1/16 Summit

This is the Traxxas Steering Arm and Shock Mount Set for use on the 1/16 vehicles including the E-Revo, Slash, Summit, Mustang, Fiesta, and Rally vehicles.FEATURESNylon construction Black in...

This is the Hot Racing Aluminum Heat Sink Motor Mount for Traxxas 1/16 vehicles with 540 or 550 Motors, such as the 1/16 E-Revo, 1/16 Slash, 1/16 Rally, and 1/16 Summit.FEATURES:- CNC machined aluminum construction- Anodized black with red anodized...

This is the Traxxas Differential locker, (2). This is Traxxas part number 7381Part Number: 7381 / TRA7381Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Kyle Busch Truck1/16 Rally VXL1/16 Slash 4x41/16...

This is the Traxxas Spring, shock (nickel finish) (GTR) (2.925 rate, blue) (1 pair). This is Traxxas part number 7245APart Number: 7245A / TRA7245AFits1/16 Grave Digger1/16 SummitMore detail coming soon! Please check your vehicle manual to confirm...

This is the Traxxas Complete Transmission for 1/10 2WD Rustler, Bandit, Stampede, and Slash trucks.  This comes pre-assembled with internal gears, slipper clutch, and spur gears, making for an ultra-simply swap to get you back out racing or bashing...

These are the Traxxas 2.5x10mm Cap-Head Hex Machine Screws. Each package includes six screws.Set of six 2.5x10 mm cap-head machine screws with hex-drive heads Replacement Part For:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit4-Tec 2.0 AWD...

This is a pair of Traxxas 1/16 Summit Canyon AT Tires mounted on Geode Wheels with Red Simulated Beadlocks. The tires come pre-mounted, so you can install and use them right away!INCLUDES:Two mounted Left & Right Canyon AT tires with foamsTwo Geode...

This is the Traxxas Skid Plate Set for use on the 1/16 E-Revo and Slash VXL Vehicles. Features: Nylon construction Black in color Includes:One Front SkidplateOne Rear SkidplateOne Transmission Skid PlateTwo Steering Servo GuardsOne Steering Servo Cover...

This is the 16-T Pinion (48-pitch) Gear with Set Screw 16-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance...

This is the Hot Racing Hardened Steel 48-Tooth Spur Gear for Traxxas 1/16 vehicles like the 1/16 E-Revo, Slash, Summit, and Rally.FEATURES:- CNC machined light weight hardened steel construction- Replaces stock nylon pinion gear- Direct replacement for...

These are the Front and Rear Body Mounts and Posts for use on the Traxxas 1/16 E-Revo and Slash Vehicles.FeaturesNylon constructionBlack in colorIncludesOne Front Body MountOne Rear Body MountTwo Front Body PostsTwo Rear Body Posts

These are the Traxxas Telemetry Trigger Magnet Holders for the TQi radio system. The telemetry trigger magnet holders secures the trigger magnet to the spur gear to provide real-time RPM and speed data when combined with an RPM sensor, TQi radio with...

This is the Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers. This works with 2S, 3S, and 4S ID LiPo batteries to connect them to cell voltage checkers for individual cell reading. Warning: These are not intended for charging. The...

This is the Traxxas Cover plates, differential (front or rear)/ gaskets (2)/ o-rings (2)/ 2x14mm BCS (4). This is Traxxas part number 7080Part Number: 7080 / TRA7080Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss...

These are the Traxxas 3x15mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many different Traxxas vehicles.Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL...

This is the Front Bulkhead for use on the Traxxas 1/16 scale E-Revo and Slash Vehicles. FEATURESNylon constructionBlack in color INCLUDES Two front bulkhead halves Four 3x10mm Button Head Screws One 2.5x23mm Cap Screw  REQUIRESInstallation over...

This is a set of Traxxas Center Front and Rear Half Shafts for the 1/16 Slash and E-Revo vehicles. FEATURES: Nylon construction Black in color INCLUDES:One Front Center Half ShaftOne Rear Center Half ShaftFour U-Joints

This is the Traxxas Metal Gear Waterproof Micro Servo The 2080R waterproof metal gear servo combines commanding steering authority for 1/16 scale vehicles with the superior durability of all-metal gears for the ultimate driving experience. Accessory Part...

This is the Traxxas LiPo cell voltage checker and balancer with the #2938X adapter for use with Traxxas iD batteries. This can be used to check cell voltages on 2S, 3S, and 4S Traxxas ID LiPo batteries, and also to equalize the battery pack cells if...

This is the Hot Racing Aluminum Servo Saver Steering Bellcrank for the Traxxas 1/16 Revo, 1/16 4x4 Slash, 1/16 Mustang, 1/16 Rally, and 1/16 Summit. This will fit the brushed and VXL brushless versions.FEATURES:- CNC machined aluminum construction-...

