Nitro Rustler

This is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks. Includes:One 70 tooth gear Features:Tough nylon constructionDrilled for light weight

This is the Long Temperature and Voltage Sensor for the Traxxas TQi system. To read voltage on electric vehicles, this must be used with the Traxxas part TRA6541X Power Tap. The temperature/voltage...

This is a package of replacement Traxxas 5x8mm Teflon Washers  Set of 20 PTFE-coated 5x8x0.5 mm washers for use with bearings.

These are rubber cap diaphragms for Traxxas plastic shocks. These also work well with some Associated aluminum shocks. Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit...

This is the Replacement 72 Spur Gear for the Traxxas Nitro Rustler and Nitro T-Maxx Trucks. FEATURES:Black plastic, slipper clutch style spur gear.

This is the GPM Racing Green Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These...

This is the Traxxas TQi Transmitter Traxxas Link Enabled 2.4GHz High Output 3-Channel (Transmitter Only) TransmitterTQi Traxxas Link enabled, 2.4GHz high output, 3-channel

This is the Traxxas Transmitter TQi Traxxas Link Enabled 2.4GHz High Output 4-Channel (Transmitter Only) The 4-channel TQi transmitter combines a full complement of tuning features with the...

This is the Traxxas TQ 2.4GHz 3-Channel Transmitter.   (Transmitter Only) Switch on the power and drive! That's all there is to it with the TQ 2.4GHz radio. There are no frequencies to manage, so the...

This is a set of Traxxas Stub Axle Pins.  These pins slide through the axle and keep the wheel hexes from spinning on the axle. Set of four replacement stub axle pins

This is the RPM Black Front Bulkhead for Traxxas 2WD trucks, including the Slash 2WD, Nitro Slash, Rustler, Nitro Rustler, Stampede 2WD, Skully, Craniac, Bigfoot, Nitro Stampede, and Bandit trucks...

This is the Traxxas Antenna Cap Set with Antenna Spool. The antenna spool is used for wrapping excess antenna wire before inserting it in the antenna tube to prevent wire from hanging out the end of...

This is the Traxxas Heat Shield Tubing for Fuel Line (2) Fiberblass heat shield tubing Replacement Part ForJatoNitro RustlerNitro SlashR

This is a Traxxas Front Bumper. This bumper fits many different vehicles, including the Stampede 2WD, Rustler, Bandit, and many nitro vehicles.Fits1/10 Monster Jam TrucksBandit VXLBandit...

This is the Traxxas Rear Steel-Spline Constant-Velocity Driveshafts (Complete Assembly) (2) Traxxas steel constant velocity driveshafts offer the ultimate in torque handling and efficient power...

This is pack of Traxxas DC Charger 5-Amp Fuses (2). These are replacements for use in the 2-amp and 4-amp DC 12-volt cigarette-lighter style quick chargers included with many of the Traxxas electric...

This is the Traxxas Premium Shock Oil Set with Spinning Carousel Rack FeaturesSeven precise viscosities ranging from 20wt to 80wt100% silicone oil for maximum consistencyPrecision-pour, twist-nozzle...

This is the Traxxas aluminum blue-anodized shock caps Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined caps fit...

This is the Traxxas 2075X Digital High-Torque Metal Gear Waterproof Ball Bearing Servo. This is the stock steering servo on the TRX-4 Trail Crawler. It can be used as an upgrade for any 1/10 Traxxas...

This is the Traxxas 4-Cell AA Battery Holder with On/Off Switch for use to power the receiver and servos in nitro vehicles.FitsNitro 4-TecNitro RustlerNitro SlashNitro SportNitro...

This is the Traxxas 1200mAh NiMH 5-Cell 6-Volt Hump Pack Receiver Battery for Traxxas Nitro vehicles.  This high quality 5-cell hump pack uses proven nickel-metal hydride cells and is rated at...

