This is the RC Screwz Traxxas XRT (78086-4) Rubber Shielded Bearing Kit. Protect your off-road monster from dirt, dust, mud and grime with this high-quality rubber shielded bearing kit. Rubber Shielded Bearing Kit Features: High Quality Rubber Shielded...

This is the RC Screwz Traxxas XRT (78086-4) Stainless Steel Screw Kit. RCScrewZ Stainless Screw Kits are the best way to beef up the hardware throughout your RC vehicle in one convenient package. Your new kit will include everything needed to do a full...

This is the Traxxas Black Wheel Covers for the #9572 Wheels Give your 9572-series wheels a unique look with these colorful wheel covers. Sold as a set of four. Accessory Part ForE-Revo VXL BrushlessSledge

This is the Traxxas Gray Wheel Covers for the #9572 Wheels Give your 9572-series wheels a unique look with these colorful wheel covers. Sold as a set of four. Accessory Part ForE-Revo VXL BrushlessSledge

This is the Traxxas Green Wheel Covers for the #9572 Wheels Give your 9572-series wheels a unique look with these colorful wheel covers. Sold as a set of four. Accessory Part ForE-Revo VXL BrushlessSledge

This is the Traxxas Red Wheel Covers for the #9572 Wheels Give your 9572-series wheels a unique look with these colorful wheel covers. Sold as a set of four. Accessory Part ForE-Revo VXL BrushlessSledge

This is the Traxxas Rear Bumper & Skid Plate with Tie Bar Mount Rear bumper and skid plate with tie bar mount and 3x25 mm screws (2) Includes(1) Rear Bumper(1) Rear Skid Plate(1) Rear Tie Bar Mount(2) 3x25mm Screws Replacement Part ForSledge

This is the GPM Hardened Steel #45 Motor Gear 20T for the Traxxas XRT Made with hardened steel #45 - provides strength and greater durability IncludesMotor Gear (1 pc)5*5 SST Screw (1 pc) Accessory Part ForXRTBaja Rey

This is the GPM Steel Motor Gear 19T for the Traxxas XRT Made with hardened steel #45 - provides strength and greater durability IncludesStainless Steel Screw Shaft 5x5 (1 pc) Pinion Gear (1 pc) Accessory Part ForXRTBaja Rey

This is the GPM 18T Hardened Steel #45 Motor Gear for the Traxxas XRT Made with hardened steel #45 - provides strength and greater durability IncludesMotor Gear (1 pc) 5*5 SST Screw (1 pc) Accessory Part ForXRTBaja Rey

This is the Pro-Line 8x32 to 17mm Hex Adapters for 8x32 3.8" Wheels This is a set of 8x32 to 17mm 1/2" Offset Hex Adapters. Do you need to replace your Raid 8x32 17mm hexes for your 3.8" Removable Hex Wheels? You came to the right place! This pack...

This is the GPM Orange Aluminium Front/Rear Body Post Mount - 1pc set (For Slash 4x4 LOW-CG 68086-21 Version) Includes3x8 Stainless steel button head screw - 2pcs3x10 Stainless steel button head screw - 2pcs Accessory Part ForSlash 4X4 LOW CG

This is the GPM Red Aluminium Front/Rear Body Post Mount - 1pc set (For Slash 4x4 LOW-CG 68086-21 Version) Includes3x8 Stainless steel button head screw - 2pcs3x10 Stainless steel button head screw - 2pcs Accessory Part ForSlash 4X4 LOW CG

This is the GPM Gray Silver Aluminium Front/Rear Body Post Mount - 1pc set (For Slash 4x4 LOW-CG 68086-21 Version) Includes3x8 Stainless steel button head screw - 2pcs3x10 Stainless steel button head screw - 2pcs Accessory Part ForSlash 4X4 LOW CG

This is the Traxxas Telemetry Expander Mount for the Sledge The telemetry expander mount fits over the Sledge T-Bar chassis brace to provide a secure base to mount the optional 6550X TQi Telemetry Expander. **Attaches to chassis brace (T-Bar) Accessory...

This is the Traxxas Sledge Body (Blue, Decals Applied)Painted body, decals appliedAssembled with front & rear body mounts and rear body support for clipless mounting.Accessory Part For These Models:Sledge

This is the Traxxas Sledge Body (Red, Decals Applied)Painted body, decals appliedAssembled with front & rear body mounts and rear body support for clipless mounting.Accessory Part For These Models:Sledge

This is the Traxxas Sledge Body (Graphics are printed, Requires Paint & Final Color Application) Includes: Window, Grille, Lights Decal SheetFrom mild to wild, choose your own colors to personalize your body. The detailed graphics are fully painted,...

These are the Traxxas Left and Right Stub Axle Carriers (Blue-Anodized) w/ HardwareTraxxas aluminum stub axle carriers improve the appearance and ruggedness of your Sledge. The machined billet 6061-T6 aluminum construction adds superior strength with a...

