Each Traxxas Slash uses TQi 2.4GHz for an excellent range and steady radio communication. The TQi transmitter included with the Slash 4×4 Ultimateconnects with Androids and Apple products including iPads and iPhones. Pull up a dashboard on your smart device to view speed, RPM, and motor temperature. Sealed on-board electronics ensure that no water will get into your servo or receiver.
Our Short Course Truck Recommendations
Each Slash 4×4 VXL truck comes with the Traxxas Stability Management which will help you navigate slippery courses in any weather condition. Your truck will rear back onto the track if it slips out of control and keep going. Have faith that you can finish the next race while keeping an eye on the rest of the pack. Experiment with various batteries to ensure that you maintain adequate power for your race track.
Traxxas Slash 4x4 VXL
Are you ready for the power of a brushless motor? Try out the Traxxas Slash 4×4 VXL Brushless RTR Short Course RC Truck w/TSM. This model is available in several race replica body styles, as well as the White Fox Racing Edition, which makes for a sleek design. You will tear up the road with these aesthetics.
The Traxxas Slash 4×4 VXL Brushless RTR Truck LIPO COMBO PACKAGE comes with a LiPo battery and charger. You get an extended runtime, which is great for when you have longer racecourses or extra time to bash at the skate park. Try our different battery packs if you want to increase your speed, or adjust your oil in your shocks to suit your driving style or racecourse.
How The Traxxas Slash 4×4 Sets The Standard
The Traxxas Slash VXL is built for the short course. When you need a car that handles twists and turns at a rapid speed, then this truck is the right one for you. You get top-notch support in the truck’s structure and ample power for the road. The chassis design is built for speed and to navigate obstacles more easily.
You can go more than sixty miles per hour with the Velineon brushless power motors. The best part is that the motor is low-maintenance. Harness your speed so that you can win that race. TSM-rated tires are built to handle the extra pressure so you won’t have to worry about replacing them too soon.
Find Your Traxxas Slash 4×4 Truck, Parts, and Upgrades At RC Superstore
RC Superstore wants to deliver the best models for your RC vehicle hobby. We love introducing beginners to the best cars and providing parts for those who want to upgrade or maintain their machines. We offer rewards points on purchases so that you can get the best deals on cars, boats, and parts.
Contact us today to find out what vehicle will suit your need for speed. RC Superstore’s customer service will go the extra mile to ensure that you are satisfied with your vehicle.
-
RPM70502RPM Dual Spare Tire Carrier for Slash 2WD & 4x4
This is the RPM Dual Spare Tire Carrier for Traxxas Slash 2WD and 4x4 trucks. The dual tire carrier requires running the RPM rear bumper for installation.Mounting Requirements:An RPM Slash 2wd or Slash 4x4 Rear Bumper is required for installation (will...$1099 -
RPM81012
RPM Mud Flaps (RPM Bumper Only) Traxxas Slash
These are the RPM Mud Flaps for use on the RPM Bumpers designed for the Traxxas Slash. FEATURES Rubber construction Black in color INCLUDESTwo Mud FlapsTwo Support ArmsTwo Screw SupportsFour 3x10mm Buttonhead ScrewsFour 3x16mm Buttonhead...$799 -
