Traxxas

This is the Traxxas 400 Digital High-Torque Brushless Metal Gear Ball Bearing Waterproof Servo. With 400 oz/in of torque, this is an awesome upgrade for Traxxas 1/10 bashers and off road vehicles...

This is the Traxxas 4mm Nylon Locking Wheel Nuts (8) Set of eight 4 mm nylon locking nuts feature a serrated flange to keep them snug on the wheel during intense action FEATURES Steel serrated...

This is the Traxxas 2-Amp Wall Charger and 3000mAh 7-Cell 8.4V Flat Pack Battery Completer Set. This set is perfect to go with vehicles like the Slash 2WD, Slash 4x4 VXL, 1/10 Rally, TRX-4, and...

This is the Traxxas 13-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear. The...

This is the Traxxas Big Bore Shock Set for all 1/10 Scale Slash 2WD, Slash VXL, and Slash 4x4 Short-Course Trucks. These replace the plastic shocks that come stock with the truck. Big Bore shocks...

This is a pair of Traxxas 5x8x2.5mm Blue Rubber Sealed Ball Bearings. These fit a large number of Traxxas 1/10 and 1/16 scale vehicles.Includes: (2) 5X8mm ball bearingsSpecificationsInside diameter:...

This is the Long Temperature and Voltage Sensor for the Traxxas TQi system. To read voltage on electric vehicles, this must be used with the Traxxas part TRA6541 Power Tap. The temperature/voltage...

This is a package of replacement Traxxas 5x8mm Teflon Washers  Set of 20 PTFE-coated 5x8x0.5 mm washers for use with bearings. FEATURES:Black teflon construction.Used on the axles and in the...

These are rubber cap diaphragms for Traxxas plastic shocks. These also work well with some Associated aluminum shocks. Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit...

These are the Shoulder Screws for the Traxxas T-Maxx 3.3. Set of six 3x12 mm shoulder screws (shock attachment screws) with hex-drive heads. FEATURES Black steel construction INCLUDESSix steel...

This is the Traxxas 2-Channel Wireless-Ready TQi 2.4 GHz Transmitter Transmitter, TQi Traxxas Link enabled, 2.4GHz high output, 2-channel (transmitter only)

This is the Traxxas TQi Transmitter Traxxas Link Enabled 2.4GHz High Output 3-Channel (Transmitter Only) TransmitterTQi Traxxas Link enabled, 2.4GHz high output, 3-channel

This is the Traxxas Transmitter TQi Traxxas Link enabled 2.4GHz high output 2-channel (Transmitter Only) The 2-channel TQi transmitter combines a full complement of tuning features with the...

This is the Traxxas TQ 2.4GHz 2-Channel Transmitter.   (Transmitter Only) Switch on the power and drive! That's all there is to it with the TQ 2.4GHz radio. There are no frequencies to...

This is the Traxxas TQ 2.4GHz 3-Channel Transmitter.   (Transmitter Only) Switch on the power and drive! That's all there is to it with the TQ 2.4GHz radio. There are no frequencies to...

This is the Traxxas 7.2V 3000mAh NiMH Battery with iD Connector. This is stock replacement battery for the Traxxas Blast boat.Features:New high current connector with gold-plated copper terminalsiD...

This is the Diff Carrier/Gasket Set Replacement differential carrier includes X-ring gaskets (2), ring gear gasket, and 6x10x0.5 mm washer. FEATURES:Plastic Diff CarrierBlue Rubber Shaft GasketsBlack...

This is the Traxxas 5000mAh 7.4v 2-Cell 25C LiPo Battery (short/137mm). This new shorter design allows this 2S 5000mAh pack to fit in tighter compartments, making it a great option for Stampede 2WD,...

These are the Traxxas 3655X Left and Right Suspension Arms, for the Rustler (rear), Stampede 2WD (rear), Stampede 4x4 (front/rear), Slash 4x4 (front/rear), 1/10 Rally (front/rear), 1/10 Monster Jam...

This is the Diff Oil Kit for the Revo by Traxxas. Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower...

