Traxxas

These are the Traxxas TRX-4 Ford Bronco Chrome 1.9" Wheels (2), Center Caps (2) and Decals. These must be used with the #8255A extended stub axles (stock on TRX-4 Bronco)Stock Replacement OnTRX-4...

This is the Traxxas TRX-4 Scale Crawler Differential Gear Set. This set consists of 2 diff output gears, 4 spider gears, and 2 spider gear shafts.Includes2 Diff Output Gears4 Spider Gears2 Spider...

This is the Traxxas TRX-4 Scale Crawler Differential Ring and Pinion Gear Set. These diff gears can be used in the front or rear.Stock Replacement OnTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land Rover...

This is a pair of Traxxas TRX-4 Crawler GTS Rear 0.54 Rate Green Stripe Shock Springs. These have a natural finish.FitsTRX-4

This is a Traxxas Jato 2.5 and 3.3 Shim Set.  This includes four silver metal hollow balls and four 3mm silver washers.  These are for adjusting the roll center of the truck.

This is the Traxxas TRX-4 Wide Inner Fenders (Front and Rear) Wide inner front and rear fenders for clipless TRX-4 bodies. Includes: Rock light covers (8), Battery plate, and 3x8 screws (4)

This is the Traxxas (1979) Ford F-150 Clear Body with Accessories (Includes grille, side mirrors, door handles, windshield wipers) From mild to wild, Traxxas clear bodies are your own personal canvas...

This is a set of four Traxxas TRX-4 Black Aluminum 2.2" Beadlock Rings with 2x10 Capscrews (48) for use with Traxxas 2.2" Beadlock Wheels, such as the Method 105 wheels. Accessory Part ForTRX-4...

This is a set of four Traxxas TRX-4 Satin Aluminum 2.2" Beadlock Rings with 2x10 Capscrews (48) for use with Traxxas 2.2" Beadlock Wheels, such as the Method 105 wheels.Accessory Part ForTRX-4...

These are the Traxxas TRX-4 Rear Heavy Duty Chromoly Axles. These are for use with the TRA8065 machined rear portal input drive gears.Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land...

These are the Traxxas TRX-4 Front Heavy Duty Chromoly Left and Right Axle Shafts. These can only be used with the TRA8064 machined portal drive input gear.Accessory Part ForTRX-4 Crawler KitTRX-4...

These are the Traxxas TRX-4 Inner Fenders, Rock Light Covers, Battery Plate and 3x8 Screws (4). This is the stock set found on the TRX-4 Ford Bronco. Front and rear inner fenders for the TRX-4 with...

This is a pair of Traxxas TRX-4 White Stripe 0.30 Rate GTS Shock Springs (natural finish).Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land RoverTRX-4 Tactical

These are the Traxxas TRX-4 Crawler Left and Right Front Inner Portal Drive Housings and 2.5x4mm Screws (6).FitsTRX-4

This is the Traxxas Auto-Detectable Smart Voltage Sensor.  The auto-detectable voltage sensor plugs into the optional TQi Telemetry Expander to provide real-time voltage data while you drive...

This is the Traxxas Front and Rear Inner Fenders Front and rear inner fenders for bodies with clipless mounts. Includes Rock Light Covers (8) Replacement Part ForTRX-4 1972 Chevrolet Blazer High...

This is the Traxxas Front Chrome Bumper w/ Mount: TRX-4 High Trail Edition Replacement front chrome bumper for 9830-series TRX-4 F-150 High Trail edition bodies. IncludesFront Chrome BumperBumper...

This is the Traxxas 12-T Pinion Gear (32-pitch) w/ Set Screw 12-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of...

This is the Traxxas Multi-tool (plastic) The plastic multi-tool can be used to loosen castle nuts as well as upper and lower shock caps. Replacement Part ForE-Revo VXL BrushlessHoss 4X4...

This is the Traxxas 15-T Pinion Gear (32-pitch) w/ Set Screw 15-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of...