These are the Traxxas Left and Right Stub Axle Carriers (Orange-Anodized) w/ HardwareTraxxas aluminum stub axle carriers improve the appearance and ruggedness of your Sledge. The machined billet 6061-T6 aluminum construction adds superior strength with a...

These are the Traxxas Left and Right Stub Axle Carriers (Red-Anodized) w/ HardwareTraxxas aluminum stub axle carriers improve the appearance and ruggedness of your Sledge. The machined billet 6061-T6 aluminum construction adds superior strength with a...

These are the Traxxas Left and Right Stub Axle Carriers (Green-Anodized) w/ HardwareTraxxas aluminum stub axle carriers improve the appearance and ruggedness of your Sledge. The machined billet 6061-T6 aluminum construction adds superior strength with a...

These are the Traxxas Left and Right Stub Axle Carriers (Dark Titanium-Anodized) w/ HardwareTraxxas aluminum stub axle carriers improve the appearance and ruggedness of your Sledge. The machined billet 6061-T6 aluminum construction adds superior strength...

This is the Traxxas Gear CoverReplacement Part For These Models:Bandit VXLDrag SlashRustler VXLSlash VXLStampede VXL

This is the Traxxas Differential Output Gears (2)Replacement Part For These Models:Bandit VXLDrag SlashRustler VXLSlash VXLStampede VXL

This is the Traxxas Differential Gasket and X-Rings (2)Replacement Part For These Models:Bandit VXLDrag SlashRustler VXLSlash VXLStampede VXL

This is the Traxxas Wheelie Bar and Mount, Assembled (Black) Developed for drag racing, this extended wheelie bar features 5 height positions and two wheel sizes for maximum customization. Two heavy-duty mounts are included, one for the standard...

This is the Traxxas Front Bumper, Aluminum Winch for '69-'72 Blazer w/ HardwareFront winch bumper for TRX-4 1969 and 1972 Blazer trucks using the Pro Scale Winch. Includes mount, D-rings, fairlead, and hardware.Accessory Part For These Models:TRX-4...

This is the Traxxas Front Bumper, Aluminum Winch Fairlead w/ HardwareFront winch bumper for TRX-4 and TRX-6 Mercedes-Benz G 500 and G 63 trucks using the Pro Scale Winch. Includes mount, D-rings, fairlead, and hardware.Includes:2.5x10 CS (6)Accessory...

These are the Traxxas Aluminum Sledge Bellcrank Posts, Steering (Blue-Anodized) (2)Replacement Part For These Models:Sledge

This is the Traxxas Aluminum Sledge Chassis (Blue-Anodized)Replacement blue aluminum Sledge chassisReplacement Part For These Models:Sledge

These are the Traxxas Extreme Heavy Duty Wheel Hubs w/ HardwareReplacement steel wheel hubs for the Extreme Heavy Duty Upgrade Kit. *Wheel hubs are for use with the 9080 upgrade kit only and will not fit standard axles.For use with #9080 upgrade kit and...

This is the Traxxas Extreme Heavy Duty Rear Driveshaft Assembly w/ HardwareReplacement rear driveshaft for the Extreme Heavy Duty Upgrade Kit. *Driveshafts are for use with the 9080 upgrade kit only and will not fit standard suspension parts.Fully...

This is the Traxxas Extreme Heavy Duty Front Driveshaft Assembly w/ HardwareReplacement front driveshaft for the Extreme Heavy Duty Upgrade Kit. Driveshafts are for use with the 9080 upgrade kit only and will not fit standard suspension parts. Fully...

This is the Traxxas Rear Diffuser Wing (Left and Right) Rear Diffuser Includes(2) Washers(6) 3x10 mm screws Replacement Part ForXO-1

This is the Traxxas Sealed Receiver Box w/Hardware Sealed receiver box with access port Includes(2) Foam pads(1) Access plug(1) 3x10 mm screw(2) 2.5x8 mm screws (1) 3x4 mm screwSilicone grease Replacement Part ForXO-1

This is the Traxxas Rear Camber Links (TUBES Blue-Anodized 7075-T6 Aluminum) Specifications(2) TUBES Blue-Anodized 7075-T6 Aluminum (144mm)(4) Rod Ends Assembled with Steel Hollow Balls(1) 8mm Aluminum Wrench Accessory Part ForSledge

This is the Traxxas Rear Camber Links (TUBES Dark Titanium-Anodized 7075-T6 Aluminum) Specifications(2) TUBES Dark Titanium-Anodized 7075-T6 Aluminum (144mm)(4) Rod Ends Assembled with Steel Hollow Balls(1) 8mm Aluminum Wrench Accessory Part ForSledge

This is the Traxxas Rear Driveshafts, Steel-Spline Constant-Velocity, Assembled (2)Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot...

This is the Traxxas Driveshaft Assembly, Left or Right w/ Hardware (1)Fully assembled, ready to install. Comes w/ Screw Pin.Fortified for hard launches and superior durability, Extreme-Duty driveshafts are 20% larger than standard driveshafts for...