Traxxas

This is a Pair of 10x15x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate protection and less maintenance in dirty...

This is a pair of Traxxas Long Steel Shock Shafts with Chrome Finish. These are used in a large number of Traxxas vehicles. Replacement steel shock shafts with chrome finish for Traxxas long Ultra...

This is a Slipper Clutch Rebuild Kit for the Traxxas Revo 2.5, 3.3, T-Maxx 3.3, and E-Maxx 16.8V Trucks. FEATURES:Repairs damaged slipper clutches INCLUDES:(1) Spring(2) Nuts(1) Pin(1)...

This is the Traxxas 18-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory...

This is the Traxxas Replacement Servo Gear Set for 2055 and 2056 Servos. This is Traxxas part number 2053.

This is a package of six 3x6mm Traxxas Button Head Screws. Features: Steel construction Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x6mm...

These are the Traxxas Blue Aluminum Left and Right Castor Blocks for the Traxxas 1/10 Slash 4x4, Stampede 4x4, 1/10 Rally, Telluride, and XO-1 vehicles. Left and right blue aluminum caster blocks...

This is the Traxxas Big Bore Hard Anodized Shocks (XX-Long) (2) (Rear) Set of two XX-long Big Bore shocks provide ultimate dampening control. They’re formed from hard-anodized, PTFE-coated,...

This is the Traxxas Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4). This is Traxxas part number 6850XPart Number: 6850X / TRA6850XFits1/10 Monster Jam...

This is the Traxxas 21-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory...

This is the Traxxas 20-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear. The...

This is the Traxxas 19-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory...

This is the Traxxas Slash 4X4 ProGraphix Body with Front and Rear Body Mount Latch and Decal Sheet From mild to wild, choose your own colors to personalize your clipless Slash body. The detailed...

This is the Traxxas Slash 4X4 Red Body with Front and Rear Body Mounts & Support for Clipless Mounting Is it time to upgrade your Slash with an all-new look? These tough polycarbonate clipless...

This is the Traxxas Slash 4X4 Green Body with Front and Rear Body Mounts & Support for Clipless Mounting Is it time to upgrade your Slash with an all-new look? These tough polycarbonate clipless...

This is the Traxxas Sledgehammer Tires on Black Chrome 2.8 Wheels (2) w/12mm Hex Ultra-rugged Sledgehammer tires provides extreme traction and control for a variety of off-road terrain. The...

This is the Traxxas Orange 6061-T6 Aluminum Drag Link for 4x4 Rustler, Slash, Stampede. Boost your steering performance and add eye-catching looks with this strong and lightweight aluminum drag link...

This is the Traxxas Red 6061-T6 Aluminum Drag Link for 4x4 Rustler, Slash, Stampede. Boost your steering performance and add eye-catching looks with this strong and lightweight aluminum drag link...

This is the Traxxas Green 6061-T6 Aluminum Drag Link for 4x4 Rustler, Slash, Stampede. Boost your steering performance and add eye-catching looks with this strong and lightweight aluminum drag link...

This is the Traxxas Blue 6061-T6 Aluminum Drag Link for 4x4 Rustler, Slash, Stampede. Boost your steering performance and add eye-catching looks with this strong and lightweight aluminum drag link...

This is the Traxxas Differential, rear (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash, Stampede, Rustler) (13/37 ratio)The Pro-BUILT 4X4 rear...

This is the Traxxas Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash, Stampede, Rustler) (13/37 ratio)The Pro-BUILT 4X4...

This is the Traxxas Complete Transmission for 1/10 2WD Rustler, Bandit, Stampede, and Slash trucks.  This comes pre-assembled with internal gears, slipper clutch, and spur gears, making for an...

This is the Traxxas Heat Sink for 3351R and 3461 Motors. The aluminum heat sink fits Velineon 3500 and 540XL brushless motors when installed in 4X4 vehicles. (Does not fit 2WD configurations). For...

This is the Traxxas 12-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear...

This is the Traxxas Low Center of Gravity (Low-CG) Chassis Conversion Kit for the Slash 4x4 trucks.  Lower your CG, increase corner speed, and lower your lap times!  Performance-proven with...

This is the Traxxas Rear Ring and Pinion Differential Gears for the Slash 4x4, Hoss 4x4, Stampede 4x4, Telluride, 1/10 Rally, and XO-1 vehicles. 37-tooth ring and 13-tooth pinion gears for rear...

This is a pair of Traxxas 6x12mm Ball Bearings with Rubber Dirt Shields. Pair of 6x12x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Rear, +20% Rate, Blue (2) Pair of XX-long progressive-rate springs are custom-wound to provide responsive control over small bumps, with a...

This is the Traxxas Rear XX-Long Ultra Shocks (Black) Complete with Springs and Spacers (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect seal and super-smooth performance. The...

This is the Traxxas Front Black Long Ultra Shocks complete with Spring Pre-load Spacers and Springs (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect seal and super-smooth performance...

This is the Traxxas 4-Amp DC Charger. This charger can be used with 6-cell 7.2V and 7-cell 8.4V NiMH Traxxas iD Batteries.FeaturesTraxxas's iD technology automatically configures and optimizes...

This is a pair of Traxxas Long Gray Ultra Shocks, Complete with Springs, Pre-Load Spacers, and Shock Oil. Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect seal and super-smooth...

These are a set of 2.2" Mounted Satin Chrome Wheels and Tires for the Traxxas Slash, TRAC43**. FEATURES:Rear tires2.2" Satin Chrome WheelsOff-Road Racing Tires5 spoke design INCLUDES:Two 2.2" mounted...

This is the Traxxas BL-2s Waterproof Brushless ESC BL-2s Brushless Electronic Speed ControlThe waterproof BL-2s speed control delivers all the benefits of brushless technology with the safety and...

This is the Traxxas Velineon VXL-3S Velineon Waterproof ESC. This is the replacement for the ESC found in many of the 1/10 brushless trucks, designed for use with the Velineon 3500 motor. See full...

This is a pair of Traxxas 72mm Turnbuckles for use as tie rods or optional rear camber rods. This is Traxxas part number 2335.

This is the Traxxas Differential Gear Set for the Slash 4x4, Stampede 4x4, 1/10 Rally, XO-1, and Telluride vehicles. These feature hardened steel construction.INCLUDES:Two Output GearsTwo Spider...

These are the Traxxas Telemetry Trigger Magnet Holders for the TQi radio system. The telemetry trigger magnet holders secures the trigger magnet to the spur gear to provide real-time RPM and speed...

This is the Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers. This works with 2S, 3S, and 4S ID LiPo batteries to connect them to cell voltage checkers for individual cell reading...