Traxxas

These are the Traxxas 3x35mm Cap-Head Hex Machine Screws (6) for use on the Traxxas E-Revo 2.0 trucks.Stock Replacement OnE-Revo 2.0

These are the Traxxas Blue Front Springs (2) for Long Ultra Shocks found on vehicles like the Stampede, Craniac, Skully, Bigfoot, and other trucks based on the Stampede chassis. Accessory Part...

This is a set of four Traxxas 17mm Splined Serrated Green Aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the...

This is the Traxxas TRX-4 Scale Crawler Differential Gear Set. This set consists of 2 diff output gears, 4 spider gears, and 2 spider gear shafts.Includes2 Diff Output Gears4 Spider Gears2 Spider...

This is the Traxxas TRX-4 Scale Crawler Differential Ring and Pinion Gear Set. These diff gears can be used in the front or rear.Stock Replacement OnTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land Rover...

This is a pair of Traxxas TRX-4 Crawler GTS Rear 0.54 Rate Green Stripe Shock Springs. These have a natural finish.FitsTRX-4

This is the Traxxas Black Complete Wheelie Bar. Wheelie bar comes assembled with wheelsFitsX-Maxx 6SX-Maxx 8SXRT

This is the Traxxas Red Aluminum Stub Axle. Add a touch of style to your X-Maxx or XRT with these brightly-anodized aluminum stub axles.  For use with 8s-spec heavy duty driveshaft (#7750X) only...

These are the Traxxas X-Maxx 8S Battery Compartment Spacers and Foam Pads. This includes two battery compartment spacers, four foam blocks, and two foam pads.

This is the Traxxas Aton Green High Visibility Decal Set. Brighten up your Aton and give it a customer look with this decal set!

This is the Traxxas Aton Brushless Motor. This is Traxxas part number 7934Part Number: 7934 / TRA7934FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual to confirm vehicle...

This is the Traxxas X-Maxx Slipper Pressure Plate and Hub.FeaturesCast metal constructionInstalls on transmission input shaft and connects to spur gearIncludesPressure PlateHubPin

This is the Traxxas X-Maxx Motor Mount and Pin Set. This includes the front and rear motor mount, and two steel pins.Features Two-piece molded composite plastic construction Attaches to rear...

This is the Traxxas Bulkhead, front & rear / differential housing, front & rear.Front and rear bulkheads with front and rear differential housing coversReplacement Part For1/18 LaTrax Desert...

This is the Traxxas LaTrax Carbon Fiber Chassis Conversion Kit with chassis, upper chassis, battery hold down, adhesive foam tape, and hardware. Dramatically increase the stiffness and precision of...

This is the Traxxas Nerf bars, chassis (2). This is Traxxas part number 7423Part Number: 7423 / TRA7423Fits1/10 RallySlash 4x4 (low-CG)Slash 4x4 PlatinumSlash 4x4 UltimateMore detail coming soon!...

This is the Traxxas Spring, shock (GTR) (1.02 rate, double black) (1 pair). This is Traxxas part number 7143Part Number: 7143 / TRA7143Fits1/16 Slash 4x4More detail coming soon! Please check your...

This is the Traxxas Spring, shock (GTR) (0.94 rate, double tan) (1 pair). This is Traxxas part number 7142Part Number: 7142 / TRA7142Fits1/16 Slash 4x4Funny CarMore detail coming soon! Please check...

This is the Traxxas Gear set, differential (output gears (2)/ spider gears (3))/ differential output shafts (2)/ 1.5x6mm pin (3)/ 1.5x8mm pin (2). This is Traxxas part number 7082Part Number: 7082 /...

This is the Traxxas Tires & wheels, assembled, glued (S1 ultra-soft off-road racing compound) (SCT Split-Spoke satin chrome, black beadlock style wheels, BFG Mud-Terrain tires, foam inserts) (2)...

This is the Traxxas Tires, Kumho (dual profile 4.3x1.7- 2.2/3.0') (2)/ foam inserts (2).Replica 4.3″ x 1.7″ Kumho tires are designed for SCT wheels with a dual profile outer 2.2″...

