1/16 Rally

This is the Traxxas Front Suspension Arm Set for use on the 1/16 Slash VXL 4WD. Features: Nylon construction Black in color Includes:One Upper Right Suspension ArmOne Lower Right Suspension ArmOne Upper Left Suspension ArmOne Lower Left Suspension Arm

These are the Traxxas Pink Aluminum 4mm Flanged Wheel Nuts (4). These wheel nuts fit a wide variety of Traxxas vehicles. Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The...

This is the Traxxas Velineon VXL-3m Brushless Power System for use in Traxxas 1/16 Scale vehicles. This will not fit 1/10 scale vehicles.Like its larger 1/10 scale counterpart, the 1/16 scale Velineon VXL-3m electronic speed control and 380-size 4000 kV...

This is the Traxxas 23-T Pinion Gear (48-pitch) w/Set Screw 23-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance...

This is the Traxxas Center Differential Kit for the 1/16 E-Revo, Slash, and Summit vehicles. OverviewThe optional center differential helps balance the E-Revo VXL’s power distribution to reduce front end lift on acceleration and improve steering...

This is a package of six 3x6mm Traxxas Button Head Screws. Features: Steel construction Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x6mm button head screw is required Includes: Six...

These are the Pivot Balls and Pivot Ball Caps for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES Steel constructed pivot balls Black nylon pivot ball caps INCLUDESFour Pivot BallsFour Pivot Ball Caps REQUIRESInstallation on the...

This is the Hot Racing Complete Front and Rear Adjustable Sway Bar Set for the Traxxas 1/16 E-Revo, Slash, and Rally vehicles. This will work on brushed and VXL brushless versions. Add this sway bar set to your vehicle for improved stability through...

This is the Traxxas Steering Arm and Shock Mount Set for use on the 1/16 vehicles including the E-Revo, Slash, Summit, Mustang, Fiesta, and Rally vehicles.FEATURESNylon construction Black in...

This is the Hot Racing Aluminum Heat Sink Motor Mount for Traxxas 1/16 vehicles with 540 or 550 Motors, such as the 1/16 E-Revo, 1/16 Slash, 1/16 Rally, and 1/16 Summit.FEATURES:- CNC machined aluminum construction- Anodized black with red anodized...

This is the Traxxas Differential locker, (2). This is Traxxas part number 7381Part Number: 7381 / TRA7381Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Kyle Busch Truck1/16 Rally VXL1/16 Slash 4x41/16...

These are the Traxxas 2.5x10mm Cap-Head Hex Machine Screws. Each package includes six screws.Set of six 2.5x10 mm cap-head machine screws with hex-drive heads Replacement Part For:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit4-Tec 2.0 AWD...

This is the Hot Racing 27-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerYOU WILL...

This is the Traxxas Skid Plate Set for use on the 1/16 E-Revo and Slash VXL Vehicles. Features: Nylon construction Black in color Includes:One Front SkidplateOne Rear SkidplateOne Transmission Skid PlateTwo Steering Servo GuardsOne Steering Servo Cover...

This is the 16-T Pinion (48-pitch) Gear with Set Screw 16-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance...

This is the Hot Racing Hardened Steel 48-Tooth Spur Gear for Traxxas 1/16 vehicles like the 1/16 E-Revo, Slash, Summit, and Rally.FEATURES:- CNC machined light weight hardened steel construction- Replaces stock nylon pinion gear- Direct replacement for...

These are the Front and Rear Body Mounts and Posts for use on the Traxxas 1/16 E-Revo and Slash Vehicles.FeaturesNylon constructionBlack in colorIncludesOne Front Body MountOne Rear Body MountTwo Front Body PostsTwo Rear Body Posts

These are the Traxxas Telemetry Trigger Magnet Holders for the TQi radio system. The telemetry trigger magnet holders secures the trigger magnet to the spur gear to provide real-time RPM and speed data when combined with an RPM sensor, TQi radio with...

This is the Traxxas Cover plates, differential (front or rear)/ gaskets (2)/ o-rings (2)/ 2x14mm BCS (4). This is Traxxas part number 7080Part Number: 7080 / TRA7080Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss...

These are the Traxxas 3x15mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many different Traxxas vehicles.Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL...

This is the Front Bulkhead for use on the Traxxas 1/16 scale E-Revo and Slash Vehicles. FEATURESNylon constructionBlack in color INCLUDES Two front bulkhead halves Four 3x10mm Button Head Screws One 2.5x23mm Cap Screw  REQUIRESInstallation over...