HRAESC303T06
Hot Racing Traxxas VXL-3s ESC Aluminum Heat Sink & High Velocity Fan
This is the Hot Racing Traxxas VXL-3s ESC Aluminum Heat Sink and High Velocity Fan. This is a great upgrade for all Traxxas VXL brushless vehicles, including the Slash 2WD VXL, Slash 4x4, Stampede 4x4 VXL, Stampede 2WD VXL, Rustler VXL, and Bandit VXL...$2349 -
RPM80022
RPM Black Front Bumper and Skid Plate for Traxxas Slash 4x4
This is the RPM Front Bumper and Skid Plate for use on the Traxxas Slash 4x4 Vehicles. When Traxxas first announced the 4x4 version of the Slash, RPM customers immediately started asking us if our 2wd version parts would fit it. Sadly, that was not the...$1099 -
RPM80122
RPM Rear Bumper for the Traxxas Slash 4x4 (Black)
This is the RPM Rear Bumper for use on the Traxxas Slash 4X4. This fits all versions of the 1/10 scale Traxxas Slash 4x4 including the Slash Ultimate and Slash Platinum.The 4x4 version of the Slash is another awesome creation from the minds at...$1089 -
RPM73952
RPM Single Spare Tire Carrier for Slash 2WD & 4x4
This is the RPM Single Spare Tire Carrier for Traxxas Slash 2WD and 4x4 trucks. This requires using an RPM rear bumper for the Slash 2WD or 4x4.Are you looking to bolt on a spare tire to your favorite short course truck but prefer the look of a single...$1099 -
HRATRX15EX06
Hot Racing Super Duty Slipper Clutch for Slash 4x4, Stampede 4x4, Summit, E-Maxx, E-Revo, Revo 3.3
This is the Hot Racing Super Duty Slipper Clutch for Traxxas Slash 4x4, Stampede 4x4, 1/10 Summit, E-Maxx, E-Maxx Brushless, 1/10 E-Revo, 1/10 E-Revo Brushless, 1/10 Rally VXL, Revo 3.3, Slayer Pro 4x4, and T-Maxx 3.3 trucks. This replaces the Traxxas...$2788 -
HRATRX15GPL06
Hot Racing Power Up Slipper Eliminator for Slash 2WD & 4x4, Stampede 2WD & 4x4, Rustler, Bandit
This is the Hot Racing Power Up Slipper Eliminator for Traxxas Slash 2WD & 4x4, Stampede 2WD & 4x4, Rustler, Bandit, 1/10 Rally VXL, and Jato 3.3. This will work on the XL-5 brushed and VXL brushless versions of the electric trucks.FEATURES:- Eliminates...$1588 -
RPM81312
RPM Low Visibility Wheelie Bar for RPM Bumper on Slash 2WD, 4x4, Ten-SCTE
This is the RPM Low Visibility Wheelie Bar for use with RPM Bumpers on the Traxxas Slash 2WD, Slash 4x4, and Losi Ten-SCTE short course 1/10 scale trucks. These must be used with the RPM bumpers for the Slash, or the RPM bumper mounts for the Ten-SCTE.A...$699 -
RPM80709
RPM Red Front/Rear A-Arms for Traxxas Slash 4x4, Rustler 4x4, Hoss 4x4 and Stampede 4x4
These are the RPM Red Front or Rear Suspension A-Arms for Traxxas Slash 4x4, Rustler 4x4, Hoss 4x4, Stampede 4x4, and 1/10 Rally VXL cars and trucks.RPM A-arms for the Traxxas Slash 4x4 , Rustler 4x4 Hoss 4x4 and Stampede 4x4 are everything you've come...$879 -
HRATRX15GSL
Hot Racing Carbon Fiber Long Slipper Clutch Pads - Use in place of Traxxas 5352 or 5552
These are the Hot Racing Carbon Fiber Long Slipper Clutch Pads with 25% more surface area than stock pads, for use in place of Traxxas 5352 or 5552 pads. These fit Traxxas Bandit, E-Maxx, E-Revo, Jato 3.3, Rally VXL, Revo 3.3, Rustler, Slash 2WD, Slash...$888 -
HRASLF311
Hot Racing Adjustable Front & Rear Sway Bar Kit for Slash 4x4 & 1/10 Rally
