Traxxas

This is the Traxxas 2-Amp Wall Charger and 3000mAh 7-Cell 8.4V Hump Pack Battery Completer Set. This set is perfect to go with vehicles like the Bandit, Stampede 2WD, Stampede 4x4, Rustler, Bigfoot,...

This is a 31 Tooth, 48 Pitch Pinion Gear with Set Screw from Traxxas. FEATURES:Steel construction, silver in color INCLUDES:One 31 Tooth, 48 Pitch Pinion GearOne 3x4mm Set Screw (1.5mm hex...

This is a 48P, 76T Spur Gear for models with Traxxas Torque Control Slipper Clutch. FEATURES:48 pitch76 toothDesigned for models with a slipper clutch.Black plastic construction INCLUDES:One spur...

This is Traxxas Ultra Premium RC Tire Glue. Only one tire glue is certified for use with the 100+mph XO-1: Traxxas Ultra Premium Tire Glue. The XO-1 relies on a high-strength tire bond to withstand...

This is the Traxxas 5000mAh 8.4V 7-Cell NiMH Hump Battery Pack with the iD Connector. This battery is perfect for vehicles like the Bandit, Rustler, Stampede, Stampede 4x4, Monster Jam trucks,...

This is the Traxxas Phone Mount for Traxxas TQi and Aton Transmitters. The Transmitter Phone Mount provides a secure mounting base for your mobile device when using it for the Traxxas app.

This is the Traxxas Power Cell 11.1V 6400mAh 25C 3S iD LiPo Battery with iD Connector. Traxxas 6400mAh 3S Power Cell LiPo packs are ideal for Rustler VXL, Stampede VXL, Stampede 4x4 VXL, and Bandit...

These are the Left and Right Steering Blocks for the Traxxas Bandit, Stampede and Rustler VXL series. FEATURES:Plastic constructionBlack in color INCLUDES:One left and right steering...

This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application.  (1- tube of grease approximately 1 oz.)

This is the Traxxas Titan 550 12 Turn Electric Motor for vehicles like the Slash, Stampede, Rustler, and Bandit.  The Titan 12T 550 modified motor is designed for incredible mod-motor power...

These are the Traxxas Heavy Duty Differential Output Yokes for the Slash 2WD, 4x4, Nitro Slash, 1/10 Rally, Stampede 2WD, 4x4, and Rustler Trucks.Includes2 output yokes2 screw pins

This is the Traxxas Stub Axle Pins and Hex Wheel Hubs Includes(2) 12 mm Composite hex wheel hubs (2) Axle pins Replacement Part ForBIGFOOTDrag SlashFord F-150 RaptorFord Fiesta ST RallyHoss 4X4...

This is the Traxxas 12mm Hex Wheel Hubs with Pins (part 3654). These are used in a large number of Traxxas vehicles, including the front of the electric Stampede 2WD, Slash 2WD, Rustler, Monster Jam,...

This is the Traxxas Velineon 3500 VXL Brushless Motor Rebuild Kit. This set includes two 5x11x4mm ball bearings, four 2.5x5mm buttonhead screws with threadlock, replacement front and rear bushings,...

This is the Traxxas 2075 Digital High-Torque Waterproof Servo. This servo puts out 125 oz/in of torque at 6V. This is a stock replacement for many vehicles, and can also be used as an upgrade to the...

These are the Traxxas 30-Degree Castor Blocks for the Rustler, Stampede 2WD XL-5 and VXL, Slash 2WD, and Nitro Slash trucks. Replacement 30° left & right caster blocks FEATURES:Black Plastic...

This is the Traxxas Male Battery Connector Set (2).  These are for use as an ESC connector. Note: 4S Traxxas ID batteries are not compatible with these connectors due to the connector shape.

This is the Traxxas TQi 2.4 GHz High Output 2-Channel Radio System with Traxxas Link Enabled and TSM 2-Ch Transmitter, 5-Ch Micro Receiver) Replaces transmitter: TRA6509R

This is the Traxxas TQi 2.4 GHz High Output radio system, 4-channel with Traxxas Link Bluetooth module and TSM 4-Ch Transmitter, 5-Ch Micro Receiver) Replaces transmitter: TRA6507R

This is a Traxxas Large Servo Saver for Futaba, Hitec, Airtronics, and Traxxas servos. This will work on most vehicles requiring a large servo saver. The servo saver protects your steering servo by...