This is a set of Traxxas Center Front and Rear Half Shafts for the 1/16 Slash and E-Revo vehicles. FEATURES: Nylon construction Black in color INCLUDES:One Front Center Half ShaftOne Rear Center Half ShaftFour U-Joints

This is the Hot Racing Aluminum Servo Saver Steering Bellcrank for the Traxxas 1/16 Revo, 1/16 4x4 Slash, 1/16 Mustang, 1/16 Rally, and 1/16 Summit. This will fit the brushed and VXL brushless versions.FEATURES:- CNC machined aluminum construction-...

This is the Hot Racing Spring Loaded Skid Plate 2-Tire Wheelie Bar for the Traxxas 1/16 E-Revo, Slash, Summit, and Rally. This will fit the 1/16 brushed and VXL brushless versions of these vehicles.FEATURES:- Aluminum construction with 2 spring loaded...

This is the Traxxas XL-2.5 Waterproof Electronic Speed Control (ESC) with Low-Voltage Detection (LVD), pre-wired with the Traxxas high-current connector. Designed and engineered by Traxxas, the XL-2.5 Electronic Speed Control delivers smooth throttle...

These are the Hot Racing Heavy Duty Aluminum Front or Rear Axle Carriers (AKA steering knuckles) for Traxxas 1/16 E-Revo, Slash 4x4, Summit, Grave Digger, Ford Fiesta, and Rally.NOTE: The disc brakes shown in photos are Hot Racing VXS21BR02 and VXS21BS02...

These are the Traxxas 3x10mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many of the Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL...

This is the 18-T Pinion (48-pitch) Gear with Set Screw 18-Tooth Pinion Gear (48-Pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance...

This is the Traxxas Caps and spring retainers, GTR shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2)). This is Traxxas part number 7065Part Number: 7065 / TRA7065Fits1/16 E-Revo Brushed1/16 E-Revo VXL...

This is the Traxxas Hollow balls, steel (machined). This is Traxxas part number 7028XPart Number: 7028X / TRA7028XFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16 Rally...

This is the Rear Bulkhead for use on the Traxxas 1/16 E-Revo and Slash Vehicles. FEATURESNylon construction, black in color INCLUDES Two Rear Bulkhead Sections Four 3 x 10mm Button Head Screws One 2.5 x 22mm  Socket Head Cap...

This is the Hot Racing Black Aluminum Rear Body Mount Post Set for Traxxas 1/16 E-Revo, Slash, and Rally vehicles. This will fit brushed and VXL brushless models of these cars.FEATURES:CNC machined aluminumBlack anodized finishYOU WILL RECEIVE:One...

This is the Traxxas Rocker arm post, steel (4). This is Traxxas part number 7155Part Number: 7155 / TRA7155Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16 Rally VXL1/16...

This is the 45T Spur Gear for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.FeaturesNylon constructionBlack in colorSpecificationsOuter Diameter: 24.75mm (0.97")Inner Diameter: 5.5mm (0.22")Width: 7mm (0.28")

These are the BellCrank Bushings for the Traxxas Nitro Jato Stadium Truck. FEATURES:Nylon constructionWhite in color INCLUDES:Four 4mm x 7mm x 2.5mm White Plastic Bushings REQUIRES:Assembly onto Vehicle

This is the Hot Racing Aluminum Rear Multi-Mount Rocker Arms for Traxxas 1/16 E-Revo, Slash, Rally, and Summit vehicles. Now you do not need to change the rocker arm to change progressive rate. Just change the mounting position.FEATURES:- CNC machined...

This is the Battery Compartment Door and Vents for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.FeaturesNylon constructionBlack in colorIncludesOne battery compartment doorTwo vents

This is the Traxxas 1/16 Blue Aluminum Front and Rear Bulkhead Tie Bars with a 2.5x6 Capscrew.Stock Replacement On1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Rally VXL1/16 Slash 4x41/16 Summit1/16 Summit...

This is the Traxxas Rocker arm set, progressive-2/ plastic bushings (8).Rocker arm set, progressive-2/ 4x7x2.5mm PB (8)Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16...

This is the Traxxas Sensor, temperature and voltage (short). This is Traxxas part number 6523Part Number: 6523 / TRA6523Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16...