This is the Hot Racing Adjustable Front and Rear Sway Bar Kit for Traxxas Slash 4x4, Stampede 4x4, 1/10 Rally VXL, and Telluride trucks.FEATURES:- Adjustable spring steel sway bar wire- A set of three sway bars for a wider range of adjustment to suit the...$1888 -
HRATRX15GX06
Hot Racing Small Super Duty Slipper for Slash, Stampede, Rustler, Bandit, Jato
This is the Hot Racing Small Super Duty Slipper System with Pressure Plate, Hub, and Friction Pad for Slash 2WD, Slash 4x4*, Stampede 2WD, Rustler, Bandit, 1/10 Rally VXL*, Jato 3.3, and Stampede 4x4*. This will work on XL-5 brushed and VXL brushless...$2888 -
HRATD105X06
Hot Racing Aluminum 105mm HD Big Bore Rear Shocks for Slash, Stampede, Rustler
These are the Hot Racing Aluminum 105mm HD Big Bore Shocks. These can be used on the rear of Traxxas Slash 2WD & 4x4, Stampede 2WD & 4x4, Rustler, and many other vehicles using 105mm shocks. These can be great for scale and rock crawler builds as well...$2788 -
RPM81030
RPM Tail Light Set for RPM Slash & SC10 2WD Bumpers
This is the RPM Tail Light Set for RPM Traxxas Slash 2WD, Slash 4x4, and Associated SC10 2WD Bumpers. These are designed for use with the RPM bumpers listed below. They will not work on stock bumpers.Our bumper and roof light sets for the Traxxas Slash...$729 -
RPM73562
RPM Black Front LCG Bulkhead for Slash 4x4 & 1/10 Rally & Rustler 4x4
This is the RPM Black Front Low-CG Bulkhead for Traxxas Slash 4x4 Ultimate, 1/10 Rally, and Slash 4x4 trucks with the low-CG conversion. Adding these to your truck will increase durability and simplify maintenance due to the two-piece design.Designed...$949 -
HRATRX15GS
Hot Racing Carbon Fiber Slipper Clutch Pads - Use in place of Traxxas 5352 or 5552
These are the Hot Racing Carbon Fiber Stock Length Slipper Clutch Pads, for use in place of Traxxas 5352 or 5552 slipper pads. These fit Traxxas Bandit, E-Maxx, E-Revo, Jato 3.3, Rally VXL, Revo 3.3, Rustler, Slash 2WD, Slash 4X4, Slayer Pro 4X4,...$748 -
RPM73272
RPM ESC Cage for Sidewinder 3 for Slash 2WD, 4x4, Stampede, Rally, Rustler, Bandit
This is the RPM Black ESC Cage for Castle Sidewinder 3 and Sidewinder SCT ESCs. The RPM ESC Cage fits in the stock location on the Traxxas Slash 2WD, Slash 2WD LCG, Slash 4x4, Slash 4x4 LCG, Stampede 4x4, Rustler VXL, Bandit VXL, and 1/10 Rally, while...$749 -
HRASLF311E
Hot Racing Front & Rear Sway Bar Set for Slash 4x4 & 1/10 Rally
This is the Hot Racing Front and Rear Sway Bar Set for Traxxas Slash 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles.FEATURES:Adjustable spring steel sway bar wire.YOU WILL RECEIVE:One Set of Front and rear Sway Bars WireTwo med chrome anti-roll bars.Four...$1388 -
RPM80402
RPM Black Shock Shaft Guards for Traxxas Slash 2WD, 4x4, Rally, Stampede, Rustler, Bandit
These are the RPM Black Shock Shaft Guards for the Traxxas 1/10 Slash 2WD, Slash 4x4, Stampede, Rustler, Bandit, and 1/10 Rally vehicles. These do not fit vehicles using GTR shocks, so they will not work on Slash 4x4 Ultimate trucks.Rocks, dirt and...$849 -
HRATRX15EPL06
Hot Racing Power Up Slipper Eliminator for Slash 4x4, Stampede 4x4, Revo, E-Revo, Summit, E-Maxx, T-Maxx
