Traxxas

This is a pair of Traxxas 5x8x2.5mm Blue Rubber Sealed Ball Bearings. These fit a large number of Traxxas 1/10 and 1/16 scale vehicles.Includes: (2) 5X8mm ball bearingsSpecificationsInside diameter:...

This is the Long Temperature and Voltage Sensor for the Traxxas TQi system. To read voltage on electric vehicles, this must be used with the Traxxas part TRA6541 Power Tap. The temperature/voltage...

This is a package of replacement Traxxas 5x8mm Teflon Washers  Set of 20 PTFE-coated 5x8x0.5 mm washers for use with bearings. FEATURES:Black teflon construction.Used on the axles and in the...

These are rubber cap diaphragms for Traxxas plastic shocks. These also work well with some Associated aluminum shocks. Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit...

These are the Shoulder Screws for the Traxxas T-Maxx 3.3. Set of six 3x12 mm shoulder screws (shock attachment screws) with hex-drive heads. FEATURES Black steel construction INCLUDESSix steel...

This is the Traxxas TQi Transmitter Traxxas Link Enabled 2.4GHz High Output 3-Channel (Transmitter Only) TransmitterTQi Traxxas Link enabled, 2.4GHz high output, 3-channel

This is the Traxxas Transmitter TQi Traxxas Link enabled 2.4GHz high output 2-channel (Transmitter Only) The 2-channel TQi transmitter combines a full complement of tuning features with the...

This is the Traxxas TQ 2.4GHz 2-Channel Transmitter.   (Transmitter Only) Switch on the power and drive! That's all there is to it with the TQ 2.4GHz radio. There are no frequencies to...

This is the Traxxas TQ 2.4GHz 3-Channel Transmitter.   (Transmitter Only) Switch on the power and drive! That's all there is to it with the TQ 2.4GHz radio. There are no frequencies to...

This is the Traxxas 7.2V 3000mAh NiMH Battery with iD Connector. This is stock replacement battery for the Traxxas Blast boat.Features:New high current connector with gold-plated copper terminalsiD...

This is the Traxxas 3000mAh 7.4v 2-Cell 20C LiPo Battery Traxxas Certified iD-equipped LiPo batteries provide the punch and on-demand power to reach the top speeds that Traxxas models are built to...

This is the Traxxas 5000mAh 7.4v 2-Cell 25C LiPo Battery (short/137mm). This new shorter design allows this 2S 5000mAh pack to fit in tighter compartments, making it a great option for Stampede 2WD,...

These are the Traxxas 3655X Left and Right Suspension Arms, for the Rustler (rear), Stampede 2WD (rear), Stampede 4x4 (front/rear), Slash 4x4 (front/rear), 1/10 Rally (front/rear), 1/10 Monster Jam...

These are the Traxxas electric Rustler & Stampede 2WD Rear Talon Extreme Tires Mounted on Black 2.8" Wheels with 12mm Hexes. These are set up for use on the REAR only. The tires come pre-glued to...

This is the Traxxas Red Aluminum Turnbuckle set for the Rustler, Rustler VXL, Stampede 2WD, Stampede VXL, and Bigfoot trucks.FEATURES: Anodized aluminum construction Red in color Black nylon ball...

This is a set of Traxxas Stub Axle Pins.  These pins slide through the axle and keep the wheel hexes from spinning on the axle. Set of four stub axle pins Replacement Part For4-Tec 2.0 AWD...

This is a Traxxas 48P, 90T Spur Gear for models with Torque Control Slipper Clutch. FEATURES:48 pitch90 toothDesigned for models with a slipper clutchBlack plastic construction INCLUDES:One spur...

This is the Traxxas 21-Tooth Pinion Gear (48-pitch) with set screw.Fits:1/10 Monster Jam Trucks1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave...

This is the Traxxas Antenna Cap Set with Antenna Spool. The antenna spool is used for wrapping excess antenna wire before inserting it in the antenna tube to prevent wire from hanging out the end of...

These are the optional Traxxas Blue Aluminum 59mm Turnbuckle Toe Links for the Traxxas 1/10 Slash 2WD, Rustler XL-5 & VXL trucks.Traxxas aluminum turnbuckles make it easy to add strength and...