This is a pair of Traxxas Slash Paddle Tires Mounted on Chrome Wheels. These fit the Slash 4x4 front and rear, or the Slash 2WD rear. Put these on your truck for added grip on sand, snow, mud, or the...

This is a set of Traxxas Stub Axle Pins.  These pins slide through the axle and keep the wheel hexes from spinning on the axle. Set of four stub axle pins Replacement Part For4-Tec 2.0 AWD...

This is the Traxxas Antenna Cap Set with Antenna Spool. The antenna spool is used for wrapping excess antenna wire before inserting it in the antenna tube to prevent wire from hanging out the end of...

This is the Traxxas Rear Steel-Spline Constant-Velocity Driveshafts (Complete Assembly) (2) Traxxas steel constant velocity driveshafts offer the ultimate in torque handling and efficient power...

This is the Traxxas Battery Expansion Kit for the Traxxas Slash 2WD and 4x4 trucks (standard Slash 4x4 chassis only - Not for low-CG, Platinum, or Ultimate). It allows for use of larger battery...

This is pack of Traxxas DC Charger 5-Amp Fuses (2). These are replacements for use in the 2-amp and 4-amp DC 12-volt cigarette-lighter style quick chargers included with many of the Traxxas electric...

This is the Traxxas 6-Cell 7.2V 4200mAh iD NiMH Battery Pack. This is a great way to extend the run-time on the Traxxas Blast boat. This can also be used in vehicles like the Slash, Rustler,...

This is the Traxxas 17mm Splined Wheel Nut Wrench. This is a must-have for vehicles equipped with 17mm wheel nuts. Use this splined wheel wrench for extra leverage on 17 mm hex nuts. Replacement Part...

This is a set of Traxxas 10x15mm Ball Bearings for use on the Traxxas Revo and other vehicles. Features: Steel Construction Shielded with blue rubber seals Includes: Two Ball...

This is a Traxxas Steel Slipper Clutch Shaft for the Slash, Rustler, and Stampede vehicles. Features: Steel construction Roll pin pre-installed Includes: One slipper clutch...

This is the Slipper Clutch Rebuild Kit for the Traxxas Vehicles. The slipper clutch rebuild kit refreshes the standard-duty slipper clutch with a new disc, friction pads (3), springs (2), dowel pin,...

This is the Traxxas Premium Shock Oil Set with Spinning Carousel Rack FeaturesSeven precise viscosities ranging from 20wt to 80wt100% silicone oil for maximum consistencyPrecision-pour, twist-nozzle...

This is the Traxxas aluminum blue-anodized shock caps Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined caps fit...

This is a set of 12 Traxxas 3mm Locking Nuts. These feature chrome nylon locking nuts. Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBIGFOOT No. 1 Officially...

This is the Traxxas 2075X Digital High-Torque Metal Gear Waterproof Ball Bearing Servo. This is the stock steering servo on the TRX-4 Trail Crawler. It can be used as an upgrade for any 1/10 Traxxas...

This is a set of Traxxas Long Rod Ends with Hollow Ball Connectors. Each package contains six rod ends and six hollow balls.Fits1/10 Monster Jam Trucks1/10 RallyBandit XL-5CraniacE-MaxxNitro...

This is the Traxxas Temperature Sensor Mount for Electric Motors when using the TQi Telemetry System. Includes: Mount, Plastic Tie, and Thermal Pad The temperature sensor mount secures the...

This is the Traxxas Alloy Slipper Pressure Plate and Hub for the Revo 2.5, 3.3, E-Revo, E-Revo Brushless, E-Maxx 16.8V, and E-Maxx Brushless trucks. These are part of the slipper assembly.

This is a Traxxas M0.8P, 52T Spur Gear. FEATURES M0.8 pitch 52 tooth Black plastic construction Compatible with 32P pinion gears INCLUDESOne M0.8P, 52T Spur Gear SPECSPitch:   M0...

This is the Traxxas Velineon 3500 4-Pole Brushless Waterproof Motor. This is the replacement motor found in many of the 1/10 brushless trucks, designed for use with the VXL-3s ESC. See full list of...