This is the Hot Racing Power Up Slipper Eliminator for Traxxas E-Maxx, E-Revo, Rally VXL, Revo 3.3, Slash 4X4, Slayer Pro 4X4, Stampede 4X4, 1/10 Summit, and T-Maxx 3.3.FEATURES:- Eliminates the transmission slipper assembly to transmit all power to...$1649 -
HRAWH17HT01
Hot Racing 12mm to 17mm Hex Hub Adapters w/10mm Offset for Slash 4x4, Stampede 4x4, Telluride
This is the Hot Racing 12mm to 17mm Hex Hub Adapters with 10mm Offset for Traxxas Slash 4x4, Stampede 4x4, Telluride, Associated ProLite 4x4, and Losi TEN-T vehicles.These adapters are compatible with many 1/10th scale vehicles with factory 12mm hex hubs...$2888 -
RPM80332
RPM Black Snap-Tite RC Car & Truck Body Savers
This is a set of RPM Black Snap-Tite Body Savers. One of the weakest points on a Lexan body is where the body mounts to the chassis. The holes cut in the body for the body posts have a tendency to crack and fracture. This is the reason RPM designed these...$229 -
RPM80025
RPM Blue Front Bumper & Skid Plate for Traxxas Slash 4x4
This is the RPM Blue Front Bumper and Skid Plate Set for the Traxxas Slash 4x4 Short Course Trucks.When Traxxas first announced the 4x4 version of the Slash, RPM customers immediately started asking us if our 2wd version parts would fit it. Sadly, that...$1149 -
RPM73765
RPM Blue ESC Cage for Castle Mamba X on Traxxas
This is the RPM Blue ESC Cage to use the Castle Mamba X ESC on Traxxas Slash 2WD, Slash 4x4, Stampede 4x4, and 1/10 Rally VXL. This can also be used on the Rustler, Stampede 2WD, and Bandit when the Traxxas 3725 mounting plate is on the vehicle (stock...$749 -
HRATD100X06
Hot Racing Aluminum 100mm HD Big Bore Rear Shocks for Slash, Stampede, Rustler
These are the Hot Racing Blue Aluminum 100mm HD Big Bore Rear Shocks for Slash 2WD, Slash 4x4, Stampede 2WD & 4x4, Rustler, Bandit, T-Maxx and E-Maxx front/rear, Associated SC10, and many other vehicles that can use 100mm shocks. These are also a great...$2849 -
RPM82337
RPM Pink Revolver Short Course Wheels for Traxxas Slash (2wd Rear/4x4 Front/Rear)
These are the RPM Pink Revolver 2.2/3.0 Wheels for the front/rear of Traxxas 1/10 Slash 4x4, and rear of Slash 2WD Short Course trucks. These feature splined drives instead of hexes for incredible strength. Spline adapters are included.These could also...$749 -
RPM80514
RPM Green Long Rod Ends (12) for 1/10 Traxxas (Replaces TRA5525)
These are the RPM Green Long Rod Ends (12) for 1/10 Traxxas vehicles. These are direct replacements for TRA5525 rod ends.RPM Rod Ends cover a wide range of currently available Traxxas vehicles including all versions of the following: Slash 2wd, Slash...$749 -
HRAWH17HS01
Hot Racing 12mm to 17mm Hex Hub Adapters w/6mm Offset for Slash 4x4, Stampede 4x4, Telluride
This is the Hot Racing 12mm to 17mm Hex Hub Adapters with 6mm Offset for Traxxas Slash 4x4, Stampede 4x4, Telluride, Associated ProLite 4x4, and Losi TEN-T vehicles.These adapters are compatible with many 1/10th scale vehicles with factory 12mm hex hubs...$2888 -
HRASLF2101
Hot Racing Black Aluminum Steering Blocks for Slash 4x4, Stampede 4x4, Rally
These are the Hot Racing Black Aluminum Steering Blocks for Slash 4x4, Stampede 4x4, 1/10 Rally VXL, and Telluride trucks.FEATURES:- CNC machined aluminum- Anodized black- Machined chamfered edges- Laser etched lettering- Replaces factory stock plastic...$2988 -
HRALCF16C06
Hot Racing Dirt Guard Chassis cover for LCG Slash 4x4 or Rally 4x4