This is the Hot Racing Spring Loaded Skid Plate 2-Tire Wheelie Bar for the Traxxas 1/16 E-Revo, Slash, Summit, and Rally. This will fit the 1/16 brushed and VXL brushless versions of these vehicles.FEATURES:- Aluminum construction with 2 spring loaded...

This is the Traxxas Tires and wheels, assembled, glued (Geode chrome, blue beadlock style wheels, Canyon AT tires, foam inserts) (1 left, 1 right). Dirt, mud, snow…no matter where you run your 1/16 Summit, you can count on it to dig in hard with...

This is the Traxxas Spring, shock (nickel finish) (GTR) (2.77 rate, pink) (1 pair). This is Traxxas part number 7244APart Number: 7244A / TRA7244AFits1/16 Grave Digger1/16 SummitMore detail coming soon! Please check your vehicle manual to confirm...

This is the Traxxas XL-2.5 Waterproof Electronic Speed Control (ESC) with Low-Voltage Detection (LVD), pre-wired with the Traxxas high-current connector. Designed and engineered by Traxxas, the XL-2.5 Electronic Speed Control delivers smooth throttle...

These are Traxxas 3x8mm Button Head Screws (6). Features: Black steel construction with hex headIncludes: Six screws Replacement part for these models1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBlastDrag Slash 1967 Chevrolet...

These are the Hot Racing Heavy Duty Aluminum Front or Rear Axle Carriers (AKA steering knuckles) for Traxxas 1/16 E-Revo, Slash 4x4, Summit, Grave Digger, Ford Fiesta, and Rally.NOTE: The disc brakes shown in photos are Hot Racing VXS21BR02 and VXS21BS02...

These are the Traxxas 3x10mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many of the Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL...

This is the 18-T Pinion (48-pitch) Gear with Set Screw 18-Tooth Pinion Gear (48-Pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance...

This is the Hot Racing Aluminum Hard Anodized Red GTR Shock Bodies for Traxxas 1/16th scale vehicles, including the 1/16 E-Revo, 1/16 Slash 4X4, 1/16 Summit, 1/16 Rally, 1/16 Ford Fiesta, 1/16 Grave Digger, and 1/16 Mustang. These replace Traxxas part...

This is the Traxxas Spring, shock (GTR) (2.925 rate, blue) (1 pair). This is Traxxas part number 7245Part Number: 7245 / TRA7245Fits1/16 SummitMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you...

This is the Traxxas Caps and spring retainers, GTR shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2)). This is Traxxas part number 7065Part Number: 7065 / TRA7065Fits1/16 E-Revo Brushed1/16 E-Revo VXL...

This is the Traxxas Hollow balls, steel (machined). This is Traxxas part number 7028XPart Number: 7028X / TRA7028XFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16 Rally...

This is the Rear Bulkhead for use on the Traxxas 1/16 E-Revo and Slash Vehicles. FEATURESNylon construction, black in color INCLUDES Two Rear Bulkhead Sections Four 3 x 10mm Button Head Screws One 2.5 x 22mm  Socket Head Cap...

This is the Hot Racing Black Aluminum Rear Shock Mount for Traxxas 1/16 E-Revo, Slash, Rally, and Summit vehicles. This will work on 1/16 brushed and VXL brushless trucks.FEATURES:CNC machined of 6061-T6 aluminumBlack anodized finishYOU WILL RECEIVE:One...

This is the Traxxas Rocker arm post, steel (4). This is Traxxas part number 7155Part Number: 7155 / TRA7155Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16 Rally VXL1/16...

This is the 45T Spur Gear for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.FeaturesNylon constructionBlack in colorSpecificationsOuter Diameter: 24.75mm (0.97")Inner Diameter: 5.5mm (0.22")Width: 7mm (0.28")

These are the BellCrank Bushings for the Traxxas Nitro Jato Stadium Truck. FEATURES:Nylon constructionWhite in color INCLUDES:Four 4mm x 7mm x 2.5mm White Plastic Bushings REQUIRES:Assembly onto Vehicle

This is the Traxxas Curved Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a curved tip and straight tip (Traxxas part TRA3431) scissors in your...

This is the Traxxas Straight Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a straight tip and curved tip (Traxxas part TRA3432) scissors in your...

This is the Hot Racing Aluminum Rear Multi-Mount Rocker Arms for Traxxas 1/16 E-Revo, Slash, Rally, and Summit vehicles. Now you do not need to change the rocker arm to change progressive rate. Just change the mounting position.FEATURES:- CNC machined...