This is the Traxxas Bulkhead tie bars, front & rear, aluminum (blue-anodized). Set of front and rear bulkhead tie bars with a brilliant blue anodized finishReplacement part forFord Fiesta ST...

This is the Traxxas Tires & wheels, assembled, glued (SCT black, orange beadlock wheels, dual profile (2.2' outer, 3.0' inner), SCT off-road racing tire, foam inserts) (2) (4WD f/r, 2WD rear) (TSM...

This is the Traxxas Center Wing Mount with Washers for 1/10 E-Revo and Revo 3.3 trucks.IncludesOne Center Wing MountTwo Beveled Nylon Wing Washers Replacement Part ForE-Revo VXL Brushless Accessory...

This is the Traxxas Steering Arm Mount and Stops for the 1/10 E-Revo, Revo 3.3, Summit, and Slayer trucksFits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitRevo 3.3SlayerSlayer Pro

This is a pair of Traxxas Red Aluminum Front and Rear Bulkhead Tie Bars for use on 1/10 E-Revo, Summit, Revo 3.3, and Slayer trucks.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitRevo 3...

This is a pair of Traxxas Talon Tires with Foam Inserts, Pre-Mounted on 3.8" Satin Wheels with 14mm Hex Hubs. These can be used on 1/10 E-Revos, Revo 3.3, E-Maxx, and T-Maxx trucks using 14mm hexes...

This is a pair of Traxxas 7075-T6 Black Aluminum Rear 124mm Toe Link Tubes with Rod Ends and Wrench for the T-Maxx 2.5R, 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucks with the sealed pivot ball...

This is the Traxxas Wide Ratio Gear Set for the 1/10 E-Revo, Summit, and E-Maxx Trucks. It consists of a 26-tooth first gear, and 13-tooth input gear.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10...

This is a package of six Traxxas 4x14mm Button-Head Hex Machine Screws.Replacement part for these modelsE-Revo VXL BrushlessFord Fiesta ST RallyHoss 4X4 VXLMaxxRevoRustler 4X4 VXLSlash 4X4...

This is the Traxxas Velineon 380 Brushless Motor Rebuild Kit for the 1/16 brushless system. It includes two 4x9x4mm ball bearings, two 2x6mm screws with threadlock, and two front shims.Includes:Two...

This is a pair of Traxxas Bandit Rear White Dish Wheels. These feature a slot in the hub to slide over the axle pin on the Bandit XL-5 and VXL buggies. They are also dyeable to create a custom...

This is the Traxxas Rear LED Light Harness with Six Lights for use on the Summit 1/10 TruckFeatures: JST ConnectorIncludes:One Rear HarnessSix Clear LED LightsThree Zip TiesOne Wire Clip

This is a Long Spring Set for GTR Shocks used on the Traxxas Summit Monster Truck.FeaturesSteel constructionRed in color5.4 damping rateDouble orange stripe markingIncludesTwo Long Springs for the...

This is a Traxxas Rod End Set for the optional GTR shocks on the Revo. Features: Plastic construction Black in color Includes: Six Rod Ends Specifications:Length: 18.35mm (0.72")Width at ball...

This is the Traxxas EZ-Start 1 Quick Connector Stock Replacement Wiring Harness. Features: All wires included in an EZ starting system Includes:One complete wire set with connectorsTwo zip tiesOne...

This is a pair of Assembled and Glued Tires and Wheels for the Traxxas Summit. FEATURES Canyon AT tires with angular lugs Geode chrome plated plastic wheels with 17mm hex INCLUDESTwo Tires...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Front, +20% Rate, Blue (2). Features Custom wound for Slash 4X4 Progressive-rate design allows small-bump compliance without...

This is the Rear Plastic Skidplate for the T-Maxx 3.3. FEATURES Attaches to and protects chassis and supports the rear bulkhead Skidplate is gray in color INCLUDESSkidplate and stainless steel...

This is the Front Body Mount Posts, Rear Body Mount and four Screw Pins for the Traxxas T-Maxx 3.3R. FEATURES Constructed of plastic these posts and mount attach the body to...