Traxxas

This is a pair of Traxxas Talon Tires with Foam Inserts, Pre-Mounted on 3.8" Satin Wheels with 14mm Hex Hubs. These can be used on 1/10 E-Revos, Revo 3.3, E-Maxx, and T-Maxx trucks using 14mm hexes...

This is a pair of Traxxas 7075-T6 Black Aluminum Rear 124mm Toe Link Tubes with Rod Ends and Wrench for the T-Maxx 2.5R, 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucks with the sealed pivot ball...

This is the Traxxas Wide Ratio Gear Set for the 1/10 E-Revo, Summit, and E-Maxx Trucks. It consists of a 26-tooth first gear, and 13-tooth input gear.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10...

This is a package of six Traxxas 4x14mm Button-Head Hex Machine Screws.Replacement part for these modelsE-Revo VXL BrushlessFord Fiesta ST RallyHoss 4X4 VXLMaxxRevoRustler 4X4 VXLSlash 4X4...

This is the Traxxas Velineon 380 Brushless Motor Rebuild Kit for the 1/16 brushless system. It includes two 4x9x4mm ball bearings, two 2x6mm screws with threadlock, and two front shims.Includes:Two...

This is a pair of Traxxas Bandit Rear White Dish Wheels. These feature a slot in the hub to slide over the axle pin on the Bandit XL-5 and VXL buggies. They are also dyeable to create a custom...

This is the Traxxas Rear LED Light Harness with Six Lights for use on the Summit 1/10 TruckFeatures: JST ConnectorIncludes:One Rear HarnessSix Clear LED LightsThree Zip TiesOne Wire Clip

This is a Long Spring Set for GTR Shocks used on the Traxxas Summit Monster Truck.FeaturesSteel constructionRed in color5.4 damping rateDouble orange stripe markingIncludesTwo Long Springs for the...

This is a Traxxas Rod End Set for the optional GTR shocks on the Revo. Features: Plastic construction Black in color Includes: Six Rod Ends Specifications:Length: 18.35mm (0.72")Width at ball...

This is the Traxxas EZ-Start 1 Quick Connector Stock Replacement Wiring Harness. Features: All wires included in an EZ starting system Includes:One complete wire set with connectorsTwo zip tiesOne...

This is a pair of Assembled and Glued Tires and Wheels for the Traxxas Summit. FEATURES Canyon AT tires with angular lugs Geode chrome plated plastic wheels with 17mm hex INCLUDESTwo Tires...

This is the Rear Plastic Skidplate for the T-Maxx 3.3. FEATURES Attaches to and protects chassis and supports the rear bulkhead Skidplate is gray in color INCLUDESSkidplate and stainless steel...

This is the Front Body Mount Posts, Rear Body Mount and four Screw Pins for the Traxxas T-Maxx 3.3R. FEATURES Constructed of plastic these posts and mount attach the body to...

This is the optional Blue Traxxas Resonator Dyno-Tuned Performance Pipe for the Traxxas Jato, Nitro Rustler and Nitro 4-Tec with TRX Racing Engines. FEATURES:The Traxxas Resonator aluminum tuned pipe...

This is the Receiver Box for the T-Maxx 3.3. FEATURES:Holds receiver and Optidrive Shift Module in placeTwo piece, gray in color, constructed of hardened plastic INCLUDES:Receiver Box and Body...

These are the Traxxas Tubes Lightweight Red Aluminum Turnbuckles for the Traxxas T-Maxx 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucks.FEATURES: 30% lighter than stock steel toe links 4 times...

This is an optional Wheelie Bar Mount for the Traxxas Electric Stampede, Rustler and Bandit. FEATURES:Constructed of hardened plastic, black in colorInstalls at rear of chassis to hold wheelie bar...

This is Traxxas Rod Ends Short Hollow Balls Set of six short rod ends with hollow ball connectors Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No. 1...

This is a package of Aluminum Pushrod Spacers for the Traxxas Revo. These are installed on the Progessive suspension system. FEATURES:Red anodized aluminum construction INCLUDES:Eight 4x6x3mm...

This is a Traxxas Jato 2.5 and 3.3 Shim Set.  This includes four silver metal hollow balls and four 3mm silver washers.  These are for adjusting the roll center of the truck.

This is the Traxxas Polished Aluminum Resonator Dyno-Tuned Performance Pipe for the Revo 2.5 and 3.3 monster trucks.  This gives the Revo nearly 20% more power on the bottom-end, where...

This is a Traxxas T-Maxx Slide Carb Linkage Set, including the throttle link, brake link, and hardware. This works on T-Maxx 2.5 and 3.3 trucks with a slide carb.IncludesOne long linkage wire...

This is a pair of Traxxas Jato 2.5 and 3.3 Throttle Return Springs.  You don't want to run a truck without this on it.

This is a Traxxas Heavy Duty Servo Saver Spring for the Revo 2.5 and 3.3.  This servo saver spring should be used when using metal geared servos.

This is a Traxxas Revo Transmission Skid Plate and Roll Hoop Set for the Traxxas Revo 2.5 and 3.3 trucks.  If you crack or break these, you should always fix them.  Without fixing...

This is the Traxxas Complete Stock Replacement Carburetor for the Traxxas TRX 2.5 and TRX 3.3 Engines.  A damaged carburetor will severely decrease the power of your engine...

This is a Traxxas Lower Chassis Brace Set for the Traxxas T-Maxx .15, 2.5, S-Maxx, Stadium Maxx, and E-Maxx (model 3906).  These are stock replacements...

This is the Traxxas 2085XL Digital High-Torque Metal Gear (Ball Bearing) Waterproof Servo Servo, digital high-torque, metal gear (ball bearing), waterproof/ servo saver spring/ steering link Servo...

This is the Traxxas 6061-T6 Aluminum (Red-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for...

This is the Traxxas 6061-T6 Aluminum (Green-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for...

This is the Traxxas 6061-T6 Aluminum (Gray-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for...

This is the Traxxas 6061-T6 Aluminum (Blue-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for...

This is the Traxxas 6061-T6 Aluminum (Orange-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for...

This is the Traxxas TRX-4m 6061-T6 Aluminum (Silver-Anodized) 1″ Beadlock Wheels Take your TRX-4M to the next level with these silver-anodized aluminum beadlock wheels. Made from tough 6061-T6...

This is the Traxxas Front Clipless Body Mount Adapter with Inserts Front clipless body mount adapter with inserts (2) Replacement Part ForFord F-150 Raptor R 4X4

This is the Traxxas Caster Blocks Left & Right (C-Hubs) These left and right caster blocks (C-hubs) were redesigned and beefed-up for XRT. Standard in XRT, they can be used to upgrade X-Maxx for...

This is the Traxxas Front or Rear Center Driveshafts Rebuild Kit (Steel Constant-Velocity) For #9655X steel CV driveshafts Rebuild kit for 9655X steel CV center driveshafts includes hardware to...

This is the Traxxas Center Assembled Driveshaft (Steel Constant-Velocity) Give your Sledge the ultimate driveline upgrade with these heavy-duty center CV (constant velocity) driveshafts. Made from...

This is a set of four Traxxas TRX-4 Satin Aluminum 2.2" Beadlock Rings with 2x10 Capscrews (48) for use with Traxxas 2.2" Beadlock Wheels, such as the Method 105 wheels.Accessory Part ForTRX-4...

These are the Traxxas TRX-4 Rear Heavy Duty Chromoly Axles. These are for use with the TRA8065 machined rear portal input drive gears.Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land...