This is a Traxxas Front Bumper. This bumper fits many different vehicles, including the Stampede 2WD, Rustler, Bandit, and many nitro vehicles.Fits1/10 Monster Jam TrucksBandit VXLBandit...

This is pack of Traxxas DC Charger 5-Amp Fuses (2). These are replacements for use in the 2-amp and 4-amp DC 12-volt cigarette-lighter style quick chargers included with many of the Traxxas electric...

This is the Traxxas 6-Cell 7.2V 4200mAh iD NiMH Battery Pack. This is a great way to extend the run-time on the Traxxas Blast boat. This can also be used in vehicles like the Slash, Rustler,...

This is the Traxxas 17mm Splined Wheel Nut Wrench. This is a must-have for vehicles equipped with 17mm wheel nuts. Use this splined wheel wrench for extra leverage on 17 mm hex nuts. Replacement Part...

This is the Traxxas Front and Rear Adjustable Body Mount Post Set. Front and rear adjustable body mounts with body posts. Includes(4) 2.5x18 mm screw pins Replacement Part ForBigFootDrag Slash 1967...

This is a Traxxas Steel Slipper Clutch Shaft for the Slash, Rustler, and Stampede vehicles. Features: Steel construction Roll pin pre-installed Includes: One slipper clutch...

These are the Traxxas Red Aluminum Wheelie Bar Wheels and Rubber Tires for the Traxxas Wheelie Bars (model 4975 and 3678) for all Traxxas T-Maxx, E-Maxx, Jato, Slash 2WD, Slash 4x4, Rustler, Stampede...

These are the Traxxas Black Shock Caps with Hollow Balls (4). These come stock on the Ultra Shocks on the 4-Tec 2.0 vehicles like the Ford GT and Mustang GT, but will also work with other vehicles...

This is the Slipper Clutch Rebuild Kit for the Traxxas Vehicles. The slipper clutch rebuild kit refreshes the standard-duty slipper clutch with a new disc, friction pads (3), springs (2), dowel pin,...

These are the Traxxas Fixed Gear Ratio Adapters for use with 2WD Electric vehicles, including Bandit, Rustler, Slash, Stampede, and Bigfoot trucks. Take the guesswork out of setting gear mesh and...

This is the Traxxas aluminum blue-anodized shock caps Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined caps fit...

This is a set of 12 Traxxas 3mm Locking Nuts. These feature chrome nylon locking nuts. Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBIGFOOT No. 1 Officially...

This is the Traxxas Stinger 20-Turn 540 size motor used in many Traxxas vehicles. This can be used in the Bandit XL-5, Stampede XL-5, Rustler XL-5, Monster Jam Replicas, Blast Boat, and others...

This is the Traxxas 2075X Digital High-Torque Metal Gear Waterproof Ball Bearing Servo. This is the stock steering servo on the TRX-4 Trail Crawler. It can be used as an upgrade for any 1/10 Traxxas...

This is a set of Traxxas Long Rod Ends with Hollow Ball Connectors. Each package contains six rod ends and six hollow balls.Fits1/10 Monster Jam Trucks1/10 RallyBandit XL-5CraniacE-MaxxNitro...

This is a Traxxas 48P, 86T Spur Gear for models with Torque Control Slipper Clutch. FEATURES:48 pitch86 toothDesigned for models with a slipper clutch.Black plastic construction INCLUDES:One spur...

This is a pair of the Traxxas Rear All Star Black Chrome Wheels with Anaconda Tires for vehicles like the Stampede and Rustler XL-5 and VXL. FEATURES:Black chrome plated plastic, five spoke...

This is the Traxxas Temperature Sensor Mount for Electric Motors when using the TQi Telemetry System. Includes: Mount, Plastic Tie, and Thermal Pad The temperature sensor mount secures the...

These are the Traxxas Blue Aluminum Turnbuckles with rod ends for the 1/10 Stampede XL-5 and VXL 2WD trucks.Traxxas’ aluminum turnbuckles make it easy to add strength and adjustability to your...

This is a Pair of Stock Replacement Front Axles for the Rustler and Stampede. These are located in the front steering blocks. FEATURES Steel construction Natural color INCLUDESTwo front...