These are the optional Traxxas Red Aluminum 59mm Turnbuckle Toe Links for the Traxxas 1/10 Slash 2WD, Slash 4x4, Rustler XL-5 & VXL trucks.Traxxas aluminum turnbuckles make it easy to add...

This is set of Traxxas Rod Ends (16 long & 4 short) with 18 hollow balls and two ball screws. These are used on most Traxxas vehicles. Set of replacement rod ends with 16 long ends and 4 short...

These are the Traxxas Spring Retainers for Traxxas Shocks. This set contains the spring retainers that hold the springs in place over the shock body and the piston heads that control the amount of...

This is the Traxxas Bigfoot #1 Body Accessories Kit. This set includes the winch, front and rear bumpers, roll bar, light bar, engine detail, and full mounting hardware.The chrome grill is sold...

These are the Traxxas Suspension Screw Pins for the Traxxas Rustler, Stampede, and Bandit. The hinge pins hold the suspension arms to the bulkheads. Features: Durable steel...

This is the Traxxas Speed Bit 3-Piece Metric Ball Hex Driver Set with 1/4" drive.  This set includes 2.0mm, 2.5mm, and 3.0mm ball end bits.  The 1/4" drive makes these perfect for use with...

This is the Traxxas Speed Bit 2-Piece Metric Ball Hex Driver Set with 1/4" drive.  This set includes 2.0mm and 2.5mm ball end bits.  The 1/4" drive makes these perfect for use with powered...

This is the Traxxas Speed Bit 4-Piece Metric Hex Driver Set with 1/4" drive.  This set includes straight tip 1.5mm, 2.0mm, 2.5mm and 3.0mm end bits.  The 1/4" drive makes these perfect for...

This is the Traxxas Stub axles, rear, heavy duty (2)/pins (2). This is Traxxas part number 6853XPart Number: 6853X / TRA6853XFits1/10 Monster Jam Trucks1/10 RallyCraniacNitro SlashRustler VXLRustler...

These are Traxxas 3x6mm Metal Washers. Each package includes 12 washers. Replacement part forDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150 RaptorFord Fiesta ST RallyHoss...

These are Traxxas 2.5x31.5mm Stainless Steel King Pins with E-clips for the electric Rustler and Stampede. Replace the stock screw pins with these heavy-duty steel suspension pins that are...

This is the Traxxas Steel Top Drive Gear for the Stampede 2WD, Slash 2WD, Rustler, and Bandit vehicles.FitsBandit XL-5 & VXLRustler XL-5 & VXLSlash 2WD XL-5 & VXLStampede 2WD XL-5 & VXL

This is the Traxxas Blue Aluminum Turnbuckle set for the Rustler, Stampede 2WD, Stampede 4x4, and Slash 4x4 trucks.FEATURES: Anodized aluminum construction Blue in color Black nylon ball...

This is the Traxxas TQ 2.4GHz 3-Channel Micro Receiver for use with the TQ 2.4GHz transmitter. The TQ 2.4GHz micro receiver uses an integrated LINK button for fast and easy binding. A two-color LED...

This is a set of four Traxxas Blue-Anodized Aluminum 4mm Lock Nuts with a Flanged and Serrated surface. Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect...

This is the Traxxas 4mm Nylon Locking Wheel Nuts (8) Set of eight 4 mm nylon locking nuts feature a serrated flange to keep them snug on the wheel during intense action FEATURES Steel serrated...

This is a 48P, 83T Spur Gear for models with Traxxas Torque Control Slipper Clutch. FEATURES:48 pitch83 toothDesigned for models with a slipper clutch.Black plastic construction INCLUDES:One spur...

This is a set of Traxxas 30-Degree Blue Caster Blocks for the Traxxas Rustler XL-5, Rustler VXL, Stampede XL-5, Stampede VXL 2WD, Slash XL-5, Slash VXL 2WD, Nitro Slash. Traxxas aluminum caster...

This is the Traxxas Big Bore Shock Set for all 1/10 Scale Slash 2WD, Slash VXL, and Slash 4x4 Short-Course Trucks. These replace the plastic shocks that come stock with the truck. Big Bore shocks...

This is a pair of Traxxas 5x8x2.5mm Blue Rubber Sealed Ball Bearings. These fit a large number of Traxxas 1/10 and 1/16 scale vehicles.Includes: (2) 5X8mm ball bearingsSpecificationsInside diameter:...