1/16 Summit

This is the Traxxas Rocker arm set, long travel/ plastic bushings (8). This is Traxxas part number 7156Part Number: 7156 / TRA7156Fits1/16 SummitMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you...

This is the Traxxas Ball bearings, blue rubber sealed (8x12x3.5mm) (2). Pair of 8x12x3.5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction. Replacement Part For1/16...

This is the Traxxas Rocker arm set, progressive-2/ plastic bushings (8).Rocker arm set, progressive-2/ 4x7x2.5mm PB (8)Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16...

This is the Traxxas Short Temperature and Voltage SensorThe temperature/voltage sensor plugs directly into your TQi receiver and power tap to provide real-time motor temperature and battery voltage data while you drive. Real-time telemetry requires a...

These are the RPM Green Front Upper & Lower Suspension A-Arms for Traxxas 1/16 E-Revo and 1/16 Grave Digger trucks.Upon the release of the Traxxas 1/16th Scale Mini E-Revo, RPM immediately started receiving requests for durability upgrades. What...

This is the Traxxas Complete Differential Assembly for the 1/16 scale E-Revo, Summit, Slash, Rally, and other Traxxas 1/16 vehicles.Includes: One complete differential assembly

This is the 19-Tooth Pinion Gear (48-Pitch) 3 mm Bore 19-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance...

This is a set of two (2) Traxxas 4mm x 7mm x 2.5mm Blue Rubber Shielded Ball Bearings.  These are factory replacements.  These fit several Traxxas models. Upgrade your standard plastic bellcrank bushings with these 4x7x2.5 mm blue-seal...

This is the Traxxas Premium Large Rubber Overmold Speed Bit Handle with 1/4" Drive for use with Traxxas Speed Bit Metric Hex/Allen and Nut Driver tips. The large speed bit handle holds bits securely with an overmolded rubber grip to provide excellent...

This is the Traxxas Aluminum Handled Body Post Hole Reamer with Cap for Lexan RC bodies.  With a crisp steel cutting edge and included aluminum cap for protection, this is not your average body reamer.  The tip features both metric (mm) and...

This is the Traxxas Black Antenna Tube with Cap and Wire Retainer.  These are compatible with nearly all Traxxas cars, trucks and boats.  The sleek black design looks great as well.

This is the Hot Racing Black Aluminum Front Bulkhead for Traxxas 1/16 E-Revo, Summit, Slash, and Rally. This will fit the brushed and VXL brushless versions of these vehicles. This is a direct replacement for Traxxas part 7030X.FEATURES:- Robust CNC...

This is the Traxxas Gear set, differential (output gears (2)/ spider gears (3))/ differential output shafts (2)/ 1.5x6mm pin (3)/ 1.5x8mm pin (2). This is Traxxas part number 7082Part Number: 7082 / TRA7082Fits1/16 E-Revo Brushed1/16 E-Revo VXL...

This is the Traxxas Velineon 380 Brushless Motor Rebuild Kit for the 1/16 brushless system. It includes two 4x9x4mm ball bearings, two 2x6mm screws with threadlock, and two front shims.Includes:Two 4x9x4mm Ball BearingsTwo 2x6mm Countersunk ScrewsTwo...

This is full set of four Traxxas 1/16 GTR Hard-Anodized Aluminum Adjustable Shocks with TiN Shafts and PTFE-coated Bodies.  Shock oil is included.  These are the ultimate shock upgrade for 1/16 E-Revo, 1/16 Summit, and 1/16 Slash 4x4 trucks...

This is set of Traxxas 5525R Heavy Duty Rod Ends (8). These are used in many Traxxas vehicles, including the Stampede 2WD, Rustler, Bandit, Slayer, Jato and 1/16 Summit.Includes:8 rod endsSpecificationsLength: 31.5mm (1.24")Width at ball joint: 11mm (0...

This is the optional Clear Body for the Traxxas Summit VXLFeaturesTrimmed and ready to paintIncludesOne Clear Body for the Traxxas 1/16 Summit VXLRequiresPolycarbonate safe spray or brush-on paintGrille and decalsSpecificationsLength: 11.4" (291mm)Width:...

These are Traxxas 3x10mm Hex Screws (6). Features: Steel construction cap head with hexagon socket drive insert Metal lock washers Includes:(6) Screws(6) Lock Washers(1) Hex Wrench Specifications:Screws:Diameter: 3mmLength: 10mm Lock Washers:Inner...

This is the Hot Racing Red Aluminum Steering Arm Post for Traxxas 1/16 E-Revo, Slash, Summit, and Rally vehicles. This will fit brushed and VXL brushless versions of these 1/16 cars and trucks. This is a direct replacement for Traxxas part 7043...

