Traxxas

This is the Traxxas Aluminum Hollow Ball Set for the Revo 3.3, 1/10 E-Revo, 1/10 Summit, Jato, and Slayer trucks. Every ounce matters! Save weight with these aluminum upgrades!Features Aluminum...

This is the Traxxas 15-Tooth 1.0 Mod Clutch bell with 5x8x0.5mm Fiber Washer and 5mm E-Clip. This clutch bell requires using 5x11x4mm ball bearings.FeaturesVented clutch bellOne piece bell...

This is the Traxxas replacement Transmission Gearbox Halves for the T-Maxx 2.5R and 3.3 trucks. This set includes the two gearbox halves and rubber access plug.Features Holds all gears including the...

This is a pair of Traxxas 5x10x4mm Blue Rubber-Sealed Ball Bearings. These are used on vehicles like the 1/10 E-Revo, Revo 3.3, T-Maxx, Slayer, as well as other vehicles.FeaturesMetal bearing...

These are the Traxxas 4x20mm Button-Head Hex Drive Machine Screws. Each package includes six screws. 4x20 mm button-head machine screws with hex drive heads. Set of six.Replacement part for these...

These are the Traxxas 3x15mm Cap-Head Hex Machine Screws. Each package includes six screws. These are used as head bolts on TRX 2.5 engines, and also on other areas of many vehicles.Replacement part...

These are the Traxxas 3x30mm Roundhead Machine Screws. Each package includes six screws. These are for vehicles based on the Stampede XL-5 2WD, including the Stampede, Skully, and Craniac.Fits1/10...

This is a pair of Traxxas Front Suspension Arms for the Bandit, Nitro Rustler, and Nitro Stampede.SpecificationsLength: 3"Width: 1.2"FitsBandit VXLBandit XL-5Nitro RustlerNitro SportNitro Stampede

This is the Traxxas Slipper Tension Spring with Spur Gear Bushing and Locknut.Includes:Slipper tension spring (1)Spur gear bushing (1)4mm Locknut with nylon insert (1) FitsBandit XL-5E-MaxxNitro...

This is the Traxxas Blue Aluminum 17mm Wheel Hex Hub Set Traxxas' 17mm Hex Adapters make it easy to install a wide range of wheel and tire combinations on your Traxxas vehicle. Installation is simple...

This is the Traxxas Receiver Box Seal Kit for Slash 2WD, E-Revo, and Summit trucksIncludesSilicone rectangle shaped O-ringSilicone greaseTwo sections of foam rubberInstruction sheetFits1/10 E-Revo...

These are the Traxxas Maxx Tires with Foam Inserts for 3.8" T-Maxx/E-Maxx/Revo Wheels. These will fit 3.8" wheels with the Traxxas bead.Outside Diameter: 6.3"Includes: Two tires with foam...

This is a pair of Traxxas GTR Shock Springs (Long .810 Pink) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks. Shock springs for 1/10 scale long GTR shocks use high-quality spring steel...

This is a pair of Traxxas GTR Shock Springs (XX-Long .711 Orange) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks. Shock springs for 1/10 scale XX-long GTR shocks use high-quality...

This is the Traxxas Blue Aluminum Rear Shock Tower for the Slash 4x4, 1/10 Rally, Stampede 4x4, and Telluride trucks. Made of precision-machined 7075-T6 aluminum and anodized blue, these look great...

This is a Traxxas Rear Shock Tower for the Slash 4x4 and Stampede 4x4 trucks.FEATURES:Hardened plastic constructionBlack in colorINCLUDES: One rear shock towerREQUIRES: Installation on...

This is the Traxxas Driveshaft Rebuild Kit for the Revo, T-Maxx 3.3, and E-Maxx vehicles that have been upgraded with the aftermarket Traxxas steel driveshaft set (part TRA5451R). These are...

This is the Traxxas Bellcrank Bushings (Plastic) set (5x8x2.5mm) (4) Includes: Set of four 5x8x2.5 mm bellcrank bushings

These are the Traxxas Left and Right Axle Carriers for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. Features: Nylon construction Black in color Includes:One Left Axle CarrierOne Right...