This is the Traxxas Shovel, Axe, Accessory Mount and Hardware for use on the TRX-4 scale & trail truck bodies.Accessory Part ForTRX-4 Crawler KitTRX-4 Chevy BlazerTRX-4 Ford BroncoTRX-4 Land Rover...

This is the Traxxas TRX-4 Front Machined Portal Drive Input Gear (left or right). These must be used with the TRA8060 chromoly axles.Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land...

This is the Traxxas TRX-4 Machined Steel Underdrive Differential Ring and Pinion Gear Set. This can be used in the front and rear diff on the TRX-4. Use of this set will increase torque at the...

This is the Traxxas TRX-4 Ford Bronco Chrome Push Bar for use with the Traxxas #8069 Bumper. Give your truck a rugged new look with this chrome bumper push bar. Accessory Part ForTRX-4 1979 Ford...

This is the Traxxas 10-Tooth 32-Pitch Steel Pinion Gear with Set Screw.Stock Replacement OnStampede 4x4 XL-5Accessory Part ForStampede 4x4 VXLTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land RoverTRX-4...

This is the Traxxas TRX-4 LED Headlight and Taillight Kit. This light set must be used with the Traxxas #8028 Power Supply. Whether you're using your trail rig at night, or just looking to have the...

This is a set of two Traxxas TRX-4 Crawler Red Fuel Canisters and a mounting Screw Pin.FitsTRX-4

This is full set of four Traxxas 1/16 GTR Hard-Anodized Aluminum Adjustable Shocks with TiN Shafts and PTFE-coated Bodies.  Shock oil is included.  These are the ultimate shock upgrade for...

This is the Traxxas Front Winch Bumper: TRX-4 Sport Mount the 8855 Pro Scale Winch to your TRX-4 Sport using this 191mm front winch bumper. The bumper comes assembled and ready to mount with D-rings,...

This is the Traxxas Front Winch Bumper: TRX-4 1979 Bronco and 1979 Blazer with #8855 winch Mount the 8855 Pro Scale Winch to your TRX-4 1979 Bronco or 1979 Blazer using this 217mm front winch bumper...

This is the Traxxas Pro Scale Winch Kit with Wireless Controller Powerful, Realistic Winch Capability for Traxxas TRX-4 and TRX-6 The new Pro Scale Winch puts the TRX-4 and TRX-6 even further over...

This is the Traxxas TRX-4 Sport Two-Speed Conversion Upgrade Kit. This adds the ability to switch from high to low range gearing in seconds from your transmitter. The set includes all the necessary...

This is the Traxxas TRX-4 Rear Machined Portal Drive Input Gear (left or right). These must be used with TRA8063 chromoly rear axles.Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land...

This is the Traxxas TRX-4 Chassis Extension / Conversion Kit to extend your TRX-4 chassis from 312mm (12.3") to 324mm (12.8"). The kit includes rear upper & lower suspension links, front & rear...

This is the Traxxas TRX-4 Scale Crawler Rear T-Lock Cable.Stock Replacement OnTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land Rover DefenderTRX-4 TacticalAccessory Part ForTRX-4 Sport

This is the Traxxas TRX-4 Roof Basket for use with the #8011 Series Bodies and #8216 ExoCage.FitsTRX-4

These are Traxxas 12x18x4mm Black Rubber Sealed Ball Bearings (2). Each package contains two bearings. Includes: a Pair of 12x18x4 mm black rubber seal ball bearings. A step above blue-seal...

This is the Traxxas 3x8mm Hex Cap Screws with Washers Upgrade your Phillips-head motor mount screws with these 3x8 mm cap-head machine screws and washers. Includes wrench. Includes (6) Washers (6)...

This is the Traxxas TRX-4 Orange 1979 Chevrolet Blazer Complete Body The TRX-4 1979 Chevrolet Blazer body comes fully painted with pre-applied decals. ProGraphix bodies come...

These are the Traxxas Method 105 Charcoal Gray Beadlock 2.2" Wheels (beadlock rings sold separately) for the Traxxas TRX-4 and other 1/10 rock crawlers. The wheels have a standard 12mm hex.Accessory...