This is the RPM Blue Front Bulkhead for Traxxas 2WD trucks, including the Slash 2WD, Nitro Slash, Rustler, Nitro Rustler, Stampede 2WD, Skully, Craniac, Bigfoot, Nitro Stampede, and Bandit trucks and...

This is a set of Traxxas Long Rod Ends with Hollow Ball Connectors. Each package contains six rod ends and six hollow balls.Fits1/10 Monster Jam Trucks1/10 RallyBandit XL-5CraniacE-MaxxNitro...

This is a package of Traxxas Slipper Friction Pegs.  There are 12 pegs included.  These are for the vehicles using a spur gear and slipper clutch setup requiring these pegs.  These include the T-Maxx...

This is a Traxxas EZ-Start 2 Replacement Motor and Pinion Gear.  This is used on vehicles like the T-Maxx 2.5, 3.3, Revo 2.5, 3.3, Jato, Nitro 4-Tec, Nitro Rustler, Nitro Slash, Slayer Pro, and other...

This is the Traxxas Black HD Rear Suspension Arms for Slash 2WD, Nitro Rustler Slash Rear heavy-duty suspension arms incorporate our toughest proprietary composite material. Traxxas designed this...

This is the Traxxas Orange HD Rear Suspension Arms for Slash 2WD, Nitro Rustler Slash Rear heavy-duty suspension arms incorporate our toughest proprietary composite material. Traxxas designed this...

This is the Traxxas Red HD Rear Suspension Arms for Slash 2WD, Nitro Rustler Slash Rear heavy-duty suspension arms incorporate our toughest proprietary composite material. Traxxas designed this...

This is the Traxxas Green HD Rear Suspension Arms for Slash 2WD, Nitro Rustler Slash Stampede Rear heavy-duty suspension arms incorporate our toughest proprietary composite material. Traxxas designed...

This is the Traxxas Blue HD Rear Suspension Arms for Slash 2WD, Nitro Rustler Slash Rear heavy-duty suspension arms incorporate our toughest proprietary composite material. Traxxas designed this...

This is the Traxxas Orange Aluminum Rear Stub Axle Carriers (2) Traxxas aluminum stub axle carriers add the strength of 6061-T6 alloy with a beautifully-anodized finish without compromising their...

This is the Traxxas Glow Plug Lead Wire for the Revo EZ Starting System. This attaches to the glow plug prong to heat the plug during starting. Features: Blue silicone insulated wire with...

This is the Traxxas 600 Brushless Digital High-torque Metal Gear Ball Bearing Waterproof Servo High-Torque 600 Brushless Digital ServoThe Traxxas High-Torque 600 brushless servo is the ultimate...

This is a Package of 3x12x5mm Shoulder Screws for many Traxxas Vehicles. Set of six 3x12 mm shoulder screws (shock attachment screws) with Phillips-drive heads.

This is the GPM Racing Black Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These...

This is the Traxxas Hex Wrench Set with 1.5mm, 2mm, 2.5mm, 3mm, and 2.5mm ball wrenches. Whether you have a Slash, Revo, E-Maxx, Summit, or something else, these are a must-have set of wrenches for...

This is the Traxxas Stub axle, rear, steel-splined constant-velocity (1)Replacement rear stub axle for Traxxas steel CV driveshafts (1951R, 6852R)Accessory Part For:BIGFOOTHoss 4X4 VXLNitro...

This is a pair of RPM Chrome Revolver 2.2" Wheels for front of the Traxxas Electric Rustler and Electric Stampede 2WD, or the rear of Traxxas nitro vehicles like the Jato, Nitro Rustler, Nitro Sport,...

This is a pair of Traxxas Throttle Dust Boots and a Return Spring for use on the carburetors of the TRX 2.5, 2.5R, and 3.3 nitro engines.Fits:Jato 2.5 & 3.3Nitro 4-TecNitro Rustler 2.5Nitro SlashRevo...

This is a set of four Traxxas Green-Anodized Aluminum 4mm Lock Nuts with a Flanged and Serrated surface.Features May be used in any application requiring this size locknut Serrated rear section...