This is the Traxxas Telemetry Trigger Magnet for the Traxxas TQi Telemetry System. Replacement 5x2 mm telemetry trigger magnet.IncludesOne Telemetry Trigger Magnet for the Traxxas TQi Telemetry SystemSpecifications5mm x 2mm round magnet Replacement Part...

These are the Differential and Transmission Yokes for use on the Traxxas 1/16 E-Revo, Slash, and Summit vehicles.FEATURESNylon constructionBlack in colorINCLUDESTwo YokesTwo 3x10mm Screw PinsREQUIRESInstallation on the vehicle

This is the Traxxas Foam Body Washers - 2mm/3mm/4mm Adhesive-backed foam body washers help protect your custom paint work by providing a cushion between the body and body post for more secure mounting and less rattling. Includes (4) 2 mm(4) 3 mm(4) 4...

This is the Traxxas Body mounts, front & rear. This is Traxxas part number 7215Part Number: 7215 / TRA7215Fits1/16 SummitMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have any questions.

This is the Traxxas Spur gear, 55-tooth. This is Traxxas part number 7047R55-tooth spur gear (48-pitch) with telemetry magnet holder. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance...

This is the Traxxas Bellcrank Bushings (Plastic) set (5x8x2.5mm) (4) Includes: Set of four 5x8x2.5 mm bellcrank bushings

These are the Traxxas Left and Right Axle Carriers for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. Features: Nylon construction Black in color Includes:One Left Axle CarrierOne Right Axle Carrier

This is the Traxxas Gearbox Halves Front & Rear Front and Rear gearbox halves Replacement Part For1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit

This is the Traxxas Push rods, aluminum (red-anodized) (4) (assembled with rod ends). This is Traxxas part number 7118XPart Number: 7118X / TRA7118XFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Grave Digger1/16 SummitMore detail coming soon!...

These are Traxxas 4x8x3mm Sealed Ball Bearings (2). These are used in 1/16 vehicles such as the E-Revo and Slash, as well as many other Traxxas vehicles. Features:Blue rubber sealedMay also be used in any vehicle where this size bearing is...

These are Traxxas 2.5x8mm Cap Head Screws (6). Features: Steel construction Black in color Cap head design Includes: (6) 2.5x8mm cap head screws Specifications:Length: 5/16" (8mm)Diameter: 3/32" (2.5mm)

This is the Traxxas 1/16th Summit Decals Sheets of pre-cut adhesive 1/16 scale Summit decals

This is the Traxxas LiPo cell voltage checker/balancer. This voltage checker and balancer requires the #2938X adapter if you are using it with Traxxas iD batteries.Use the LiPo battery checker to view individual LiPo cell voltages and overall...

This is the Traxxas Blue Aluminum 1/16 Motor Plate When upgrading your 1/16 scale vehicle to Velineon brushless power, you will need to change the standard motor plate and mount. Use the 7090 motor plate and 7060 motor mount with the Velineon 380...

This is the Traxxas Metal Gear Set For 2065R Waterproof sub-micro servo Replacement metal gear set for 2065R servo. Gears may also be used to upgrade the 2065A and 2065T servos. Gears do not fit 2065 or 2065X servos. Replacement Part ForTRX-4MT 1/18 1979...

This is the Traxxas Servo Case/Gaskets (for 2065A waterproof sub-micro servo) Replacement case for 2065A servo. Includes gaskets. Case does not fit 2065 or 2065X servos. Replacement Part For 1/18 LaTrax Desert Prerunner1/18 LaTrax Rally1/18 LaTrax...

This is the Traxxas Gear Set for Micro Waterproof ServoReplacement gear set for 2080A servo. Does not fit 2080 or 2080X servos.Replacement Part For These Models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit

This is the Traxxas Waterproof Micro ServoThe 2080A waterproof micro servo gives you the freedom to drive in rain, mud, and snow.Replacement Part For These Models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit

This is the Traxxas LED Lights, Power Supply (Regulated, 3V, 0.5-Amp) w/ Power Tap ConnectorThis rugged and waterproof power supply provides a tightly-regulated 3-volt output current for your Traxxas 1/16 scale LED light kit. Includes(2) 2.6x8...

This is the Traxxas Power Tap Connector, Voltage Sensor Plug w/ Hardware The power tap connector plugs inline between the battery and ESC to provide power to the optional LED power supply and telemetry voltage sensor.   Includes (2) 2.6x8 mm...

This is the Traxxas LED light kit- 1/16th Summit Light up the trail with this powerful LED light kit for the 1/16 scale Summit. With four LEDs on the front bumper and another four on top of the roll cage, Summit illuminates the path ahead. Dual red...