This is the Hot Racing dirt guard chassis cover for the 1/10 scale TRA Rally VXL and Slash 4X4 with the Low Center of Gravity (Low-CG, LCG) chassis. The chassis cover attaches to the chassis with easy-to-apply hook and loop tape; has zipper chassis...$2588 -
HRASLF16C06
Hot Racing Dirt Guard Chassis Cover (non-LCG chassis) for Slash 4WD
This is the Hot Racing dirt guard chassis cover for the 1/10 scale TRA Slash 4X4 with the regular (non-LCG) chassis. The chassis cover attaches to the chassis with easy-to-apply hook and loop tape; has zipper chassis access; and uses a breathable Nylon...$3588 -
RPM81692
RPM Shock Shaft Guards for Traxxas GTR Shocks
This is the RPM Shock Shaft Guards for Traxxas GTR Shocks RPM Shock Shaft Guards for Traxxas GTR shocks are the ultimate upgrade to protect your expensiveGTR shocks. Rocks, dirt and debris striking shock shafts lead to dents, dings and burrs. Damaged...$1099 -
HRASLF2201
Hot Racing Black Aluminum 0-Deg Rear Hub Carriers for Slash 4x4, Stampede 4x4, Rally
These are the Hot Racing Black Aluminum 0-Degree Rear Hub Carriers for Slash 4x4, Stampede 4x4, 1/10 Rally, Telluride, Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede.FEATURES:- CNC machined aluminum construction- Anodized Black in color-...$1888 -
RPM73275
RPM Castle Sidewinder 3 & SCT Blue ESC Cage for Traxxas
This is the RPM Castle Sidewinder 3 and Sidewinder SCT Blue ESC Cage for use with Traxxas vehicles like the Slash 2WD, Slash 4x4, Stampede 4x4, 1/10 Rally VXL and others (see Tech Notes for vehicle fit info).The RPM cage allows the ESC to be run with or...$749 -
HRASLF117X06
Hot Racing Aluminum Splined 17mm Hex 6mm Offset Hubs for Slash & Stampede 4x4
These are the Hot Racing Aluminum Splined 17mm Hex 6mm Offset Hubs for the Traxxas Rally VXL, Slash 4X4, Stampede 4x4, and Telluride 4X4 vehicles. Offset from stock wheel hex is +6mm per side.FEATURES:- Black anodized CNC machined aluminum hex adapter-...$2888 -
RPM73565
RPM Blue Front LCG Bulkhead for Slash 4x4 Ultimate, 1/10 Rally, Slash 4x4 LCG, Rustler 4x4 LCG
This is the RPM Blue Front Low-CG Bulkhead for Traxxas Slash 4x4 Ultimate, 1/10 Rally, and Slash 4x4 trucks with the low-CG conversion. Adding these to your truck will increase durability and simplify maintenance due to the two-piece design.Designed from...$949 -
RPM80125
RPM Blue Rear Bumper for Traxxas Slash 4x4
This is the RPM Blue Rear Bumper for the Traxxas 1/10 Slash 4x4 short course trucks.The 4x4 version of the Slash is another awesome creation from the minds at Traxxas but with a little help from RPM, weve made it even better! Our new rear bumper is...$1079 -
RPM70942
RPM ESC Cage for Traxxas VXL-3s ESC 3355R (Black)
This is the RPM Black ESC Cage for the Traxxas 3355R VXL-3s ESC. RPM had numerous requests for an ESC Cage for the #3355R version of the Traxxas VXL-3S ESC since the mounting tabs have been reported to us as weak. Why risk potential damage to your $220...$779 -
RPM73762
RPM Black ESC Cage for Castle Mamba X on Traxxas
This is the RPM Black ESC Cage to use the Castle Mamba X ESC on Traxxas Slash 2WD, Slash 4x4, Stampede 4x4, and 1/10 Rally VXL. This can also be used on the Rustler, Stampede 2WD, and Bandit when the Traxxas 3725 mounting plate is on the vehicle (stock...$749