This is the Traxxas Front and Rear Skidplate for the Slash. This skidplate bolts to the chassis and the bulkheads and provides protection to the front differential. Features: Skidplate is...

This is a set of Traxxas Axle Carriers and Steering Blocks for the Traxxas Revo, T-Maxx 3.3, and E-Maxx 3905. The axle carriers and steering blocks support the stub axles and bolt to the upper...

This is a Traxxas Shock Tower for the all versions of the T-Maxx and E-Maxx. This is for use with rectangular body posts. Features: Plastic construction Includes:(1) Shock...

This is a pair of replacement Toe Links for the Traxxas Revo Truck.  These adjust the position of the toe on the vehicle. FEATURES Steel turnbuckle design 5.0mm diameter INCLUDESTwo...

These are the Rear Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx & E-Maxx X FEATURES Constructed of steel, polished natural finish INCLUDESTwo Rear Turnbuckles/Toe Links for the Traxxas...

These are the Front Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx FEATURES Constructed of steel, polished natural finish INCLUDESTwo Front Turnbuckles/Toe Links for the Traxxas 3.3...

These are the Steering Servo Horns and Turnbuckles from Traxxas. FEATURES:Nylon construction, black in color INCLUDES:Two long steering servo hornsTwo short steering servo hornsTwo 3x20mm...

This is the Traxxas #3652 Rear Stub Axle Carrier that comes included with the Bandit XL-5, Rustler XL-5, and Stampede 2WD XL-5 trucks that use bushings instead of bearings. If your truck has...

This is the Battery Box for the Traxxas T-Maxx 4WD Radio Control Monster Truck. This battery box mounts to the chassis and protects the battery pack from dirt and moisture. Fits both old and new...

These are Aluminum Hex Wheel Hubs for the T-Maxx and E-Maxx Truck Kits. FEATURES:Blue anodized.Machined 6061 T-6 aluminum construction.Packaged in foam, on a bubble sealed header card. INCLUDES:Four...

These are hardened steel drive yokes for the Traxxas Rustler and Stampede. FEATURES:Hardened steel construction and is stronger than stock parts.These yokes also come with U-Joints pre-installed for...

This is the is a pair of Traxxas Steering Blocks for Bandit XL-5 buggies. They are made of black reinforced nylon and are what the front axles go through.PACKAGE INCLUDES: Two steering blocks (one...

This is a pair of 2.8" Twin-Spoke Rear Wheels for the Traxxas Jato 2.5 and 3.3 trucks.  These are stock replacement wheels.FEATURES: Nylon constructionChrome platedFive split spoke wheel...

This is a Traxxas Jato 2.5 and 3.3 Fuel Tank Cap, Pull Ring, and Fuel Line Pinch Clip.

This is a Traxxas Jato 2.5 and 3.3 Stock Replacement Front Shock Tower.

This is a set of two (2) Traxxas Jato Rear GTR Shock Springs with the 1.6 Blue Weight Rating.

This is a pair of 5.9 rate (blue) Shock Springs for the Traxxas Revo. FEATURES:Red in color (small blue square indicates spring type)Metal construction INCLUDES:2 springs REQUIRES:Installation on the...

This is the Fuel Tank Rebuilt Kit for the REVO from Traxxas. FEATURES:Rubber, slicone, plastic, & nylon construction INCLUDES:Mounting post (1)Grommets (2)Tank gaurd (1)Mounting clips (2)O-ring...

This is a Traxxas Progressive 1 Rocker Arm Set for the Revo 2.5 and 3.3 trucks.  These fit TRA5318 and TRA5318X pushrods.  If you need the pushrods too, search...

This is the Clutch Bell with Washer and E-Clip for the Traxxas Revo. FEATURES:Metal constructionFive cooling holes on the face of bell (bellow the teeth) INCLUDES:One clutch bellTwo teflon washerTwo...

This is a Traxxas T-Maxx Brake Pad Set for the T-Maxx .15 and 2.5 trucks.  These are stock replacements.  These brake pads fit on each side of the brake disc and bolt to the rear of the...